VEVOR DESK CONVERTER ZWE-ZSZ-02 User manual

Technical Support and E-Warranty Certificate https://www.vevor.com/support
DESK CONVERTER
USER MANUAL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

1
MODEL NO.: ZWE-ZSZ-02
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
Desk Converter

2
WARNING:
Please read this manual carefully before using the product. Failure to
do so may result in serious injury. SAVE THIS MANUAL
Check carefully to make sure there are no missing or defective parts,
mproper installation macause damage or serious injury. Do not use
this product for any purpose that is not explicitlyspecified in this
manual and do not exceed weight capacity. We cannot be liable for
damage orinjury caused by improper mounting, incorrect assembly,
or inappropriate use.
PINCH POINT
DO NOT place hands on or near support bars.Moving parts can crush
and cut.Pinch points arecreated during lifting and lowering the
worksurfaceFailure to follow these instructions may result inserious
personal injury.
ASSEMBLY PRECAUTIONS
1.Assemble only according to these instructions. Improper assembly can
create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during
assembly.
3.Keep assembly area clean and well-lit.
4.Keep bystanders out of the area during assembly.
5.Do not assemble when tired or when under the influence of alcohol,
drugs or medication.
6.The product capabilities apply to properly and completely assembled
products only.
7. Assemble on a flat, level, hard and smooth surface capable of safely
supporting the acrylic table.

3
USE PRECAUTIONS
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
1. This product is not a toy. Do not allow children to play with or approach
this item.
2. Use as intended only. Do not sit or stand on the table.
3. Inspect before every use. Do not use it if parts are loose or damaged.
4. Use only on flat, level, and hard surfaces.

4
ASSEMBLY INSTRUCTIONS
For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram of this manual. Unwrap and separate all
parts on a clear work area.
TECHNICAL SPECIFICATIONS
Model
ZWE-ZSZ-02
Main Material
Steel + Board
Color
Black
Product Dimensions
(LxWxH)
910*790*505 mm
Packing Size
(LxWxH)
980*700*160 mm
Net Weight (kg)
13.45
Gross Weight (kg)
14.6
PACKAGE CONTENTS

5
ASSEMBLY STEPS
STEP1
STEP2
STEP3
Do not press the release handle while in thepackage. Only press the
release handle in anupright position.
不要在包装内按释放手柄。只能在竖直摆放好产品位置时按压释放手柄

6
STEP4
COMPLETION

7
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: VEVOR STORE INC, 9448 RINCHMOND PL #E
RANCHO CUCAMONGA, California, 91730 United States of America
REP
EC
SHUNSHUN GmbH
Römeräcker 9 Z2021,76351
Linkenheim-Hochstetten,Germany
REP
UK
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions
Preston, United Kingdom

Support and E-Warranty Certificate https://www.vevor.com/support