Vinotemp Element EL-BWC108-SS-L User manual

OWNER’S MANUAL
A PROUD HERITAGE OF EXPERIENCE & QUALITY
EL-BWC108-SS-L
STAINLESS STEEL
WINE & BEVERAGE COOLER
732 South Racetrack Road, Henderson, NV 89015 | 1.800.777.8466 | [email protected] | www.vinotemp.com

YOUR WINE COOLER
This unit can be used for storage and/or service. The unit has a glass door and soft interior
light that you can use to display your wine.
SERVING WINES
Storing wines at the proper temperature is important. To preserve them as long as possible
wine should be stored at approximately 55° Fahrenheit. However, the chart below suggests
the optimal drinking temperature for the different styles of wine.
SERVING BEVERAGES
Storing beverages at the proper temperature is important. To preserve them as long as
possible beverages should be stored at approximately 39° Fahrenheit. However, the chart
below suggests the optimal drinking temperature for the different styles of beverages.
°C
°F
Wine Style
°C
°F
Beverage Style
19
66
Armagnac, Brandy, Cognac
12
53
Water
18
64
Full Bodied Red Wines, Shiraz
10
50
Black Ale
17
62
Tawny Port
8
46
Juice
15
59
Medium Bodied Red Wines
7
45
Sour Beers
14
57
Amontillado Sherry
7
45
Pale Ale
13
55
Light Bodied Red Wines
7
45
Dark Lagers
12
54
Full Bodied White Wines
6
43
Iced Coffee
11
52
Medium Bodied White Wines
5
42
Premium Lagers
10
50
Rosé, Light Bodied White Wines
4
40
Wheat Beers
9
48
Vintage Sparkling
3
38
Light, Pale Lagers
8
46
Fino Sherry
3
38
Coca-Cola
7
45
Non Vintage Sparkling
2
35
Dairy
2

GENERAL OPERATING INSTRUCTIONS
Remove all external and internal packaging from your appliance. Be sure that all parts have been
included before discarding any packaging materials. You may want to keep the box and packing
materials for use at a later date.
Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged. Contact
our customer service at 1-800-777-8466 or [email protected].
Let the unit rest UNPLUGGED for 24 hours once you have it placed in your home.
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
-Save these instructions-
To register your product, visit:
http://www.vinotemp.com
Register your warranty within 10 days of receiving the unit.
Please be sure to retain your proof of purchase.
Protect Your Investment with an Extended Warranty!
Add a New Leaf extended warranty to your order, and have the security of knowing that if there should be a problem, even
years in the future, New Leaf will be there to assist! Usable for any Wine Cellar or other electronic device manufactured
by Vinotemp. Add this warranty to purchases made from vinotemp.com or other qualified venders. Warranty must be
registered within the first 10 days from original purchase.
Visit www.vinotemp.com to purchase.
3

TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ..................................................................... 5
ELECTRICAL CONNECTION ...................................................................................... 6
PARTS AND SPECIFICATIONS ................................................................................. 7
INSTALLATION ......................................................................................................... 8-9
OPERATING YOUR WINE COOLER ................................................................... 10-11
STORING WINE AND BEVERAGES ......................................................................... 11
RACKING CONFIGURATION .................................................................................... 12
CARE AND MAINTENANCE ................................................................................. 13
TROUBLESHOOTING ............................................................................................... 14
TERMS OF SALE AND WARRANTY ........................................................................ 15
SERVICE & IMPORTANT NOTICE ........................................................................... 24
4

