VEVOR JX50 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
RATCHET POWER PULLER
MODEL: JX50
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MODEL: JX50
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
RATCHET POWER
PULLER

- 2 -
SAFETY INSTRUCTIONS
1. Do not use the ratchet power puller when the vehicle is in gear or the
"P" (parking brake) position. This may damage the vehicle's transmission.
2. Before use, the cable should be straightened and not twisted to avoid
breaking the rope.
3. Keep hands, clothing, hair, and jewelry clear of the cable/gear when
using the ratchet power puller.
4. Do not wrap the cable around the load, and do not hook the load directly
onto the cable. This could damage the load and twist or fray the cable.
5. Do not use the ratchet power puller if the cable is frayed, twisted, or
damaged.
6. Do not allow anyone to stand near the cable/in the cable pulling
line/behind the hand puller while it is on.
7. Never pass over the hand puller or steel cable during use.
8. Against the parameter table, do not overload fracture tension!
9. Never use other levers or tubes to put force on the tightener handle.
10. Subjecting the wire tightener to sudden shock-loading energy is
prohibited.
11. It is prohibited to let the wire rope over/close to or around the corner
sharp corner, which will cause the wire rope to be cut off.
12. The product is solely for pulling purposes on loads or pulling two
cables together within the product’s technical specs.
13. The product is not intended for hauling floating vessels, nor not for
professional and/or industrial applications.
14. Do not use the ratchet power puller for hoisting or lifting operations; for
this type of application, the hoist must comply with particular safety
requirements.
15. The ratchet power puller in this operation manual is not intended for
transporting people.

- 3 -
MODEL AND PARAMETERS
Model
JX50
Capacity
5T
Rope Type
Wire Rope
Rope Diameter/Length
Φ6.5mm/3.5m
Description
3 Hooks&Double Gear
Double Rope Span
2m
Single Rope Span
3.6m
Breaking Tension
5.58T
STRUCTURE DIAGRAM
1. Handle 2.Pawl Spring Switch 3.Drive Pawl 4.Ratchet 5.Stop Pawl
Trigger 6.Anchor Hook 7.Load Hook 8.Wire Rope 9.Guard

- 4 -
COMPONENTS
No.
Picture
Name
Qty
1
Ratchet Power Puller
1
2
User Manual
1
OPERATION
CHECK THE HAND PULLER CAREFULLY BEFORE USING IT !
Suggestion: The best way to get acquainted with how the hand puller
operates is to carry out a few test runs before you actually use it.
Note: It may be difficult to pull out the rope if it is fully packed. Please
reserve an appropriate length outside !
Step 1: Switch the pawl spring to the upper unlock position in order to
release the pawl.
Flip up to unlock.

- 5 -
Step 2: Flip the handle to the opposite side, hold the trigger
simultaneously, the wire rope can be pulled out.
Step 3: Reset the handle, switch the pawl spring back to original
position to lock the pawl.
Flip up to unlock.
Flip down to lock.

- 6 -
Step 4: The wire rope will be retracted when you push and pull the
handle back and forth.
Note: In case of stacking the wire rope on one side, you may use your
finger to guide the rope while retracting.
MAINTENANCE
1. Lubricate the wire rope regularly and check for wear and broken wire.
2. Be sure to wipe the product with a dry cloth after use in harsh
environments, such as bad weather or by the sea.
3. Keep away from fire.

TechnicalSupport and E-Warranty Certificate
www.vevor.com/support