Vimar 21553.1 User manual

Multimedia video touch screen
User instructions

1
DISCLAIMER
Use of this device by any user, consumer or professional presupposes conscious acknowledgement and full
acceptance of this Disclaimer.
It remains understood that use of the device is to be considered as acceptance of the contents of this Disclaimer,
it nevertheless being understood that VIMAR shall at any time be able to completely or partially change and/or
update this device, or the conditions of its use.
1. Ownership of the device, content rights, limitations and prohibitions on use, Copyright.
The copyright on the device is owned by VIMAR S.p.A. Viale Vicenza 14, Marostica (VI).
The trademarks and distinctive marks published on the device are the property of VIMAR S.p.A. , or of third
parties and, in any case, access to the device does not give the right to use such trademarks and distinctive
marks without the written authorization of their respective owners.
Any registered trademark, service mark, collective mark, design right, image right, privacy right or similar
rights, mentioned or used in the device, are the property of their legitimate owners.
All the material available through this device is protected by the rights of intellectual property, in conformity
with the current regulations on the protection of the applicable copyright.
Access to the device does not provide any right to take possession of it, nor copy, change, distribute or
re-publish any part of the information it contains in any form or with any instrument, without the express
written authorization of VIMAR S.p.A. and / or of the third party owner of the relevant rights for its use and/
or reproduction.
2. Exemption from responsibility.
VIMAR S.p.A.:
•shall not be held responsible for consequences that may be caused to Users or third parties by possible
malfunctioning of the device and for any damage of any nature that Users may meet with, including any
failures, malfunctioning, breaks in the availability or operation of the device and/or its functions;
• by way of example and not peremptorily VIMAR S.p.A. shall moreover not be held responsible for any
loss of earnings caused by using the information contained in the device, loss of data or work stoppages
deriving directly or indirectly from use of the device;
The user acknowledges VIMAR S.p.A. the right to stop the supply at any moment, whether temporarily or
definitively, completely or partially, of some applications equipping the device owned by third parties (Web
Radio), relieving it from all responsibility.
VIMAR shall not be held responsible for the lawfulness, truthfulness or exactness or accuracy of the informa-
tion provided by the applications equipping the device and owned by third parties.
The above limitations /exclusions of responsibility do not have the purpose of limiting / excluding the
responsibility of the Company in cases in which it cannot be excluded or limited in accordance with the
applicable national law.

2
3. Privacy.
For whatever is not contemplated, any treatment and/or filing (unless in an "aggregate" form and for "statisti-
cal purposes") of the data passing through the software platform, VIMAR S.p.A. with the application of every
precaution as required by Italian Legislative Decree D.lgs no. 196/2003 will receive and receives express
authorization to treat it in any way, within the limits of that which is strictly necessary for the purposes of
performing the described services.
The software platform collects some service information from the device that is necessary for providing the
services concerning the registered devices, the version of the application and of the services it provides, as
well as signals for checking correct access and operation of said services. The above information is all neces-
sary and functional in order to enable correctly performing the functions of remote control of the applications
and devices supported by the platform.
It is therefore necessary to grant specific approval and authorization for each above-mentioned treatment,
within the limits of that which is strictly necessary for providing the associated service.

3
Table of Contents
1. Description ………………………………………………………………………………………………………… 5
1.1 Main characteristics …………………………………………………………………………………………… 5
2. Main menu ………………………………………………………………………………………………………… 6
2.1 Notices ………………………………………………………………………………………………………… 7
2.2 Context menu…………………………………………………………………………………………………… 8
3. Settings……………………………………………………………………………………………………………… 10
3.1 General ………………………………………………………………………………………………………… 10
3.2 Vimar Web Server IP network ………………………………………………………………………………… 15
3.3 Video door entry system ……………………………………………………………………………………… 15
3.4 User management ……………………………………………………………………………………………… 18
3.5 Updating ………………………………………………………………………………………………………… 23
4. Using files from removable media ……………………………………………………………………………… 24
5. Home automation system ……………………………………………………………………………………… 24
6. Video door entry unit ……………………………………………………………………………………………… 25
6.1 Video door entry unit with no active calls …………………………………………………………………… 25
6.2 Video door entry unit with call in progress …………………………………………………………………… 26
6.3 VOIP …………………………………………………………………………………………………………… 29
7. Video cameras …………………………………………………………………………………………………… 31
7.1 Viewing the video camera list ………………………………………………………………………………… 31
7.2 Cyclical viewing of video cameras …………………………………………………………………………… 32
8. Blackboard ………………………………………………………………………………………………………… 34
9. Photo/Video ………………………………………………………………………………………………………… 38
10. Web Radio ………………………………………………………………………………………………………… 39
11. Music ……………………………………………………………………………………………………………… 41
12. Weather …………………………………………………………………………………………………………… 43
13. Feed Reader ……………………………………………………………………………………………………… 46
14. Calcolatrice ……………………………………………………………………………………………………… 48
15. Calendar …………………………………………………………………………………………………………… 49
16. Cleaning the multimedia video touch screen ……………………………………………………………… 49
17. Compliance with regulations…………………………………………………………………………………… 49

