VEVOR TM18-S-D User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
LEAF TRIMMER
MODEL:TM18-S-D(19")
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MODEL:TM18-S-D(19")
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
LEAF TRIMMER

- 2 -
Warning-To reduce the risk of injury, the user must read the
instructions manual carefully.
This symbol, placed before a safety comment, indicates a kind
of precaution, warning, or danger. Ignoring this warning may
lead to an accident. To reduce the risk of injury, fire, or
electrocution, please always follow the recommendation shown
below.
Alternating current
Warning- Be sure to wear eye protectors when using this
product.
Warning- Be sure to wear gloves when using this product.
IMPORTANT SAFETY INSTRUCTIONS
WARNING：
Read all safety warnings, instructions, illustrations and specifications
provided with this product. Failure to follow all instructions listed
below may result in product damage or serious injury.
Basic Safety Information:
1. Never place your fingers, gloves or any other body part in contact with
the grate or the blade.
2. Never apply pressure on the grate.
3. Please pay attention to the cutting surface during operation to ensure
the safety of workers. Do not use scissors, knives or any instrument above

- 3 -
the grate.
4. Safety glasses and gloves are required at all times.
5. The gloves have to be tight enough so they don't get inside the grate
slots. A loose glove is dangerous.
6. There is no abnormal phenomenon after the power is switched on.
7. It must be placed on the horizontal plane in order to avoid danger due to
shaking back and forth during use.
8. Please unplug the power of the leaf trimmer before cleaning, assembling
or disassembling.
9. Do not place the product within the reach of children. Children should be
supervised to ensure that they do not play with the leaf trimmer.
10. This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the appliance.
Children shall not make cleaning and user maintenance without
supervision.
11. Don't unplug the leaf trimmer before it stops operation.
12. If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
13. Electric Shock Danger! Non-professional personnel is forbidden to
repair the products. Otherwise, it may result in electrical shock. When
failures happen, it should be repaired by qualified maintenance personnel.
14. WARNING! It is strictly prohibited to put the main body into the water to
clean. Only can be scrubbed with a wet towel. The leaf trimmer must be
fully cool before cleaning.
15. Please check that the specified supply voltage in the product is
consistent with the supply voltage(AC only).
16. Avoid power cord damage. Do not squeeze, bend or friction it. Keep it
away from heat sources and open fires. The power cord should not touch
the blade.

- 4 -
17. Power cord should be laid fiat. Do not pull the power cord and make the
product fall down, which may cause damage.
18. Do not use the product on wet ground. Do not touch the product or
power cord plug with wet hands.
19. Do not disassemble the product at will. Do not let something enter or
insert into the product, which may cause damage.
20. Only accessories provided by the seller or manufacturer can be used
for the product. We will not be responsible for any failure caused by the use
of accessories from other manufacturers, which are not covered by
warranty.
21. Do not use the product on uneven, damp, not heat-resistant surfaces to
avoid damage or failure.
22. Do not place the product directly on the fire or near the source of the
fire. Otherwise, the product will be damaged or even result in danger.
23. When the plug is plugged into the socket, it must be plugged into the
end. Otherwise, it will cause the components to overheat and burn due to
poor contact.
24. Do not leave the product to work with no one watching. If the machine
is overheating, please stop working immediately and unplug the power.
Please Note:
The manufacturer does not accept any responsibility for damages caused
to or by the trimmers resulting from inadequate use or assembly. Please
use the trimmers in accordance with existing laws and regulations.

- 5 -
SAVE THESE INSTRUCTIONS
Basic parameters
Package size（mm）
575×540×475
Size（inch）
19
N.W（kg）
11.6
G.W（kg）
13.8
Operating mode
Electric
Main Material
304 Stainless steel and 201 Stainless
steel
Container
Nylon mesh bag
Motor
BLDC 60W
Motor rotate speed(rpm)
1080
Voltage
AC 120V~
Frequency
60Hz
Cutter speed
3-speed control
Transmission ratio
1:24
Service life
1-year warranty
OPERATION
1. Selecting the speed:
Speed 1: 760r/min
Speed 2: 920r/min
Speed 3: 1080r/min

- 6 -
2. Placing the untrimmed plants on the blade grate.
a. Place plants on top of the blade grate
b. Move back-and-forth and rotate it at the same time.
c. The fan will roll the plants into the gearbox, and the blades cut the
plants.
Notice: Make sure to wear gloves when operating this step
3. Getting the large buds/fruit
Remove the stainless steel bezel, and buds/ fruit will be swept into the
pipeline.

- 7 -
4. Overturning the trimmer: Overturn the trimmer to get the buds/ fruit is
also available.
5. Switch on:
Connect the power supply and turn on the leaf trimmer with the green
button.
6. Switch Off:
Switch off the trimmer by pressing another side of the green button. And
then cut off the electricity.
Sanven Technology Ltd.
Address: Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Technical Support and E-Warranty Certificate
www.vevor.com/support