VEVOR A02D.2056 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
SIDEBOARD
MODEL: A02D.2056
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MODEL: A02D.2056
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
SIDEBOARD

- 2 -
Warning-To reduce the risk of injury, user must read instructions
manual carefully.
Wear eye protection.
Wear protective gloves
SAFETY WARNINGS AND PRECAUTIONS
Thank you for using this product. In order to make sure that you can operate the
machine correctly, read this instruction carefully before operation and keep it
properly for future reference. Please be sure to read the precautions and safety
rules in this page to ensure your safe use. This manual will outline safety warnings
and precautions, operating, maintenance and cleaning. The warnings and
instructions reviewed in this manual cannot cover all possible conditions and
situations that may occur. Caution and common sense are not built into this
product, since we believe that the uses will comply with these codes.
Please read ALL the instructions before using your machine.
1. Assemble needs to follow these instructions. Incorrect assembly can be a
hazard.
2. Wear safety goggles and heavy-duty work gloves during assembly.
3. Do not assemble when tired or when under the influence of alcohol, drugs or
medication.
4.Weight and other product properties are only applicable to correctly and
completely assembled products.
5. Keep the assembly area clean and well-lit.
6. Keep bystanders out of the area during assembly.
7. This product is not a toy. Do not allow children and pet to play with or approach
this item.
8. Use as intended only. Do not sit or stand on the product.
9. Inspect before every use. Do not use it if parts are loose or damaged.
10. For indoor use only.

- 3 -
11. Do not exceed the listed weight capacity. Tighten all knobs securely before
applying load. Be aware of dynamic loading! The sudden load movement may
briefly create an excess load, causing product failure.
12. Do not apply this unit to any other purposes than the indicated usage.
13. Do not use it outdoors or for commercial purposes. INDOOR USE ONLY.
14. DO NOT CLEAN IT WITH ANY ABRASIVE MATERIAL.
15. Never leave it unattended while in use.
17. Pay attention to hand injuries caused by drawer pinching!
18. Do not place the product on or near hot air, electric burners or heaters.
19. Do not place in a damp environment.
20. The product should be placed on a flat surface.
WARNING: TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
20. Attention: An anti tipping device must be installed to securely secure the
product to the wall (Ensure the reliability of the wall itself).
21. This appliance is not intended for use by young or infirm persons unless
supervised by a responsible person to ensure that they can use the
appliance safely. Young children should be supervised to ensure that they
do not play with the product. Children and pets should stay away from the
product.

- 4 -
PRODUCT PARAMETERS
MODEL
Loading Capacity
A02D.2056
Max50Kg（About 110LBS）
CAUTION:
1. Do not place all the weights on the same layer!
2. Place the weight evenly on each layer plate to achieve the maximum bearing
capacity!
ASSEMBLY STEPS
1. Please dispose of all plastic bags carefully and keep them away from children
and pet.
2. Check all components provided according to the list in this manual.Make sure
you have all of the parts listed.
3. Whilst every care is taken in the manufacture of this product, care must be taken
during assembly in case sharp edges are present.
4. Wear eye protection, protective gloves, during assembly and using.
5. The product should be placed on a flat surface.
6. The product requires two people to assemble.
7. The product requires the use of a rubber hammer and a Phillips screwdriver
(Rubber hammer and cross screwdriver need to be purchased by oneself).
8. If uneven product gaps are found, they can be disassembled and adjusted.
Attention: An anti tipping device must be installed to securely secure the
product to the wall (Ensure the reliability of the wall itself).

- 5 -
Note: the quantity of parts shown in the manual is the actual usage and the
unused parts are spare parts.

- 6 -

- 7 -

- 8 -