4

5
1. DESCRIPTION
In a By-me automation system in which the web server is installed, the multimedia video touch screen enables
complete control of lights, roller shutters, HVAC, speaker system, scenarios, event programs, load control, power
consumption management (Energy Guard) and intrusion detection alarm system. The multimedia video touch
screen can moreover be used as a video door entry unit and it manages all the functions of the Due Fili (Two Wire)
video door entry system (displays images from panel and from video cameras, voice communication with speech
unit, audio door entry units and call buttons, opening electrical lock, etc.). The device also lets you access certain
information over the Internet via dedicated applications (weather forecasts, news, RSS feed readers, web radio),
view video or photographs, listen to music (mp3 files), write notes and link them to an acoustic alarm signal (date
and time) and create text or graphic notes with real drawings thanks to the "blackboard" function.
1.1 Main characteristics.
Description
Display
CBA A: SDHC port
B: ON/OFF button
C: USB port
ON/OFF button:
• ON: with the device switched off, press once to turn on the video touch screen.
• With the device switched on, press once to display the context menu.
• OFF: with the device switched on, press and hold for approximately 8 s until the video touch screen displays
the off icon.
Video backlighting lifetime: 10,000 hours (at 25°C)
The lifetime is defined as the estimated time for the brightness to fall to 50% of the initial value.

6
Main Menu
2. MAIN MENU
To display all the other icons, scroll horizontally with your finger over the area covering them.

7
Main Menu
2.1 Notices.
In case of special settings or events (for example video door entry call, alarm silencing, etc.) the multimedia video
touch screen will display the following warnings:
- : User away or advanced video door entry answering machine function activated
- : Ringtone off
- : "Door open" indicator
- : SD card not inserted
- : SD card inserted 51-75%
- : SD card inserted 76-100%
- : Indicator for "lost call" (video door entry system) and "new note" (blackboard)
At the bottom of the touch screen multimedia video device are three RGB LEDs which light up to provide a further
indication of missed calls and new notes written on the blackboard.
Depending on the notification, the message will be as follows:
- 1 red flash every 5 s for a call recorded on the answering machine;
- 1 yellow flash every 5 s for a new note added to the blackboard.
The LEDs remain off if there are no notifications.

8
2.2 Context menu
When accessing each of the menus contained in the main one, it is possible to view a context menu used to carry
out some quick operations for managing the multimedia video touch screen.
The context menu is displayed by pressing the ON/OFF button once (button Billustrated one page 5).
More specifically:
- Tapping displays the Main menu sending the current application, when applicable, to the back.
- Touching displays the options relating to the current menu (tool bars, etc.).
- Tapping takes you back and closes the current application.
- Touching closes the context menu
- Touching the cursor of the scroll bar (moving it to the left or right) increases/decreases the volume of the audio
outputs (the level is highlighted by the illumination of the bar).
Main Menu

9
Main Menu
As illustrated on page 4, from the main menu you access all the management menus of the multimedia video touch
screen relating both to its own functions and to those of the home automation system to monitor.
The following chapters describe all the main screens of these menus; note that on touching the
icon you always go back to view the main menu.

10
3. SETTINGS
From the main menu, touching the icon takes you to the Settings menu.
3.1 General.
Touching the icon displays the following options:
- System info;
- Date and Time;
- Language and Unit of Measurement;
- Energy Saving.
Settings

11
Settings
• System info
Touching the icon displays the software release and the main features of the multimedia video
touch screen.
• Date and Time
By touching the icon it is possible to adjust the time and date displayed.
By touching the relevant icons it will be possible to select Automatic or Manual mode, viewing the time in AM/PM
or 24h mode, the time zone and set the current date.

