
W Series Frame Elbow
Installation Instructions for FCF-ELBOW
• (2) FCF-ELBOW
• (4) Self drilling metal screws
• Phillips head screwdriver or drill
bit
• Level
• 1x1 Tube Steel (“Drop”)
• Choice of Hidden Base Plates
(FCF-HIDDEN) or Standard Base
Plate (FCF-BASE)
• Wall Series racking and frame
Included Required
C U T TO FIT
OR
(2) 12" 1X1 PIECES
FIGURE A
1. Build the Frame: Assemble the Wall Series
Wine Rack Frame (not included) per its included instruc-
tions.
2. Cut 1x1 Steel Tube to Fit: Using leftover
1x1 tube steel from cutting your Wall Series Frame —
also known as “drop” — cut the appropriate length
required for installation back to wall. FIGURE A If you
don’t have enough, or any drop, from your Wall Series
Frame, please contact VintageView to order 12” sec-
tions of matching 1x1 tube steel.
PRO TIP: When measuring from the wall to the front of
a Wall Series Frame, subtract 1 1/8” to get proper 1x1
measurement. If measuring from back of frame, subtract
1/8” for accurate measurement.
3. Insert the Elbow: Insert the Elbow into the con-
structed Frame system. Secure to the frame with the provided
self-drilling screw. FIGURE B
FIGURE B
FIGURE C