VEVOR LF-QFGGL-38 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
HEAVY DUTY DOG CRATE
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MODEL:LF-QFGGL-38/LF-QFGGL-42/LF-QFGGL-46
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
HEAVY DUTY DOG CRATE

- 2 -
WARNING:
Read this material before using this product. Failure to do so can result in serious
injury.
Assembly precautions
1. Assemble only according to these instructions. Improper assembly can create
hazards.
2. In order to ensure your own safety, please make sure to ANSI-approved
safety goggles and heavy-duty work gloves when installing this product.
3. Keep the assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs or
medication.
6. Product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of safely supporting
a fully loaded Heavy Duty Dog Crate.
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or near this item.
Please keep small spare parts out of children's reach.
3. Use only on a flat, level, hard and smooth surface capable of safely supporting a
fully loaded Dog Crate.
4. Use as intended only.
5. Inspect before every use; do not use if parts are loose or damaged.
SAVE THESE INSTRUCTIONS

- 3 -
SPECIFICATION
Model
LF-QFGGL-38
LF-QFGGL-42
LF-QFGGL-46
Cage size
38inch/
950*650*810 mm
42 inch/
1070*770*940 mm
46 inch/
1190*810*990mm
Material
A195
A195
A195
Pipe Size
Galvanized square
pipe
20x20x0.6nm
20x10x0.8nm
Galvanized square
pipe
20x20x0.6nm
20x10x0.8nm
Galvanized square
pipe
20x20x0.6nm
20x10x0.8nm
38 Inch Components

- 4 -
42 Inch Components
48 Inch Components

- 5 -
Assembly Instructions
From the package and place
corner of the base.
1. Take out the folding pet
cage from the package and
place it flat on the ground.
2. Install the universal
wheels at four corners of
the base.
3. Unfold the folded mesh
board and install the top
frame on it. The tail is fixed
with screws and locking
plate assemblies.
4. Install a small door in the
front of the front, and install
two two-inch hinges and
two lock plates. Add two
components on the other
side.

- 6 -
5. Install the tray at the bottom.
Address: Baoshanqu Shuangchenglu 803long 11hao
1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA
STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166
Anaheim Place, Rancho Cucamonga, CA 91730
Made In China

Technical Support and E-Warranty Certificate
www.vevor.com/support