Viking DCWH3042SS User manual

VENTILATION
Built-In Classic Chimney Wall Hood
Standard, w/Ledge, & Ledgeless
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
All models include
o Stainless Steel/Chrome (CR)—Stainless
steel rail with chrome supports/brackets
an hooks (inclu e ).
o Brass Rail Option (BR)—nameplate, rail,
supports/brackets, an hooks
(inclu e ). Brass components have a
urable protective coating for
maintenance-free normal use.
FINISH DETAILS
• Stainless Steel (SS), Black (BK), White
(WH), Metallic Silver (MS), Graphite Gray
(GG), Stone Gray (SG), Taupe (TP), Biscuit
(BT), Cotton White (CW), Oyster Gray
(OG), Gol en Mist (GM), Lemona e (LE),
Sage (SA), Mint Julep (MJ), Sea Glass (SE),
Iri escent Blue (IB), Viking Blue (VB),
Pumpkin (PM), Racing Re (RR), Apple
Re (AR), Burgun y (BU), Plum (PL),
Chocolate (CH), an Cobalt Blue (CB).
• Accessory Rail Option*—Front of hoo .
(Must be or ere factory installe . Rail not
available on le ge & le geless mo els.)
DCWH Designer
Chimney Wall Hood*
DCWL Designer
Chimney Wall Hood
w/Ledge*
Standard Features & Accessories
DCWN Designer
Chimney Ledgeless
Wall Hood*
Model Options
*Shown throughout with adjustable duct cover, included.
ORDERING INSTRUCTIONS
First specify mo el number, followe by color co e (DCWH3042SS). If or ering optional ecorative rail, specify co e at en
(DCWH3042SSCR).
• A justable uct cover (for 8 – 9’
ceilings) is stan ar
• Must also purchase interior, exterior or
in-line ventilator kit, sol separately
(see Installation Notes & Accessories
for recommen e Viking ventilator
pro ucts)
• Heat sensor turns the ventilator on full
power when cooking temperatures
reach uncomfortable levels
• Variable spee controls for custom
venting—separate on/off switch allows
you to leave ventilator at favorite/most-
use setting
• 12-hour timer built into ventilator
controls
• Delay feature allows you to set the
ventilator to shut off on its own from
10 to 30 minutes later
• 24”D. (tests show 24”D. hoo s perform
properly over 27”D. ranges)
• Heavy- uty construction; sleek,
contemporary esign an styling
o Virtually seamless stainless steel
esign with no visible screws
• Easy cleanup
o Dishwasher-safe, stainless steel mesh
filters efficiently remove grease an
heate vapors from the air, an are
easily remove for quick cleaning
(frame an mesh are stainless steel)
•See Dimensions & Specifications
table for number of filters per mo el
o Design of low-profile filter system
means less interior hoo space to be
cleane
o Canopy interior is completely line in
stainless steel for increase rigi ity,
seamless appearance, an easy cleaning
• 50-watt halogen lights with immer
control
• Power switch an immer control are
separate, allowing you to leave immer
at favorite position
o See Dimensions & Specifications
table for number of lights per mo el
Model numbers
CLASSIC CHIMNEY WALL HOODS
• DCWH3042—30”W./12”H.
• DCWH3644—36”W./14”H.
• DCWH4244—42”W./14”H.
• DCWH4844—48”W./14”H.
CLASSIC CHIMNEY WALL HOODS WITH
LEDGE
• DCWL3342—33”W./12”H.
• DCWL3944—39”W./14”H.
• DCWL4544—45”W./14”H.
• DCWL5144—51”W./14”H.
CLASSIC CHIMNEY WALL HOODS,
LEDGELESS
• DCWN3042—30"W./12"H.
• DCWN3644—36"W./14"H.
• DCWN4244—42"W./14"H.
DCWN4844—48"W./14"H.
R E V I S E D 5 / 2 / 1 1
© 2 0 1 1 V R C — INFORMATION SUBJECT TO CHANGE