IMPORTANT SAFETY INSTRUCTIONS
• Do not operate this or any other appliance with a damaged cord.
• Do not operate if housing is removed or damaged.
• Exercise caution and use reasonable supervision when appliance is used near children. Never allow children to
operate, play with or crawl inside the appliance. Keep packing materials away from children.
• Before performing any maintenance or cleaning, ensure that the unit is unplugged or that the power line is
disconnected.
• Do not clean appliance with flammable fluids. Do not store or use gasoline or other flammable vapors and
liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
• Exercise caution when moving and installing the unit. The cooler is heavy and may require two or more people
when moving the unit to prevent strain or injury.
• To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed. Choose a
well-ventilated area with temperatures above 60 °F and below 90 °F.
• Locate the unit away from direct sunlight and sources of heat (stove, heater, radiator, etc.). This unit is intended
for indoor use only and must be installed in an area protected from the elements.
• Place the appliance on a solid, level surface.
• Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this
manual. All other servicing should be referred to a qualified technician.
• Connect to properly polarized outlets only. It is recommended that a separate circuit, serving only your appliance
be provided. Use receptacles that cannot be turned off by a switch or pull chain. Be sure that the plug is fully
inserted into the receptacle.
• If the appliance is going to be used in an area that is prone to power surges/outages, it is suggested that you use a
power surge protector. The surge protector that you select must have a surge block high enough to protect the
appliance it is connected to. Damages due to power surges are not considered a manufacturer covered defect and
will void your product warranty.
• To protect against electric shock, do not immerse appliance, plug or cord in water or other liquids. Avoid locating
the unit in moist areas.
• This appliance is designed to be built-in (fully-recessed) or freestanding.
• Do not use this appliance for other than its intended purpose. For indoor, household use only.
• Do not operate the unit with wet hands, while standing on a wet surface or while standing in water.
• Do not use solvent-based cleaning agents or abrasives on the interior of the cooler. These cleaners may
damage or discolor the interior.
• Keep fingers out of pinch point areas and be careful when closing doors if children are around.
• This appliance is designed for storing and cooling wines. Do not store perishable food or medical products within
the unit.
• When disposing of refrigerated appliances, special handling is often required. It is the consumer’s responsibility
to comply with federal and local regulations when disposing of this product.
• Do not slide your wine cooler into place.
• WARNING: Risk of child entrapment and suffocation. Before you throw away this or an old unit, take off the
door. Leave the shelves in place, so that children may not easily climb inside.
DANGER – RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIGERANT USED. TO BE REPAIRED ONLY
BY TRAINED SERVICE PERSONNEL. DO NOT PUNCTURE REFRIGERANT TUBING.
5

ELECTRICAL CONNECTION
For your protection, this unit is equipped with a 3-conductor cord set that has a molded 3-prong
grounding-type plug, and should be used in combination with a properly connected grounding-
type outlet.
• Do not under any circumstances cut or remove the third ground prong from the power cord
supplied. For personal safety, this appliance must be properly grounded.
• Do not kink or pinch the power supply cord of appliance.
• The cord should be secured behind the unit and not left exposed or dangling to prevent
accidental injury.
• A standard electrical supply (115V AC only, 60Hz, 15A), properly grounded in accordance
with the National Electrical Code and local codes and ordinances, is required.
• Never unplug the unit by pulling the power cord. To disconnect the appliance, always grip the
plug firmly and pull straight out from the wall outlet. When moving the unit, be careful not to
damage the power cord.
• The unit should always be plugged into its own individual electrical outlet with a voltage rating
that matches the rating label on the unit.
Extension Cord
CAUTION: It is strongly recommended that you do not use an
adapter or an extension cord with this unit.
6

PARTS AND SPECIFICATIONS
1. Control Panel
2. Glass Door Handle
3. Door Hinge
4. Storage Shelf
5. Glass Door
6. 54L Drawer Handle
7. 54L Drawer Door
8. 45L Drawer Handle
9. 45L Drawer Door
10. Adjustable Feet
11. Kickplate
*Note: This wine & beverage cooler is designed to store approximately 100+ standard Bordeaux 750 ml bottles and 100 beverage cans.
Storing large and/or oddly shaped bottles (including champagne and sparkling wine bottles) will decrease the capacity of your cooler.
Model
EL-BWC108-SS-L
Voltage
115V
Frequency
60Hz
Control Temp Range (2 Zones)
Upper: 5-22°C (41-72°F)
Lower: 1-8°C (34-46°F)
Refrigerant
R600a/1.83Oz
Input Power
160W
Power Consumption
0.65 kWh/24h
Volume
510L (18.0 cu.ft.)
Net Weight
272lbs (123.4 kg)
Gross Weight
309lbs (140.2 kg)
Dimensions (W x D x H)
23 3/4 x 28 5/8 x 77 in.
Packaged Dimensions (W x D x H)
26 3/8 x 30 3/4 x 83 3/8 in.
7

