Vipro MVR-606-2IP User manual

MVR-606-2IP 6ch Mobile DVR
Quick Guide
7KLVPDQXDOZDVFRPSOHWHDQGFRUUHFWDWWKHWLPHRISULQWLQJ7KHRQJRLQJGHYHORSPHQWRIWKHSURGXFWVPD\
PHDQWKDWWKHFRQWHQWRIWKHXVHUJXLGHFDQFKDQJHZLWKRXWQRWLFH
7KHPDQXDOZLOOEHNHSWXSGDWLQJSHULRGLFDOO\DQGVRIWZDUHUHIHUUHGDVZHOO
© 2015 ViPRO Corporation

ViPRO Corporation
Quick Guide
MVR-606-2IP l v1.1 l 2015.Q1
Mobile DVR MVR-606-2IP
NOTICE
2
NOTICE
The information in this manual was current when published. The contents of this manual are subject to change without
prior notice and will be updated accompanying with the release of new version.
The purpose of this manual is to kindly aid the user for the operation for our MDVR (especially for GUI setting). The user
should have a basic understanding of computer operation and basic knowledge of how to connect peripherals and make
some settings.
Guarantee & Warnings
1) Electrical Apparatus Safety
All installation and operation should comply with local electrical safety norms.
2) Transportation
In the process of transportation, storage and installation, please avoid heavy stress, violent vibration, impact and
water splashing.
3) Installation
Install the equipment in accordance with the requirements, handle carefully. Do not heavily press the equipment
before the MDVR installation is finished.
4) Requirements on Engineers & Technicians
All the work of checking and maintenance should be done by qualified engineers. We do not undertake any problems
caused by unauthorized modifications.
5) Requirements on Environment
The equipment should be installed and stored in a cool and dry place, away from direct sunlight, flammable or
explosive substances, etc. Keep gaps not less than 3cm around the device to facilitate ventilation for cooling.
6) Accessories
Make sure to use accessories from the manufacturer suggested in the attachment.
Insulate circuit ground and metal shell for all the peripherals.
Before installation, please open the package and ensure that all parts are included.
If there are any problems, please contact us as soon as possible.

ViPRO Corporation
Quick Guide
MVR-606-2IP l v1.1 l 2015.Q1
Mobile DVR MVR-606-2IP
PRODUCT OVERVIEW
3
1. PRODUCT CHARACTERISTICS
1.1. OVERVIEW
MVR-606-2IP is a functional Mobile Digital Video Recorder specially designed for vehicle video
surveillance and remote monitoring. It has a high-speed processor and embedded operating system,
combining with the most advanced H.264 video compression / decompression technology, 3G/4G network,
GPS positioning technology, as well as WIFI. It supports not only video recording in 720P, WD1, WHD1,
WCIF, D1, HD1 and CIF formats, but also vehicle travel information recording and wireless data upload. With
center software it also achieves alarm linkage central monitoring, remote management and playback analysis.
It is easy to use with simple design, multi-functions, superior anti-vibration, flexible installation and high
reliability.
1.2. SPECIFICATIONS
Item
Technical Index
Product series
MVR-606-2IP
Function Overview
Preview, Recording, Playback, Network, Locating
System
OS
Linux 3.0.8
Control Mode
CP4, Easy Check, network, mouse
Video
Input
4 channels WD1+2 channels 720P
Output
1 channel
Total Resource
(4 x 25)FPS WD1 @ PAL / (4 x 30)FPS WD1 @ NTSC +
(2 x 30)FPS 720P
Video Signal Standard
Electrical level: 1Vpp Impedance : 75Ω NTSC/PAL Optional
Audio
Input
6 channels (Including IPC x 2)
Output
1channel
Audio Signal Standard
Electrical level: 2Vpp Input impedance: 4.7kΩ
Display
Display Split
1/4/9
OSD
GPS information, alarm, vehicle No., speed, date/time
Operation Interface
Semi-transparent GUI
Recording
Video/Audio Compression
Video: H..264
Audio: ADPCM, G.711A G.711U
Image Resolution
Analog:
PAL:WD1(928X576), WHD1(928X288),
WCIF(464X288),
D1(704X576), HD1(704x288), CIF(352x288);
NTSC:WD1(928X480), WHD1(928X240), WCIF(464X240),
D1(704x480), HD1(704x240), CIF(352x240);
Digital:
720P(1280X720);

