ViewSonic VPC2-O Series User manual

VPC2-O Series
Slot in PC module
Quick Start Guide
Model No. VS18603/VS18604/VS18605/VS18602
P/N: VPC2C-W33-O1/VPC25-W33-O1/VPC25-W53-O1/VPC25-W53-O2/VPC27-W53-O1/VPC27-W55-O2

2
Thank you for choosing ViewSonic®
As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding
the world’s expectations for technological evolution, innovation, and simplicity.
At ViewSonic®, we believe that our products have the potential to make a positive
impact in the world, and we are confident that the ViewSonic® product you have
chosen will serve you well.
Once again, thank you for choosing ViewSonic®!

3
1. Interface
109 3
1 4 5 6 8732
Item Descripon
1TYPE-C
2RESET
3USB 2.0 x 2
4USB 3.2
5LAN
6HDMI
7DP
8LINE-OUT
9HDD/POWER_LED
10 POWER BUTTON

4
2. Installaon
2-1
2-2

5
2-3

6
3. InternetConnecon

7
4. InputSelecon
4242
To select an Input Source:
1. Press INPUT on the remote control, press the seng buon
4242
on the front
panel, or press the
4242
seng icon from the toolbar to display the Input Sengs
menu.
2. Press
4242
/
4242
/
4242
/
4242
to select PC.
3. Press
4242
on the remote control, or touch the input source.
4. Press
4242
on the remote control, or touch a blank area outside of the menu to
exit.

8
5. USBConnecon

9
6. Specicaons
Processor Intel® Comet Lake-S
PCH H510 Q570
Graphic Integrated Intel® UHD graphic
RAM 2 x DDR4 SO-DIMM, 32GB (Max)
Storage 1 x NVMe M.2 2280 PCIe SSD
IO ports 1 x USB Type-C
(USB 3.2 Gen1, Data Only)
2 x USB 2.0,
1 x USB 3.2 Gen1
1 x USB Type-C
(USB 3.2 Gen2, Data Only)
2 x USB 2.0,
1 x USB 3.2 Gen2
1 x DP 1.4 out
1 x HDMI 2.0 out
1 x RJ45 Ethernet (with Intel® I219-LM)
1 x Audio jack
2 x External antenna Holes
1 x Power On/O Buon
1 x Reset Buon
1 x Power LED
1 x HDD LED
1 x 80 Pin JAE OPS connector
WIFI/BT 1 x M.2 2230 (with Intel® AX201 WiFi 6 + BT 5.2 module)
Watchdog Support
vPro/AMT No Yes
BIOS AMI UEFI BIOS
Power DC in +12V~+19V @ 4.74A
60 W (Typical)
Operang
Condions
-5 °C to +45 °C
20% RH ~ 80% RH non-condensing
Storage
Condions
-20 °C to +80 °C
10% ~ 80% R.H. non-condensing

10
RegulatoryandServiceInformaon
ComplianceInformaon
This secon addresses all connected requirements and statements regarding
regulaons. Conrmed corresponding applicaons shall refer to nameplate labels
and relevant markings on the unit.
FCC Compliance Statement
This device complies with part 15 of FCC Rules. Operaon is subject to the following
two condions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operaon.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protecon against harmful interference in a residenal
installaon. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instrucons, may cause
harmful interference to radio communicaons. However, there is no guarantee that
interference will not occur in a parcular installaon. If this equipment does cause
harmful interference to radio or television recepon, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cauoned that changes or modicaons not expressly approved
by the party responsible for compliance could void your authority to operate the
equipment.
Industry Canada Statement
CAN ICES-003 (B)/NMB-003(B)
Contains FCC ID: PD9AX201NG
IC ID: 1000M-AX201NG