VENTILATION
Built-In Classic Chimney Wall Hood Standard
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
✪
Please see
Installation Notes &
Accessories for
important information,
including ventilator
kits, duct covers,
backsplashes, and
warming shelf
panels.
Dimensions & Specifications
PRODUCT DIMENSIONS
24”
(61.0 cm)
A
C
12”
(30.5 cm)
2 ”
(5.1 cm)
B
D
DCWH Designer
Chimney Wall Hood
CHIMNEY WALL HOOD
Model Hood Duct Cover Lights Filters Heat Approx.
Width (A) Height (B) Width (C) Depth Height (D) Lamps Ship. wt.
DCWH3042 29-7/8” (75.9 cm) 12” (30.5 cm) 10” (25.4 cm) 12” (30.5 cm) 18” (45.7 cm)— 22N/A 51 lbs.
30” (76.2 cm) (23.1 k )
DCWH3644 35-7/8” (91.1 cm) 14” (35.6 cm) 12” (30.5 cm) 12” (30.5 cm) 16” (40.6 cm)— 22N/A 61 lbs.
28” (71.1 cm) (27.7 k )
DCWH4244 41-7/8” (106.4 cm) 14” (35.6 cm) 12” (30.5 cm) 12” (30.5 cm) 16” (40.6 cm)— 23N/A 71 lbs.
28” (71.1 cm) (32.2 k )
DCWH4844 47-7/8” (121.6 cm) 14” (35.6 cm) 18” (45.7 cm) 12” (30.5 cm) 16” (40.6 cm)— 33N/A 82 lbs.
28” (71.1 cm) (37.2 k )
R E V I S E D 5 / 2 / 1 1
© 2 0 1 1 V R C — INFORMATION SUBJECT TO CHANGE

VENTILATION
Built-In Classic Chimney Wall Hood
w/Ledge, & Ledgeless
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
✪
Please see
Installation Notes &
Accessories for
important information,
including ventilator
kits, duct covers,
backsplashes, and
warming shelf
panels.
Dimensions & Specifications
PRODUCT DIMENSIONS
24”
(61.0 cm)
A
C
12”
(30.5 cm)
B
D
CHIMNEY WALL
HOOD LEDGELESS
A
C
12”
(30.5 cm)
B
D
25-1/2”
(64.8 cm)
2”
(5.1 cm)
CHIMNEY WALL
HOOD LEDGE
DCWL Designer
Chimney Wall Hood
w/Ledge
DCWN Designer
Chimney Ledgeless
Wall Hood
Model Hood Duct Cover Lights Filters Heat Approx.
Width (A) Height (B) Width (C) Depth Height (D) Lamps Ship. wt.
DCWL3342 32-7/8” (83.5 cm) 12” (30.5 cm) 10” (25.4 cm) 12” (30.5 cm) 18” (45.7 cm)— 22N/A 54 lbs.
30” (76.2 cm) (24.5 k )
DCWL3944 38-7/8” (98.4 cm) 14” (35.5 cm) 12” (30.5 cm) 12” (30.5 cm) 16” (40.6 cm)— 22N/A 64 lbs.
28” (71.1 cm) (29.0 k )
DCWL4544 44-7/8” (114.0 cm) 14” (35.5 cm) 12” (30.5 cm) 12” (30.5 cm) 16” (40.6 cm)— 23N/A 74 lbs.
28” (71.1 cm) (33.6 k )
DCWL5144 50-7/8” (129.2 cm) 14” (35.5 cm) 18” (45.7 cm) 12” (30.5 cm) 16” (40.6 cm)— 33N/A 85 lbs.
28” (71.1 cm) (38.6 k )
DCWN3042 29-7/8” (75.9 cm) 12” (30.5 cm) 10” (25.4 cm) 12” (30.5 cm) 18” (45.7 cm)— 22N/A 51 lbs.
30” (76.2 cm) (23.1 k )
DCWN3644 35-7/8” (91.1 cm) 14” (35.5 cm) 12” (30.5 cm) 12” (30.5 cm) 16” (40.6 cm)— 22N/A 61 lbs.
28” (71.1 cm) (27.7 k )
DCWN4244 41-7/8” (106.4 cm) 14” (35.5 cm) 12” (30.5 cm) 12” (30.5 cm) 16” (40.6 cm)— 23N/A 71 lbs.
28” (71.1 cm) (32.2 k )
DCWN4844 47-7/8” (121.6 cm) 14” (35.5 cm) 18” (45.7 cm) 12” (30.5 cm) 16” (40.6 cm)— 33N/A 82 lbs.
28” (71.1 cm) (37.2 k )
R E V I S E D 5 / 2 / 1 1
© 2 0 1 1 V R C — INFORMATION SUBJECT TO CHANGE

VENTILATION
Built-In Classic Chimney Wall Hood
Standard, w/Ledge, & Ledgeless
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
30”min.
(76.2cm)
to
36”max.
(91.4cm)
66”min.
(167.6cm)
to
72”max.
(182.9cm)
36”
(91.4cm)
30”min.
(76.2cm)
to
36”max.
(91.4cm)
66”min.
(167.6 cm)
to
72”max.
(182.9 cm)
36”
(91.4cm)
Dimensions & Specifications
CLEARANCE DIMENSIONS
CHIMNEY WALL HOOD
CHIMNEY WALL HOOD
LEDGE/LEDGELESS
Note: Fo best pe fo mance and safe, efficient ope ation,
it is ecommended that the bottom of the hood be 30”
(76.2 cm) to 33” (83.8 cm) above the counte top.
R E V I S E D 5 / 2 / 1 1
© 2 0 1 1 V R C — INFORMATION SUBJECT TO CHANGE

