VIDEOMAN Futuro 7.1 M User manual

VIDEOMAN is a registered trade mark of EOS Australia Pty Ltd
Designed, imported and distributed by Videoman Systems Co.
-7.1 -7.1M
Wide Screen Intercom Kit Kit Monitor only
( Inc. FUTURO-7.1M, FUTURO-7.1C, FUTURO-7PS ) ( Inc. FUTURO-7.1M, FUTURO-7PS )
200308.01

Fix a weather hood

Write a name on the tag

www.videoman.com.au
Description of Door Station FUTURO-7.1C features
Fig.8
1. CCD Camera
2. White LEDs for night vision
3. Speaker
4. Name Plate
5. CALL Button
6. Microphone
7. Cable terminals to monitor
A (Audio), G(Ground), B(DC10V),
V(Video) to Monitor
DO1 & DO2 : Voltage-free Normally Open
Door open contact
WARNING! The following variable registers
should be adjusted by qualified technicians
ONLY.
8. Speaker volume on the Door Station
9. Microphone sensitivity on the Door Station
Descriptions of Power supply FUTURO-7PS
Fig.9
16VDC 1.0A Power supply
( + ) : White Broken Line : + DC 16V
( – ) : Black wire : Ground
Descriptions of Multi Door Switcher FUTURO-7.1SW -Optional Extra
D2
B
V
D1
X G
B
V
A
X
G
B
V
A
X
+
--
A
G
Monitor
Door #2
Door #1
Fig.10
Refer to Fig.13 on Page 6 or Fig.14 on Page7
Monitor terminal group
A, G, B, V : Connect to Monitor(s)
X : Reserved for special applications
Door #1 terminal group
A, G, B, V : Connect to Door Station #1
X : Reserved for special applications
Door #2 terminal group
A, G, B, V : Connect to Door Station #2
X : Reserved for special applications
Pag4
7
9
8
DO1 DO2
D1 : Connect to CA on monitor(s)
D2 : Reserved for special applications
applications.
+,-: Reserved power terminal for
specical

IMPORTANT!! Please read page 9 & 10 for cable requirements BEFORE running cables
System connection with one camera and one monitor
To Door Station
Power Supply for
Door Strike
To 240V AC Main
16V 1.0A
Electric Door Strike
FUTURO-7.1C
FUTURO-7.1M
Set to 75 Ω
on the last monitor
Power Supply
FUTURO-7PS
To 240V AC Main
Fig.11
System connection with one camera and two monitors
Monitor #1
FUTURO-7.1M
Monitor #2
FUTURO-7.1M
Electric Door Strike
FUTURO-7.1C
16V 1.0A
Power Supply
FUTURO-7PS
To 240V AC Main
16V 1.0A
Power Supply
FUTURO-7PS
To 240V AC Main
To 240V AC Main Power Supply for
Door Strike
Fig.12
Page5
CA
CA
CA
1
2
3
4
5
6
7
8
9
10
D01
D02
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
D01
D02
B
B

IMPORTANT!! Please read page 9 & 10 for cable requirements BEFORE running cables www.videoman.com.au
System connection with two Door Stations and two Monitors
Power Supply for
Door Strike
Monitor #1
FUTURO-7.1M
Monitor #2
FUTURO-7.1M
Electric Door Strike #1
Door #1
FUTURO-7.1C
Electric Door Strike #2
Door #2
FUTURO-7.1C
16V 1.0A
Power Supply
FUTURO-7PS
To 240V AC Main
16V 1.0A
Power Supply
FUTURO-7PS
To 240V AC Main
FUTURO-7.1SW
Fig.13
Page6
1
2
3
4
5
6
7
8
9
10
CA
D01
D02
1
2
3
4
5
6
7
8
9
10
D01
D02
CA
B
B