ViPRO Corporation
Quick Guide
MVR-606-2IP l v1.1 l 2015.Q1
Image Quality
1-8 levels adjustable (1 is the best)
Recording Mode
Boot up/Manual/Schedule/Alarm (sensor trigger, speed,
acceleration, video loss, temperature)
Pre-recording
0-60minutes
Post-recording
0-30 minutes
Mirror/Dual Recording
Support
Playback
Playback Channel
1 channel by local playback
Search Mode
Date/time, channel, event
Network
Ethernet
RJ45(10/100M) x1
IPC Ethernet
6-pin DJ M12(10/100M x 2, PON power supply)
WIFI
802.11b/g/n
3G/4G
EVDO/WCDMA/TDD-LTE/FDD-LTE
Locating
GPS
Location tracking, speed detection and time sync
Storage
Hard Disk
2.5" SATA hard disk x 1(Up to 2 TB)
Interface
USB
USB2.0 x 2
SD
SD x 1
SIM
SIM x 1
RS232
RS232 x 2
RS485
RS485 x 2
Sensor
8 inputs, 2 outputs
Serial
G-sensor (Internal)
Speed
1 channel pulse speed detection
Interface
Interface (CP4 Optional)
Power
Input
DC8-36V
Output
12V@1A, 5V@1A
Max Power Consumption
69.9W
Standby Power Consumption
≈0W
Others
Water Proof Rate
IP54
Physical
Characteristic
Dimension (L x W x H)
255.3mmx150mmx89.1mm / 10.05“x 5.906“x 3.508“
Weight
2.2Kg / 4.85lbs
Environment
Operating Temperature
-40
濎- +70濎/ -40ʲ- +158ʲ(With heater) or
-10
濎
- +70濎/ 14
ʲ
- +158
ʲ
Operating Relative Humidity
8%-90%
˄
No Condense
˅

ViPRO Corporation
Quick Guide
MVR-606-2IP l v1.1 l 2015.Q1
Mobile DVR MVR-606-2IP
SYSTEM DIAGRAM
5
1.3. SYSTEM DIAGRAM
1.4. EXTERNAL INTERFACE
DIMENSION (Unit: mm)

ViPRO Corporation
Quick Guide
MVR-606-2IP l v1.1 l 2015.Q1
Mobile DVR MVR-606-2IP
EXTERNAL INTERFACE
6
FRONT PANEL
REAR PANEL
Serial No.
Print
Description
1
Power
DC 8
-36 V Power Input
2
Sensor&Serial
The
Interfaces of Serial Port and Switch
3
A/V IN1~4
Audio
& Video Input 1-4
4
A/V OUT
Audio & Video Output
5
IPC
The Interface of PON Power Supply
6
GPS Antenna
Interface
7
3G/4G/WIFI
Antenna
I
nterface

ViPRO Corporation
Quick Guide
MVR-606-2IP l v1.1 l 2015.Q1
Mobile DVR MVR-606-2IP
HDD INSTALLATION
7
1.5. HARD DISK INSTALLATION

ViPRO Corporation
Quick Guide
MVR-606-2IP l v1.1 l 2015.Q1
Mobile DVR MVR-606-2IP
ALARM CABLE DEFINITION
8
1.6. DEFINITION AND PICTURES OF EXTERNAL CABLES
ALARM CABLE DEFINITION
SERIAL PORT DEFINITION

