VEVOR LDH07 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
FURNITURE DOLLIES
MODEL: LDH07
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MODEL: LDH07
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
FURNITURE DOLLIES

- 2 -
SAFETY INSTRUCTIONS
WARNING:
1. Please do not put it near flammable materials.
2. It is forbidden to carry people under any condition.
3. This product cannot be used to go up or down stairs.
4. Overload is strictly prohibited.
5. Don't move too fast when passing pothole areas.
SAVE THESE INSTRUCTIONS
MODEL AND PARAMETERS
Model: LDH07
Material: Plastic+Alloy Steel
Product size: Minimum 16x16 inches, maximum 27x27 inches
Load capacity: The normal load is 110 pounds, and the maximum load
does not exceed 400 pounds.

- 3 -
ASSEMBLY AND USE
1. Get everything ready.
2. Use screws to fix 4 wheels.

- 4 -
3. Fix 4 cylindrical support seats with screws, and then place 4 stainless
steel square tubes as shown in the picture below.
4. Insert stainless steel square tube and adjust to the proper size, then
lock 4 buckles.

- 5 -
5. Stick shock absorption mats in 4 corners of the base.
6. Rotate to the proper height to keep the base flat.

- 6 -
MAINTENANCE
1. Avoid prolonged exposure to the sun to avoid aging.
2. Inspect accessories for wear, cracks and other damage before use, and
replace defective accessories immediately.
Sanven Technology Ltd.
Address: Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
Made In China

Technical Support and E-Warranty Certificate
www.vevor.com/support