- 4 -
Button Functions
1.ON/OFF Button: Pressing this button will turn the scale on and off
2.TARE Button: Pressing this button will tare the weight of the load. The
tare function will eliminate the weight put on the scale, such as a container
or vessel. This will give the weight only of the items added to the container.
3.MODE Button: Pressing this button changes the unit of measure for the
scale.
4.HOLD Button: Press HOLD botton to lock the readout, even if you take
away items, the readout will keep on.
1.Please put scale on a level platform.
2.Please put batteries into the scale or plug the adapter into scale.
3.Press the “ON/OFF” bottom to turn the scale on.
4.Wait until the display shows “0” (zero) before placing any weight on the
scale.
5.Carefully place item(s) on the platform.
6.After a few seconds, the weight will stabilize and you can now get weight
data from the LCD display.
7.Press the “MODE” button, you can switch between weighing units.
8.You can set auto-off time by following method: long press TARE button to
choose auto-off time, press TARE button to shift from "1" "3" "5"
"-"(OFF), press MODE button to confirm.