ViPRO Corporation
Quick Guide
MVR-606-2IP l v1.1 l 2015.Q1
Mobile DVR MVR-606-2IP
FAQ
9
2. FREQUENTLY ASKED QUESTIONS
1) The system can’t start?
Usually this problem results from the incorrect power connection. Please follow below steps to check the power
connection:
1. Check the input power, whether the power wire is connected correctly, whether the ground wire is connected back to
the battery, and whether the fuse on the power wire is in good condition.
2. Check whether the ACC signal wire input to the power is with voltage higher than 7 V.
3. Check whether the device key is closed.
2) The MDVR restarts uninterruptedly?
Please follow below steps to check it:
1. Check whether the voltage of MDVR is insufficient. If the voltage is less than the start-up voltage of the device, the
device would always restart.
2. The problem in hard disk/SD card may cause the failure to start. Take off the storage part and check whether it is
broken down.
3) The device can’t record?
Usually this problem results from the storage disk or camera. Please follow below steps to check it:
1. Check whether the storage disk is installed, whether it is in good contact, and whether the disk can be read normally
in computer.
2. Check whether the storage disk is formatted. The storage disk should be formatted before normally storing record
files.
3. Check whether there is video signal input into the device from camera, and whether there is video/image on the
screen.
4) There is no voice in record file?
Please follow below steps to check it:
1. Check whether there is an external pickup, or whether the camera features with the function of audio collection.
2. Access to Video Channel Settings, check if Audio is set on.
3. There must be video input into the channel for recording and it must record normally.
5) The GPS works abnormally?
Please follow below steps to check it:
1. Check whether the GPS antenna is installed correctly. There is a silk print logo on the GPS antenna holder behind
the host device.
2. Check whether the antenna receiver is sheltered. It should not be covered by any stuff, which may cause it not to
receive signals.
3. Environmental influence such as tree shades, being inside tunnel, driving near tall building or elevated roads,
thunderstorms or other weather influence, etc. can also cause signal loss or receiving wrong signals.
6) The device can’t shutdown in ignition switch mode?
Please follow below steps to check it:
1. Check if the ACC line connection mode is correct; and check whether there is voltage on ACC yellow line when the
key is turned off.
2. If the device has been set with schedule recording, it can’t shutdown if it is still during recording time of the task table.

Installation Manual of ViPRO Mobile DVR - MVR series │ver. 1.1

- 1 -
ViPRO Mobile DVR –All MVR series
Installation Manual v1.1
7KLVPDQXDOZDVFRPSOHWHDQGFRUUHFWDWWKHWLPHRISULQWLQJ7KHRQJRLQJGHYHORSPHQWRIWKHSURGXFWV
PD\PHDQWKDWWKHFRQWHQWRIWKHXVHUJXLGHFDQFKDQJHZLWKRXWQRWLFH
7KHPDQXDOZLOOEHNHSWXSGDWLQJSHULRGLFDOO\DQGVRIWZDUHUHIHUUHGDVZHOO
© 2014 ViPRO Corporation

Installation Manual of ViPRO Mobile DVR - MVR series │ver. 1.1

- 2 -
Table of Content
NOTICE....................................................................................................................... ............................................. 3
Installation General Instruction .................................................................................................................................. 4
Part 1 MDVR Device Installation.................................................................................................................................. 5
1 Pre-Installation Preparation ..................................................................................................................................... 5
1.1 Technical Requirement............................................................................................................................. 5
1.2 Installer and Supervisor Qualification......................................................................................................... 5
1.3 Pre-installation Investigation and Installation Plan Making........................................................................... 5
1.4 Reference Installation Tool....................................................................................................................... 6
2 MDVR Device Installations ..................................................................................................................................... 7
2.1 The Hard Disk Installation ........................................................................................................................ 8
2.2 Power Connection.................................................................................................................................... 8
2.2.1 Power Wire Requirement................................................................................................................. 8
2.2.2 The Power Connection..................................................................................................................... 8
2.3 MDVR Device installation....................................................................................................... ................... 9
2.4 How to Choose and Install Cameras......................................................................................................... 11
2.5 Antenna (GPS/WIFI/3G) Connection ....................................................................................................... 14
2.6 Monitor Installation................................................................................................................................ 15
2.7 How to connect the I/O Sensors ............................................................................................................. 16
2.8 How to Connect Alarm System................................................................................................................. 17
2.9 How to Deal with the Connection for Cables and Wire .............................................................................. 19
Part 2 The Whole System Testing after Installation .................................................................................................... 19
1 MDVR Device Testing............................................................................................................................................ 20
1.1 Inspection before Power Connection ....................................................................................................... 20
1.2 Trial Testing after the System Gets the Power .......................................................................................... 20
1.3 Accessories Testing................................................................................................................................ 21
1.4 MDVR Recording and Network Testing .................................................................................................... 21
1.4.1 MDVR Recording Testing ............................................................................................................... 21
1.4.2 I/O Sensor Testing........................................................................................................................ 22
1.4.3 Vehicle Speed and Pulse Testing.................................................................................................... 22
1.4.4 Wireless Network Testing............................................................................................................... 23
1.4.5 Software Upgrade ......................................................................................................................... 24
1.4.6 Setup Machine Registration Information.......................................................................................... 25
1.4.7 Storage Format (HDD or SD Card).................................................................................................. 25
Appendix ................................................................................................................................................................ 26
Bus Application.................................................................................................................................................... 26
The Table for Bandwidth and Frame Rate. ............................................................................................................ 27