INSTALLATION
§ Remove all packing material before using your wine cooler.
§ IMPORTANT : Before connecting the unit to a power source, let it stand upright for approximately 24 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
§ Clean the interior surface with
lukewarm water and a soft cloth.
§ This unit is designed for freestanding
and built in installation and indoor use only.
Position the unit in a dry and well-ventilated
place. Avoid placing the wine cooler near
any source of heat or moisture, or in direct
sunlight. Do NOT install the unit in a
location with an ambient temperature that
will fall below 60°F.
§ For built-in installation, leave a 1/4”
(6.35mm) space on each side and at
the top of the wine cooler to ensure
proper air circulation to cool the compressor
and condenser. Also, be sure to not
obstruct the front exhaust vent with any
objects as this may affect the unit from
performing properly.
§ For freestanding installation, leave
3.15” (8cm) of space at the back, 2” (5cm)
of space on each side, and unlimited
clearance at the top of the wine cooler are
suggested to ensure proper air circulation to
cool the compressor and condenser. Do not
place underneath a table, counter top, or
anything of the sort as this will not allow for
proper air circulation.
§ Do not slide the unit into place. When
moving your wine cellar, please do not
incline it more than 45 degrees.
§ Place the wine cooler on a flat, level surface strong enough to support it when it is fully loaded. To level the
appliance, adjust the front leveling legs at the bottom of the unit.
§ For best performance it is recommended that you install the appliance in a location with an ambient
temperature range between 64-78°F (18-26°C). If the ambient temperature is above or below recommended
temperatures, the performance of the unit may be affected.
§ It is recommended that you do not install the appliance near an oven, radiator or other heating source. Direct
sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Don’t install in a
location where the temperature will fall below 60°F (16°C). For best performance, do not install the appliance
behind a cabinet door or block the base grille.
§ Avoid locating the unit in moist areas.
§ Plug the beverage cooler into an exclusive, properly installed-grounded wall outlet.
§ After plugging the appliance into a wall outlet, please allow the unit to cool down for 3 to 4 hours before placing wine
bottles or beverage cans inside.
8
77 in (1956mm) 77 1/4 in (1962mm)
23 7/8 in (606mm)
24 3/8 in (619mm)
***Add 1/4” (6.35mm) on both sides and at the top,
plus 1” (25mm) in the back for built-in installation
26 7/8 in (683mm)
28 5/8 in (727mm)
29 5/8 in (752mm)

ANCHORING TO THE WALL
1. On the back of the appliance, attach brackets in the same zones shown using adhesive straps. Mark and
drill pilot holes for the screws about 8mm into the appliance. Then use a screwdriver to tighten the screws
all the way into the appliance.
2. Position the appliance in the desired location. Locate wall studs behind the appliance and mark the
location where the bracket on the back of the appliance lines up with a stud. Move the appliance away
from the wall and position bracket on the mark. Mark and drill pilot holes into the center of the stud with a
3/32” drill bit. Attach a bracket to the stud with the long screws provided.
3. Move the appliance into its final position, taking care to line up the wall bracket close enough to the
bracket on the back of the appliance to strap them together. Thread a strap through the brackets as
shown in the illustration. Tighten the straps until snug. Do not over-tighten.
CAUTION: This product is not intended to be a substitute for proper supervision. Manufacturer assumes no
liability for improper installation or excessive loads placed on screws, brackets, or straps.
Straps should be periodically adjusted, tested, and replaced.
9

INSTALLING THE HANDLE
This wine cooler includes a stainless handle that is not required to operate this unit. To install the handle please
follow the below instructions:
① Pull away the door gasket in the area where the handle is to be
installed. You can see two designated holes for handle installation.
The gasket is easily displaced by hand, no tools are necessary.
② Install the handle tightly as shown below with the two screws,
lock washers and flat washers provided. (DO NOT over tighten as
this will cause damage to the handle assembly and stainless steel
surface of the glass door).
③ Replace the door gasket to its original position.
OPERATING YOUR WINE COOLER
The controls of your wine cooler
The wine cellar should be placed in an area where the ambient temperature range is between 18-26 degrees.
If the ambient temperature is above or below this range, the performance of the unit may be affected. For
example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate.
Upper Zone: 5-22°C (41°F - 72°F), Lower Drawer: 1-8°C (34°F - 46°F)
10
0