VEVOR RB-0200 User manual

Support and E-Warranty Certificate
https://www.vevor.com/support
WATER STORAGE TANK
USER MANUAL
We continue to be committed to offering tools at competitive prices. "Save Half", "Half Price",
or any other similar expressions used by us only represent an estimate of savings you might
benefit from buying certain tools with us compared to the major top brands and do not
necessarily mean to cover all categories of tools offered by us. You are kindly reminded to
verify carefully when placing an order with us if you are saving half in comparison with the top
major brands.

1
MODEL:RB-0200/RB-0380
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
WATER STORAGE
TANK

2
NOTES
1. Place the fully installed barrel under the desired water source, such as a
downspout. Water intake is through the filtered hole on the top of the barrel. The
top of the barrel can also be unzipped for water intake or removal in bulk.
2. The water barrel may not take form and be fully stable until some water is filled
into the container. It is recommended to place the barrel in your desired location
after installation and prefill some water into the container.
3. All joints have been installed in advance. If there is water leakage, please check
and tighten the joints.
MODEL AND PARAMETERS
Model
RB-0200
RB-0380
Capacity
53Gallons
100Gallons
Material
PVC
PVC
Ambient
temperature
-30℃～+70℃
-30℃～+70℃
Color
Black
Black
Product Size
Φ60*74cm
Φ70*103cm

3
TRUCTURE DIAGRAM
1.Top zipper 2.Bottom outlet(3/4")
3.Top filter hole 4.Overfall gap
5.Scale 6.Central outlet
7.Supporting foot
COMPONENTS
No.
PART
NAME
QTY
1
Rain barrel
1
2
Lotus base
6
3
Pillar
6
4
Patch
2
5
Planting label
25
6
User manual
1

4
USE
1. After getting the product, unroll the rain barrel (Zipper/filter hole side is the
top). Keeping the outlet valve closed, fill in the liquid from the top.
2. Install 6 supporting foot strips and start to use.
MAINTAIN AND STORAGE
1. Please use mild detergent and water for cleaning.
2. Don't scrub with hard objects like brushes.
3. Dry before storage.Do not store in a dark, damp place.
4. Clean the debris at the filter port in time to avoid clogging.
5. If the barrel body is damaged, it can be repaired with the attached patch (Please
bring your own glue).
6. If the joint is leaking, tighten the joint or wrap waterproof tape(Provide for
yourself) on the thread of the joint before installing it(As shown below).
Note: If you install and remove the connector yourself and the switch is not vertical,
try increasing the number of winding laps of waterproof tape.

5
Manufacturer: Haining Tak Techtextil Industries Co., Ltd.
ADD: No. 2, Qingyuan Road, Xieqiao Town, Haining City, Jiaxing City, Zhejiang
Province, China
Importer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
Importer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
Made in China

Support and E-Warranty Certificate
https://www.vevor.com/support