Installation Manual of ViPRO Mobile DVR - MVR series │ver. 1.1

- 3 -
NOTICE
Before you install the MDVR system in the vehicle, please be familiar with this system and read this manual carefully.
Meanwhile the whole installation process must be guided by the professional persons.
1. MDVR is electronic recording and storage system which must be delivered very carefully.
2. Use only a regular 12-volt DC or 24-volt DC (3 ~ 5 Amps) certified power supply for installation in vehicles. The
MDVR can support wide power range from 8v ~36v DC. Please follow the installation and operating instructions
provided to ensure a steady and reliable installation. Handle all electric equipments and connections properly to avoid
injuries.
3. Even though the recorder unit may not be turned on, live power exists in the mounting assembly and precautions
should be taken to avoid shock or short circuit.
4. The MDVR installation and maintenance should be implemented by the person who is trained professionally.
5. Choose the right place to install the recorder unit. The space must be big enough for ventilation. No any other
subjects around are allowed.
6. Install the MDVR in a dry location shielded from direct contact with excessive humidity and moisture, rain or other
sources of liquid spills. Do not install on a recessed surface where liquids may accumulate or under surfaces where
liquids may drip.
7. Do not handle the MDVR with wet hands, while standing in water, or while in contact with other sources of water or
moisture that could create a shock hazard.
8. Install the MDVR out of direct sunlight and away from direct sources of heat, dust, vibration and high magnetic field
9. MDVR and accessories installation must be insulated with vehicle to avoid loop interference
10. Do not attach any external device (not recommended) to the recorder unit without specified or approved by Vendor.
11. Attach the MDVR ground cable to the vehicle correctly to complete the power circuit.
12. Do not mount the unit to a surface subject to excessive vibration.
13. Do not take out or change any module when the MDVR is power on.
14. Power supply must connect to the vehicle battery positive and negative polarity directly or UPS from vehicle. Any
other indirect power connection is forbidden. In order to make sure the device and vehicle work fine, please add a
fuse into the connection for protection.
15. Please do maintenance routine for MDVR and accessories to avoid any screw loose or bad video image.

Installation Manual of ViPRO Mobile DVR - MVR series │ver. 1.1

- 4 -
Installation General Instruction
Before install the recorder system and accessories, the most important is to know the vehicle construction
especially for power. Please check following:
1) Which MDVR model and accessories will be installed?
2) In which part of the vehicle can install the MDVR? How big the size is?
3) Cables and installation tools (for example: electric drill, screw driver, screws, multimeters etc…)
4) Manpower distribution
5) General concept for wiring
6) Draft the specific installation guide for specific vehicle
Rough Installation Steps as below:
Step 1: Preparation
Step 2: Installing Point Test
Step 3: Installing
Step 4: Testing
Step 5: Inspection
Step 6: Finish the installation
Step 7: Maintenance

Installation Manual of ViPRO Mobile DVR - MVR series │ver. 1.1

- 5 -
Part 1 MDVR Device Installation
1. Pre-Installation Preparation
1.1 Technical Requirement
Be familiar with the MDVR device functions and application
Be familiar with the whole MDVR solution
Be familiar with the vehicle electrical circuit, vehicle structure and installation skills.
1.2 Installer and Supervisor Qualification
Supervisor Qualification and responsibility
1. He must be familiar with the installation requirements, the whole MDVR system (including MDVR device and the relative
accessories and PC software).
2. Assign the task to the installers and guild them for the installation
3. Control the installation schedule, installation inspection to make sure that installation is correct and safe.
Installer Qualification:
1. He must be trained and qualified for installation
2. He must comply with safety rules and use the installation tools safely
3. He must be very familiar with the vehicle working principle and the internal electronic equipment
1.3 Pre-installation Investigation and Installation Plan Making
Before installation, the installer must do the investigation to know more for the installation environment including:
1. He must know the vehicle which will be installed MDVR in
2. The point for installation and how to protect the MDVR and accessories.
3. Camera and some other accessories installation
4. He should prepare the suitable cable (the material for the cable and the length for the cable) for MDVR installation.
5. All the commonly-used materials should be listed to make sure the installation go fast
6. Some other that is helpful for installation

