VEVOR NS-PS6 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
SHIPPING SCALE
MODEL:NS-PS6 PS-400
NS-PS7 PS-500
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MODEL:NS-PS6 PS-400
NS-PS7 PS-500
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
SHIPPING SCALE

- 2 -
Warning-To reduce the risk of injury, user must read
instructions manual carefully.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:(1)This device may not cause
harmful interference, and (2)this device must accept any interference
received, including interference that may cause undesired operation.
1. Place this scale on a hard, non-vibrate, flat surface for weighing.
2. Avoid strong electrical or magnetic fields.
3. It can’t be used in excessive temperature changes area.
4. Cleaning by using a mild detergent.
Do not dismantle the unit, This will cause to damage the scale, as the
result not Covered by the warranty.
This scale is operated by 4 pcs of AA size batteries and an adaptor(adaptor
included), if the scale Stop for operating over a month, it needs to be taken
out all the batteries from the battery slot.

- 3 -
1) ON/OFF: Press this button to turn on or turn off the scale.
2) MODE: Press this button for changing weighing modes, kg → lb → oz
→ lb-oz, and another usage is for Re calibration scale.
3) TARE: Press this button to zero for tare operation.
4) HOLD: Press this button to lock the weighing value.
5) C/R: press this button to switch on/off the Auto lock function
6) PCS: Press this button for pieces counting function.
1) Press “ON/OFF” button to turn on the scale, once the display shows:
0.00, the scale is ready for use.
2) Press “MODE” button for changing weighing modes: kg → lb → oz
→ lb-oz (Re-circle)
3) Press “TARE” button to subtract the weight of vessel or container,
restore the readout To zero.
4) Press “HOLD” button to keep the weight value.
5) Press “C/R”: button for turning on the auto lock function,and press
“C/R” button again to turn off the auto lock function,you have to press
button “HOLD” for locking the screen data.
6) Turn on the scale by pressing the “ON/OFF” button, press “PCS”
button show: 0 pc. Press “PCS” button again, display will show: PC 25,
place equivalent 25 units objects on the middle of weighing platform,
such 25 units’ shape,weight need to the same, (but all the objects total
weight not over the weighing capacity), press “PCS” button again,
schedule complete, 25 pcs weight’s memory storage in scale. This
steps same as PC 50, PC 100 operate.

- 4 -
This scale had been calibrated in factory before shipment, however, from
time to time, there is a remarkable change in temperature or humidity
changed, there might be inaccuracies, in this case, there needs to
re-calibrate the scale again.
When the scales is powered off, press the “ON/OFF”key until to show: PE
xxx, release it and immediately, press both “ON/OFF” and “MODE” keys at
the same time until to show: E – 100, Press “MODE” key again will show: E
– 50, E – 25, E – 10, E – 5. Place a Standard calibration weight: 100kg or
50kg or 25kg or 10kg Or 5kg on the middle of the platform according to the
LED shown digit,(For example: E – 10, place a standard 10 kgs calibration
weight), until The LED shows: “Good”, calibration is over.
Attention: more weight, more accuracy after calibration.
Display show: “H” to mean: the scale has exceeded the weight limited
(over loaded)
Display show: “-E” to mean: the batteries power are too low, it needs to
replace the Batteries or be Operated by adaptor.

- 5 -
Items Description
1 Name Shipping Scale
2 Model NS-PS6 PS-400
3 Parameter
Rating(s)：4x1.5AA or 5Vdc，Capacity:400kg/880Ib,
Division:100g
4
Package
Size 1105x635x70mm
5 G.W. 14KG
Items Description
1 Name Shipping Scale
2 Model NS-PS7 PS-500
3 Parameter
Rating(s)：4x1.5AA or 5Vdc，Capacity:500kg/1100Ib,
Division:100g
4
Package
Size 1105x635x70mm
5 G.W. 14KG

Manufacturer: Guangdong Hostweigh Electronic Technology Co.,Ltd.
Address：1-5/F, J Building , Liu's Developing Industrial park, Liheng Road,
Shipai Town, Dongguan City, Guangdong
Made In China

Technical Support and E-Warranty Certificate
www.vevor.com/support