DCWH Designer
Chimney Wall Hood
DCWL Designer
Chimney Wall Hood
w/Ledge
DCWN Designer
Chimney Ledgeless
Wall Hood
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
Proper installation/ducting is extremely
important to ensure maximum
performance. Use a qualified and
trained installer.
VENTILATION
• Check with a qualifie an
traine installer or local co es
for makeup air requirements, if
any.
• Max. uct run
o For 300 – 1,200 CFM—50’
(15.2 m)
o For 1,500 CFM—75’ (22.9 m)
o Duct run length is for general
reference only; always use a
qualifie an traine installer.
o Straight runs an gra ual
turns are best; for example,
each 90” elbow is equivalent
to 5’ – 10’ (1.52 – 3.05 cm) of
straight run.
• 7’ roun uct for 300 – 600
CFM; 10’ for 900 – 1500 CFM
o Never use flexible uct; it
creates back pressure/air
turbulence an greatly
re uces performance.
GAS
Not applicable
ELECTRICAL
• Har wire irect with two-wire
with groun
• 120 VAC/60 Hz
• Max. amp usage (rating
inclu es rec. ventilator kit
rating)
PLUMBING
Not applicable
* A 1,200 CFM interior- or exterior-power ventilator shoul be use when installe over range/rangetop with gas char-grill.
** It is recommen e that the 1,500 CFM ventilator be use with longer uct runs.
Note: Maximum amp ating fo hoods includes ecommended ventilato kit ating. All p oducts must be ha d wi ed with two-wi e g ound. An inte io - o
exte io -powe ventilato kit must be pu chased fo installation with all 18”H. hoods.
VENTILATION
Built-In Classic Chimney Wall Hood
Standard, w/Ledge, & Ledgeless
Installation Requirements
Model Ventilator kits Duct size Max. amps
Interior Exterior Interior Exterior Interior Exterior
DCWH3042 DIV300/DIV440 DEV900/DEV1200 7” (17.8 cm) 10” (25.4 cm) 1.7/3.2 6.6/3.9
DIL900/1200
DCWH3644 DIV300/DIV600* DEV900/DEV1200* 7” (17.8 cm) 10” (25.4 cm) 1.7/3.9 6.6/3.9
DIL900/1200
DCWH4244 DIV600 DEV900/DEV1200* 7” (17.8 cm) 10” (25.4 cm) 3.9 6.6/3.9
DIL900/1200
DCWH4844 DIV1200* DEV1200/DEV1500** 10” (25.4 cm) 10” (25.4 cm) 7.3 4.3/5.1
DIL1200
DCWL3342 DIV300/DIV440 DEV900/DEV1200 7” (17.8 cm) 10” (25.4 cm) 1.7/3.2 6.6/3.9
DIL900/1200
DCWL3944 DIV300/DIV600* DEV900/DEV1200* 7” (17.8 cm) 10” (25.4 cm) 1.7/3.9 6.6/3.9
DIL900/1200
DCWL4544 DIV600 DEV900/DEV1200* 7” (17.8 cm) 10” (25.4 cm) 3.9 6.6/3.9
DIL900/1200
DCWL5144 DIV1200 DEV1200/DEV1500** 10” (25.4 cm) 10” (25.4 cm) 7.3 4.3/5.1
DIL1200
DCWN3042 DIV300/DIV440 DEV900/DEV1200 7” (17.8 cm) 10” (25.4 cm) 1.7/3.2 6.6/3.9
DIL900/1200
DCWN3644 DIV300/DIV600* DEV900/DEV1200* 7” (17.8 cm) 10” (25.4 cm) 1.7/3.9 6.6/3.9
DIL900/1200
DCWN4244 DIV600 DEV900/DEV1200* 7” (17.8 cm) 10” (25.4 cm) 3.9 6.6/3.9
DIL900/1200
DCWN4844 DIV1200* DEV1200/DEV1500** 10” (25.4 cm) 10” (25.4 cm) 7.3 4.3/5.1
DIL1200
Note: All CFMs a e based on tests with 0.1 static p essu e. Without applying static p essu e (some b ands do not), CFM could be g eatly
ove stated.
UTILITY REQUIREMENTS
R E V I S E D 5 / 2 / 1 1
© 2 0 1 1 V R C — INFORMATION SUBJECT TO CHANGE