Vintage view CC-LOCKER User manual

Case & Crate
Locker Door (CC-LOCKER) Installation Instructions
The Locker Door turns any Case & Crate Bin conguration into a secure Locker (locks sold separately).
Video guides, spec sheets, and additional support are available at vintageview.com/caseandcrate.
• Locker Door
• Door Latch
• (4) Metal screws
Parts List
Instructions
Step 1: Select Door Direction
The Locker Door can close to either side of the Bin unit.
Pick which works best for you. The Door Latch (Step 2)
will install to the side of the unit in which you want the
door to close.
Step 2: Attach the Door Latch
Attach the Door Latch to the side of the wall in which you
selected for the door to close. Using the provided metal
screw, attach to the center pre-drilled hole.
Step 3: Attach the Door
Install the Locker Door to the opposite side of the wall
by screwing the provided metal screws into the three
pre-drilled holes.

Instructions
Step 4: Finish
Repeat until all Bins have been transformed to Lockers! Add wine.
Pro Tip: If the Locker doors do not close properly, start by adjusting the levelers at the base unit to en-
sure the Bin is properly leveled. Also check to ensure the bottom shelf of the unit has been installed with
its mounting tabs facing up.
Additional Locker Doors available at vintageview.com/caseandcrate
.