VEVOR DC666-120V User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
POOL COVER PUMP
OPERATING INSTRUCTION
MODEL:DC666-120V
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MODEL:DC666-120V
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
POOL COVER PUMP

- 2 -
Warning-To reduce the risk of injury, user must read
instructions manual carefully.
DESCRIPTION
The Pool Cover Pump has been designed to be the fastest, easiest, and
most affordable draining solution from a pool cover on the market.
The unit is equipped with a 25 ft 2-prong grounding type power cord, which
plugs into any standard 110-volt wall outlet.
Complete with a compact 16-foot drain hose and an exclusive adapter, this
hassle-free kit requires just seconds to set up, allowing you to leave your
garden hose where it belongs in the garage.
The kit has a 3/4" adapter that can be used for convenient attachment to
your standard garden hose.
PRODUCT FEATURE
1.Made of enhanced ABS raw material, strong and durable.
2.Ultra-quiet design, efficient operation.
3.Resin filling sealant, IPX8 waterproofing, and leakproof.
4.Built-in high-sensitive temperature control core piece. The water pump
starts temperature control and protection function, preventing dry
burning.
5.Good water resistance, high insulation strength, and safety in use.

- 3 -
TECHNICAL SPECIFICATIONS
Model
DC666-120V
Size
161*120*100mm
Rated Voltage
AC-120V
Maximum Power
75W
Max lift
12 ft
Max Flow
540 GPH
Water Nozzle Diameter
1/2"
The Power Cord Length
25 ft
PRODUCT LIST
Description
Quantity
Pool Cover Pump
1
1-inch hose adapter
1
3/4 inch garden hose adapter
1
1/2 inch brass hose adapter
1
16 ft anti-kink drain hose
1
Mesh bag
1
Operating Instruction
1

- 4 -
OPERATION STEPS
Step.1
Connect the drain-pipe
Step.2
Position on the pool cover
Step.3
Plug into the outlet
Step.4
After the water draining, pull the plug out
CLEANING STEPS
When there are sundries entering the interior and affecting the operation of
the pump, please refer to the following steps to clean up the sundries.

- 5 -
Step.1 You need to use a flat screwdriver to
pull out the 4 buckles.
Step.2 Separate the base from the motor
Step.3 Use a flat screwdriver to pull out the
3 buckles carefully; otherwise, the buckles
will be damaged
Step.4 Take out and clean the impeller. After
cleaning, reinstall the pool pump according to
the disassembly steps.
GENERAL SAFETY
Read the manual(s) included with this product carefully. Be thoroughly
familiar with the controls and the proper use of the equipment. Follow
all instructions.

- 6 -
Only persons well acquainted with these rules of safe operation should
be allowed to use the unit. Keep away from children!
DANGER
This pump is NOT rated for use with flammable/combustible liquids
vapors or dust. Do NOT use to pump flammable/combustible liquids
vapors or dust. Do NOT use in a flammable and/or explosive
atmosphere. The pump SHOULD be used to pump clear water ONLY.
Failure to follow these instructions WILL result in serious injury or
death.
Do NOT disassemble or alter this product in any way. Failure to follow
these instructions WILL result in serious injury or death.
APPLICATION AND OPERATION
DANGER
Do NOT use the pump if any part of the housing switch or probe is
cracked, broken, or missing.
Always disconnect the electric supply before attempting to install,
service, relocate, or perform any maintenance. If the power source is
out of sight, lock and tag in the open (off) position to prevent
unexpected power application. Failure to do so WILL result in fatal
electrical shock!
Made In China
WARNING:Risk of electric shock.NEVER place the pump in pools
while people are in the water. Do NOT handle the pump with wet hands or
when standing in water or on a damp surface. The pump is designed to be
used in closed and covered pools only. Water accumulated on the pool cover
can cause injury or death. Proper installation of the pool cover pump and
periodic maintenance is recommended. Failure to follow COULD result in
serious injury or death.

Technical Support and E-Warranty Certificate
www.vevor.com/support