VEVOR PAS-30AC User manual

Support and E-Warranty Certificate https://www.vevor.com/support
PORTABLE UTILITY PUMP
USR MANUAL
Applicable model: PAS-30AC
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

1
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
Portable
Utility Pump

2
USAGE GUIDE
NOTE: This Water Pump has been designed to operate on 110-120
Volt, 60Hz exclusively.
Using any other voltage or Hz adversely affects performance.
IMPORTANT: Keep this guide for future reference.
CAUTION:Be sure to review SAFETY INSTRUCTIONS FIRST
PERTAINING TO A RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY
TO PERSONS before using the pump.
TOOLS AND MATERIALS YOU MAY NEED
•Standard hose for the outlet. A small hose is provided for the inlet.
•PTFE tape. Sometimes this is referred to as 'plumber's tape.'

3
PACKAGE CONTENTS
SITE PREPARATION CLEANING AND MAINTENANCE
Make sure your work area where you intend to use the pump is clear of
clutter and well-lit. Also, ensure that the pump is in a location where it will
not be submerged or in contact with external water.
The pump is designed to pump fresh water, so please make sure that the
water source does not contain large bits of debris.
IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS. SAVE THESE INSTRUCTIONS.
WARNING - When using electrical pumps, basic precautions should
always be followed, including the following:
1.Read all instructions before using the pump.
2.To reduce the risk of injury, close supervision is recommended at all
times that the pump is in operation.
3.Do not put your fingers or hands into a water pump inlet our outlet when
operating.
4.Unplug the power before attempting to move the pump.
5.For proper grounding instructions, see the ELECTRICAL CONNECTION
portion of this manual.
Item
Quantity
Portable Utility Pump
1
Impeller
1
Carbon Brush
1
Suction Attachment
1
6 ft Inlet Pipe
1
Instruction Manual
1

4
WATER AND ELECTRICAL CONNECTIONS
HOSE CONNECTIONS
Connect a standard garden hose to both the inlet and outlet of the pump.
If using another hose than
the provided short hose for the inlet connect, then ensure that
the supplied inlet hose is less than
25' long and less than 10' above the water source.
Note: Keep the hoses as straight as possible, which will improve the
pump's efficiency.
GROUNDING INSTRUCTIONS
THE WATER PUMP IS EQUIPPED WITH A GROUNDED PLUG-IN
POWER CORD. This pump must be grounded. In the event of a
malfunction or breakdown, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock. This pump is
equipped with a cord having an equipment grounding conductor and a
grounding plug. The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and
ordinances.
ELECTRICAL CONNECTIONS
A.Connect the pump to 120 Volt, 60 Hz AC only.
B.Use a three-prong plug. See the figure below:

5
3-Prong Plug and Outlet
CAUTION: Do not allow the pump, electrical cord, or electrical outlet to
come into contact with water.
This may result in serious injury. If unsure how to install or use this pump,
consult a licensed electrician.
OPERATING INSTRUCTIONS
PUMP PREPARATION
Before operating, the pump needs to be oiled. Pour 1/2 tablespoon of
food-grade vegetable oil into the inlet of the pump. This should provide the
necessary lubrication to the impeller.
OPERATION
The following are the steps for the operation
1.After oiling the pump, make sure the inlet and outlet hoses are firmly
attached.
2.Verify that the pump is placed in a safe area and will not be submerged
or come in contact with a water source.
3.Check that the inlet hose is submerged and connected to a water source.
4.Make sure the end of the outlet hose is connected correctly.
5.Carefully plug the pump into a 3-wire, 120 Volt, 60 Hz, grounded A.C.
Outlet to begin operation.
6.The pump is self-priming, and water should begin to flow for 30 seconds

6
or less.
a.If water does not flow, unplug the pump and check the connection and
setup.
b.Operating the pump without water for an extended period may damage
the pump and cause it to fail.
7.Once pumping has been completed, unplug the pump. The pump may
become hot during operation. Be careful we working near or touching the
pump.
CAUTION: Water and electricity do not mix. Make sure continuously check
that the power connections and cables are not in contact with water.
Consult an electrician if you have any questions or concerns about the
electrical circuit or pump operations.
TROUBLESHOOTING
Problem
Possible Causes
Possible Solutions
Pump will not start
1. No power or cord not
connected
1. Check outlet power
or plug in the pump
Pump is on, but no
water is flowing
1.Pump not oiled
2.Inlet hose is too long
3.Hoses kinked
1.Oil pump through the
inlet
2.Shorten the inlet hose
3.Straighten out the
hoses
Pump stops with a
warning
1.No water to pump
2.Pump has
overheated, and
thermal overload has
tripped
3.Hoses have become
kinked
1.Check the inlet water
supply
2.Unplug and let the
pump cool
3.Straighten out hoses
Pump leaks
1.Hose O-rings missing
1.Remove inlet and
outlet hoses and
reinstall

7
SPECIFICATIONS
Voltage/Frequency: Single Phase 120V-60Hz.
Current: 2.3A
Power: 1/10 HP.
Maximum Flow: 360GPH.
Maximum Head Lift: 46 ft.
Inlet/Outlet Diameter: GHT3/4.
18AWG power cord, 6' long.
REFERENCE PARTS LIST

8
List of Explosion Plans
Number
Item
Quantity
1
pan head screws
4
2
end cover
1
3
seal washer
1
4
impeller
1
5
pan head screws
2
6
easy-carry handle
1
7
pump head
1
8
oil seal
1
9
wool felt
1
10
check ring
1
11
rubber ring
1
12
electric machinery
1
13
cable and plug
1
14
brush cap
2
15
brush spring
2
16
brush
2
17
foot pad
4
18
bottom seat
1
19
foot pad
4
20
pan head screws
2
21
serrated gasket
2
22
baseboard
1
23
suction attachment
1
24
water pipe
6 ft

9
*There are any minor changes to the numbers included in the user manual
without prior notice.
Manufacturer: Ningbo Rising Mechanical & Electric Co., Ltd.
Add.: No.16 Huapu Road, QiJiashan, Beilun Zone, Ningbo City, Zhejiang,
315800, P.R. China.

Support and E-Warranty Certificate https://www.vevor.com/support