IMPORTANT!! Please read page 9 & 10 for cable requirements BEFORE running cables
System connection with two Door Stations and one Monitor
Power Supply for
Door Strike
Monitor #1
FUTURO-7.1M
Electric Door Strike #1
Door #1
FUTURO-7.1C
Electric Door Strike #2
Door #2
FUTURO-7.1C
16V 1.0A
Power Supply
FUTURO-7PS
To 240V AC Main
FUTURO-7.1SW
Fig.14
Video distributor GL-D4L-PLUS for multiple monitors
When more than two monitors are installed in a system, it is highly recommended to use a video amplifier GL-D4L-PLUS
for better image.
1
P
J
In order to employ the output (Out)
of the video distributor,remove the
jumper terminal( JP1 ) on the PCB
to V on Monitor #4
to V on Monitor #3
to V on Monitor #2
to V on Monitor #1
Video IN
From V on Door Station
G(Ground) wires
from Door Station & Monitors
MUST connect to
this GND terminals.
GL-D4L-PLUS (Optional Extra)
(+) (-)
CTin Gnd CTout
SE-12VDC05Adpt (Optional Extra)
+ -
D1 D2 In Out D3 D4
75 Ω
8
When GL-D4L-PLUS is used,
the termination DIP switches shall set to
75ohm on all monitors.
Fig.15
Page7
1
2
3
4
5
6
7
8
9
10
CA
D01
D02
D01
D02

www.videoman.com.au
1/2
Intercom
ON
Page8
DOOR OPEN
Basic Operation
When a caller presses the call button on the outdoor station, a Ding-Dong sounds on the monitor and the
video screen lights up for 30 seconds. If you are satisfied with the identity of the caller, press the “On”
button to speak.
The screen will automatically turn off after 60 seconds.
To turn the screen back on, press the “On” button once, then you can see the visitors again and continue
to talk with caller.
Monitoring doors through Monitor / Switching to Door#2
Press the “On” button on monitor, the Audio and Video function will activate.
When system is connected with 2 door stations (Door#1, Door#2) the Door#1 will display by default.
“1/2” button allows you to switch from Door#1 to Door#2 by pressing and hold it.
To turn it off, press again or wait for 60 seconds.
Monitor adjustment
If desired, the ring volume and brightness may be adjusted.
Adjust volume at the right hand side of the monitor.
Door Strike operation
When electric door striker and additional power supply for it is in the system, it can be operated from
monitor. While monitoring or talking, press “Open Door” button to open the electric door striker. When more
than one door stations are in a system, it opens a door striker which is being monitored.
Operation for Intercommunication / Baby Monitoring between Monitors
When system is connected with multiple monitors, internal intercommunication and Audio Baby Monitoring
is available between monitors.
An Intercom calling can be started by any indoor monitor. Press the “Intercom” button, this will ring all other
monitors in a system and activate Audio communications between monitors without any further action.
The audio channel will remain active until pressing “Intercom” button again to turn off the function. During
Internal Communication/Audio Baby Monitoring, Intercom LED on monitors will light in Purple.
Call
Fig.16
(This function is only available from master monitor)

Cable requirement - STAR Wiring method
FUTURO-7.1M
MONITOR
4core
Screened
Fig8
FUTURO-7.1C
CAMERA
Fig8
Fig8
Power Supply
FUTURO-7PS
Power Supply
for door latch
Junction room
4core
Screened
An additional power supply and
Fig8 Cable is required for door
strike operation (Indicated as
broken lines on the diagrams)
Fig8 Fig8
Fig8
Fig8
FUTURO-7.1M
MONITOR
FUTURO-7.1C
CAMERA
FUTURO-7.1 M
MONITOR
Power Supply
FUTURO-7PS
Power Supply
for door latch
Junction room
4core
Screened
5core
Screened
5core
Screened
Cable requirement
Based on the distance from a camera to
the furthest monitor,
< 20M : CAT5 cable
A (Audio)
G (GND)
V (Video)
G (GND)
B (12VDC)
B (12VDC)
double up
DO 1
DO 2
(door open)
Orange
W/Orange
Green
W/Green
Blue
W/Blue
Brown
W/Brown
Fig8
Fig8
Fig8
Fail-Secure
Door Strike
FUTURO-7.1C
CAMERA Fig8 Fig8
FUTURO-7.1M
MONITOR
FUTURO-7.1M
MONITOR
Power Supply
for door latch
Power Supply
FUTURO-7PS
Multi Camera Switcher
FUTURO-7.1SW
Fig8
Junction room
4core
Screened
6core
Screened
6core
Screened
CAT5 wire configuration
< 50M :
14/020 (0.44mm
2
) shielded cable
(connect shield to G)
AND
RG-59/U for video signal
(connect core to V & shield to G)
< 100M :
NOTE
Fig 8 : 2Core 24/020 ( = 2Core 0.75mm
2 )
Junction room
24/020 (0.44mm
2
) shielded cable
(connect shield to G)
AND
RG-59/U for video signal
(connect core to V & shield to G)
> 100M :Contact your supplier
Page9
Fig.18
Fig.19
Fig.20
:Electrical switch room, junction room
or ceiling where all wires are joined.