12
Automatic:
Manual:
Settings

13
Settings
• Language and Unit of Measurement
By touching the icon it is possible to select the language in which all the words will be
displayed and the unit of measurement with which the multimedia video touch screen will display the temperature
of the various system environments.
Touch the drop-down menu on "Language" and select the desired one.
Touch the icon corresponding to the unit of measurement for the temperature in °C or °F; the set unit of measure-
ment will then be used in the Weather application.

14
Settings
• Energy Saving
Touching the icon takes you to the screen for setting the notifications, screen saver and
brightness settings for the multimedia video touch screen.
By tapping the dedicated icons you can activate switching off the display and the screen saver, setting its type
and its time out.
- enables selecting a picture folder on the SD card;
- enables selecting a video on the SD card;
- enables viewing the current day, date and time.
The drop-down menu is used to set the time-out at the end of which the screen saver will be started.
The drop-down menu alongside the "monitor switch-off timer" icon is used to set the time-out at the end
of which the display will switch off.
The screen also has two controls for adjusting the brightness of the display during normal use and in screen saver
status.

15
Settings
3.2 Vimar Web Server IP network
This menu is used to carry out all the operations of configuring the IP network and the Vimar Web Server. These
operations are solely for the installer.
3.3 Video door entry system.
This menu is used to carry out all the configuration operations of the multimedia video touch screen for managing
the video door entry system. These operations are solely for the installer.
The user can set different ringtones according to the type of call so as to identify it based on the associated
acoustic signal.
Touching the icon and subsequently the icon brings up the screen that enables setting
the ringtone to associate with the types of call.
Touching the icon on the ringtone to set, opens a menu with a list of available ringtones.

16
Touching:
- takes you to the audio folder that may be on the SD card or on the USB stick to link mp3 files
to each type of call;
- stops the selection;
- confirms the settings made.
To adjust the volume of all the ringtones, touch the cursor of the scroll bar and move it to the left or to the right
according to the desired level (this level is highlighted by the illumination of the bar).
Settings

17
Settings
Video door entry system answering machine.
This option is used to define the timeout after which the unanswered call is considered "missed" and the caller's video,
recorded in the first 10 seconds after pressing the doorbell, is saved. At the same time the notification is displayed in the
Main menu and, if enabled, the LED notification is also activated when there are one or more missed calls.
• In the main window touch the icon and then the icon.
Set the answer time by entering a value in the shown range.
Saving missed calls is managed as follows:
- If the device has an SD card with free space, the calls are saved in sequence with a numerical limit set only by
the available space on the SD Card (consider that every missed call occupies approximately 5 MB of memory);
- If no SD card is inserted in the device, only the last missed call will always be saved in the local memory and will
overwrite the previous one.
• Advanced video door entry system answering machine
The setup screen of the video door entry answering machine also features controls for recording a voice message to be
played when an external call is received. This function is called the "Advanced video door entry answering machine".
The caller can thus listen to this message after ringing the bell and in her turn leave a video message with sound
for a maximum duration of 20 s.
The "Advanced video door entry answering machine" function is active when the audio door entry answering
machine is switched on (ON) and in the main menu of the “Video door entry unit” application the “User away”
status has been set.
N.B. Since the advanced video door entry answering machine entails the caller recording a video mes-
sage, it is necessary to fulfil the obligations in compliance with the current privacy and installation regula-
tions in the countries where the product is installed.

18
3.4 User Management.
This menu is used to make the settings that enable differentiating the use of the multimedia video touch screen
according to the type of user.
Touching the icon brings up the screen that enables creating different types of user with which
different privileges are associated.
Creating users and assigning privileges can be done only by the Administrator.
Touching the icon brings up the screen that enables creating new users and editing ones already config-
ured.
Before displaying the screen for user management, the multimedia video touch screen requests authentication by
the administrator by entering name and password.
The default passwords, namely the ones to use when first switching on (that will then be subsequently able to be
changed), are the following:
- Administrator password: admin
- Installer password: inst
When creating a new user, the password that by default is assigned to this user is the name of the user.
For example: a user called Mario is created; the password assigned by default will be Mario.
Touching the icon confirms the entered password.
Settings

19
Settings
Touching:
- changes the settings for already configured users;
- deletes the selected user;
- adds a new user.
Touching the icon displays the Settings menu.
Touching the icon displays the screen that enables managing the three types of user:
- Administrator;
- Installer;
- User.
The table shown on the page alongside illustrates the three types of user and the functions associated with
them; in the phase of creating users then, it will suffice to link to each one of these the privileges that you want
to assign.