VEVOR YX-K450-100 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
KEY CABINET
MODEL:YX-K450-100
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

1
MODEL:YX-K450-100
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
KEY CABINET

2
SAFETY INSTRUCTIONS
Thank you very much for choosing this product. Please read all of the
instructions before using it.The information will help you achieve the best
possible results.
1. ASSEMBLY SAFETY
PLEASE NOTE! Drawings in this manual are for illustration purposes only
and in some details may differ from the actual product.
. Assemble only should be according to these instructions. Improper
assembly can result in hazards.
. Wear ANSI-approved safety goggles and heavy-duty work gloves during
assembly.
. Keep the assembly area clean and well-lit.
. Keep bystanders out of the area during assembly.
. Do not assemble when tired or when under the influence of alcohol, drugs
or medication.
. The product capabilities apply to properly and completely assembled
products only.
. Assemble on a flat, level, hard and smooth surface capable of safely
supporting the key cabinet.
. For additional information regarding the parts listed in the following pages,
please refer to the Assembly Diagram of this manual. Unwrap and
separate all parts in a clean work area.
2.USAGE SAFETY
ATTENTION! Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in serious injury or even
death.The terms ,device" or product" are used in the warning sand
instructions to refer to KEY CABINET.
lf you are unsure about whether the product is operating correctly or if you
find damage, please contact the manufacturer's service centre.Only the

3
manufacturer's service centre may make repairs to the product. Do not
attempt to make repairs yourself!Keep the device away from sources of fire
and heat.
3.USE GUIDELINES
The product is intended for storing keys out of reach of unwanted persons -
it has a key lock. For better organization it has key hangers and an
organizer.CAUTION: Do not store a spare lock key inside the box!
SAVE THESE INSTRUCTIONS
TECHNICAL PARAMETERS
Model
YX-K550-200
Colour
Black
Max number of key hangers
200
Size
550*380*138 mm
N.W.
9.16 kg
G.W.
10.44 kg
Material
Cold Rolled Steel DC03, 0.8mm
Lock
Key lock with 2 keys

4
PARTS LIST
English Manual*1
Key*2
Hangers segment*20
Key Hanger*200
M6*25 Screw*4
M6*80 Screw*2
M6 Nut*4
Expansion screw set*4
（M3.5*30）
+

5
STEP1
Remove the installed separator plate on the bottom of the cabinet ,the 4
nuts will be used to install the separator plate in step 2.
ASSEMBLY STEP

6
STEP2
Align the hole positions of the separator plate and the
Cabinet,Thread the M6 bolts through the holes and screw on the nuts
that disassembled in step1.

7
STEP3
Mount the key cabinet to the wall with the expansion screw sets
according to the holes（Φ6mm）drilled in the wall.

8
STEP4
Install the Hangers segments on the cabinet.First the long side then the
short.

9
STEP5
Then you can use the cabinet to hang on the keys as below..

10
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD
NSW 2122 Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim
Place, Rancho Cucamonga, CA 91730
REP
UK
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions
Preston, United Kingdom
REP
EC
SHUNSHUN GmbH
Römeräcker 9 Z2021, 76351
Linkenheim-Hochstetten, Germany
Made In China

11

Technical Support and E-Warranty Certificate
www.vevor.com/support