Cable requirement - Daisy Chain (loop-in-loop-out) wiring method www.videoman.com.au
4core
Fig8
Power Supply
FUTURO-7PS
Fig8
Fail-Secure
Door Strike
FUTURO-7.1C
CAMERA
Fig8 4core
Power Supply
for door latch
Junction room
Fig8
Fig8
FUTURO-7.1M
MONITOR
FUTURO-7.1C
CAMERA
FUTURO-7.1M
MONITOR
Power Supply
FUTURO-7PS
Power Supply
for door latch
Fig8 Fig8
Junction room
5core
Screened
4core
Screened
Fig8
Fig8
Fail-Secure
Door Strike
FUTURO-7.1C
CAMERA
Fig8 Fig8
FUTURO-7.1M
MONITOR
FUTURO-7.1M
MONITOR
Power Supply
for door latch Power Supply
FUTURO-7PS
Multi Camera Switcher
FUTURO-7.1SW
Fig8
Fail-Secure
Door Strike
Fig8
Junction room
6core
Screened
4core
Screened
5core
Screened
5core
Screened
NOTE :
Fig 8 : 2Core 24/020 ( = 2Core of 0.75mm
2 )
Junction room : electrical switch room, junction room, ceiling
MEMO
Page10
Fig.21
Fig.22
Fig.23
FUTURO-7.1M
MONITOR

MAINTENANCE
1. All components should be protected from violent vibration, impacting, knocking and dropping.
2. If necessary, clean the lens and screen with dampen soft cotton cloth do not use chemical cleaning agent.
3. Image distortion may occur if the monitor is installed near microwave ovens, TVs, computers, DC/AC adaptors or any other electro
magnetic field generating appliances.
4. Keep all monitors and cameras away from high temperature, dust, caustic and oxidation gas.
5. Use only with the FUTURO-7PS power supply which is supplied by the authorised VIDEOMAN supplier.
6. Pay attention to the high voltage inside the products. Please ensure this unit is only serviced by qualified professionals.
TECHNICAL SPECIFICATIONS
1. Talk auto-off time: 60 seconds
2. Surveillance auto-off time: 30 seconds
3. Power supply for indoor monitor : 16V DC 1.0Amp
4. Power for Door Station: 10V DC (Supplied by indoor monitor)
5. Power consumption: Standby 2W, Max. 14W
6. Monitor screen: 7” Colour TFT LCD, 1024(H) x 234(V)
7. Camera Lens: 3.6mm, 51 degree horizontal 41 degree vertical visual angle
8. Image sensor : 1/4” CCD, 270k Pixels
9. Resolution: >380 TV lines
10. Video signal: 1Vp-p, 75Ω , CCIR standard
11. Connection mode: 4 wire, polarity conscious
12. Door strike operation : Voltage-free Relay output from the Door Station
13. Door strike operation time : controlled by Door open button on Monitor
14. S/N Ratio : Video 50dB, Audio 40dB
WARRANTY STATEMENT
This equipment is warranted to be free from defects in material and workmanship for a period of twelve months from the date of purchase as indicated on
the proof of purchase and/or by serial number on the product.
Defective units returned by the purchaser at his own expense during this period will be repaired (or replaced at the option of the distributor) with an
equivalent piece of refurbished and tested equipment. The repaired or replaced equipment is then warranted for the balance of the initial warranty period
or for thirty (30) days, whichever is longer.
The repair or replacement will be without charge provided that the equipment has not been subjected to electrical of physical misuse or to unauthorised
repair or modification.
The foregoing warranty is in lieu of all other warranties, express or implied, including, but not limited to, merchantability or fitness for a particular purpose.
The purchaser's exclusive remedy with respect to any and all losses or damages resulting from any cause whatsoever, shall be repair or replacement as
specified above.
Distributor shall in no event be liable for any consequential or incidental damages, however occasioned, whether by negligence or otherwise. No suit or
action shall be brought against manufacturer more than one year after the accrual of the cause of action therefore. No agent, employee or representative
of the distributor nor any other person is authorised to modify this warranty in any respect. This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
www.videoman.com.au