Installation Manual of ViPRO Mobile DVR - MVR series │ver. 1.1

- 6 -
1.4 Reference Installation Tool
Item
Name
Photo
Specification
Function
Remark
1
Electric Drill
Drill the holes
2
Drill bit
12mm
To drill the hole in the
vehicle to
get the
power cable ou
t getting
the power for the MDVR.
3
Drill bit
2.
8mm
To drill the hole for cameras,
monitor, bracket etc.
4
Philips
S
crewdriver
for
screwing manually
5
Digital
M
ultimeter
for voltage testing and
short-
circuit
6
Power cable and
extension
7
Wire Stripper
for cable split
ting and
connecting
8
Ribbon
9
Thread Forming
To fix the camera and
monitor
bracket
10
Log Bolts
for fixing MDVR machine and
protection box
11
Insulating Tape
for wrapping up the
wires

Installation Manual of ViPRO Mobile DVR - MVR series │ver. 1.1

- 7 -
12
Soldering
Iron
for welding
13
Tin Bar
14
Diagonal Pliers
for cable connecting
15
Crimping Pliers
for cable connecting
16
Scissors
for shrinkable tube cut
17
Heat Gun
for
shrinkable tube
encapsulation
18
Glass Clue Gun
for hole sealin
g and fixation
2. MDVR Device Installation
The basic Installation principal is:
1. All parts installation complies to the principal: same type vehicle, same installation point
2. Keep the vehicle clean and safe
The MDVR installation is the most part. Please make sure that the MDVR unit is fully and carefully tested
before installation to guarantee
1) MDVR working environment
The installer must know that MDVR works in harsh environment everyday and they have high requirements
for the environment and installer’s skill.
a) Anti-vibration: The MDVR device must be installed the place with week vibration (for example:
behind the driver’s seat). Installing the MDVR on the rear of the vehicle with strong vibration or
closing to the engine is forbidden.
b) Ventilation: The MDVR device must be far away for the heating source in the vehicle. The
installation point should be ventilated.
c) Waterproof and Moisture-proof: The device must be away from water or some other liquid source. If
necessary the external protection device is recommended (lock box or installation bracket)

Installation Manual of ViPRO Mobile DVR - MVR series │ver. 1.1

- 8 -
d) Dustproof: The device must be installed on the point with little dust
e) Installation points size: horizontal installing for MDVR device is recommend as it is easier for
installation and maintenance. The installation point size must be big enough and the MDVR device
cannot be surrounded with other subjects are it is not good for ventilation.
f) Electric: The MDVR device must be far away from electromagnetism environment to avoid the
strong interference.
g) Wiring: The cables should be hidden to keep the vehicle clean
2) MDVR Protection
If the MDVR has to be installed in the harsh environment (with much dust and high moisture or easily to be damaged
humanly), the lock box or installation bracket provided by manufacturer are recommended.
3) Installation
a) The MDVR must be installed horizontally (especially for the hard disk unit must be installed this way)
b) The MDVR and accessories must be fix firmly to avoid strong vibration
c) The IR receiver and the LED should (on the front panel of the MDVR) be toward to the direction with
easy operation
2.1 The Hard Disk Installation
Each MDVR is shipped with the hard disk installation manual. Please read it very carefully. The wrong installation will
shorten the life of the hard disk.
2.2 Power Connection
2.2.1 Power Wire Requirement
Power wire material: according to the MDVR device maximum load, power cable should be
1.5mm-2.5mm diameter BVV cable or with protection tube to ensure the wires are not frazzled and
damaged easily.
2.2.2 The Power Connection
The power supply is the basic and critical for MDVR device working. The connection and wiring is very
rigid for installation.
1) The MDVR power must be provided by the battery of the vehicle. It must be connected with the
positive and negative polarity of the battery directly (Below left diagram). Or the power connects the
vehicle power control box (Below right diagram). Any other ways for connection are forbidden as
this will cause the unstable power supply and affect MDVR working.

Installation Manual of ViPRO Mobile DVR - MVR series │ver. 1.1

- 9 -
OR
2) The power extension should be a little bit longer to leave some space for movement during the vehicle is
running.
The external protection tube (fire resistant PVC bellow) are recommended. The diameter for the cable is
required to be from 1.5mm to 2.5mm. Even for the bigger power consumption MDVR device or 12V vehicle with
the long distance wiring requires that the cable diameter should be 2.0mm copper material inside.
3) The power cable wiring should be vertical with the other cable wiring to avoid the equidirectional interference.
4) Security setting: safety device (like fuse) must be added between the device and battery.
2.3 MDVR Device installation
The installation diagram
1. The MDVR cannot be installed on the vehicle floor directly. MDVR housing must be insulated with the body of
the vehicle. External protection cap or box is necessary for waterproof and dustproof.
2. Horizontal installation is recommended by manufacturer
3. The LED light on the MDVR front panel should be outward for each checking the MDVR working status and
receiving the IR signal.

Installation Manual of ViPRO Mobile DVR - MVR series │ver. 1.1

- 10 -
4. Some tips for installation:
˄1˅ġ12V natural gas anti-interference isolation
When install the MDVR in 12V natural gas vehicles, the MDVR device must be insulated with the body of the
vehicle. Get power for the MDVR from vehicle battery directly and make sure to install the power protector and
security device between the MDVR device and battery.
炷2炸ġPay attention to the polarity of electric power switch control (polarity test method: disconnect control switch,
take a wire from battery negative polarity, test it with digital multimeter. Connect this wire by black pen on the
multimeter, then connect vehicle body with red pen. If the circuit is working, this means that vehicle power
switch control is positive. If not, it is negative. If the vehicle switch is negative, it is necessary to deal with the
insulation between MDVR device and the accessories.
˄3˅ġIt is very necessary for 12V battery-powered vehicles to deal with the insulation between the MDVR device and
the accessories of MDVR.
5. ACC cable requirements
炷1炸ġACC wire working principle
Actual wire: red is positive, black is negative, yellow is ignition signal.
The MDVR device does not work if yellow ignition signal wire is connected ground or nothing. Make sure ACC
voltage is higher than 7.5V (Please test the voltage before connection) before booting up the MDVR system for
ensuring normal operation.
炷2炸ġWhen the recording model for MDVR is timing recording, please make sure connect the yellow ignition signal
wire with battery positive polarity.
炷3炸ġSwitch power level value
Ignition
Signal
≤6V
Ignition OFF
≥7.5V
Ignition ON
6. All the wires connected to the rear panel of the MDVR should be wrapped together. The high frequency signal
cables should be shield by protected device. The connection should be strong and firm. All lines cannot be

Installation Manual of ViPRO Mobile DVR - MVR series │ver. 1.1

- 11 -
stretched. Protection solution are need for cable cut parts.
7. To fix the MDVR device well
2.4 How to Choose and Install Cameras
1) Camera Selection
There are 5 features should be considered for vehicle camera.
炷1炸ġThe monitored space for camera (Angle)
炷2炸ġThe size for the monitored objects
炷3炸ġFocus
炷4炸ġCCD size
炷5炸ġCamera is required to have a good IC reset circuit to avoid the black screen during recording.
Except the above 5 features, there are some others requirements for camera working environment.
炷1炸ġThe camera should be small and not heavy.
炷2炸ġShould support anti-vibration
炷3炸ġInfrared light is required to monitor during the night or in some places with week light.
炷4炸ġWaterproof and moistureproof
2) Camera Installation Regulation
炷1炸ġThe camera should be far away from heat source and electromagnetic interference in the vehicle.
炷2炸ġThe installation point should be safe avoiding camera damaged humanly.
炷3炸ġHow many cameras should be installed is depends on the vehicle size. Please make sure the camera
炷4炸ġAngle is big enough to cover all parts of the vehicle (excluding some special application).
炷5炸ġThe camera should be fixed well to avoid any human moving effecting the monitoring image.
炷6炸ġThe camera should be installed in the point with good luminance. Otherwise the infrared light working too long
time will affect the camera life.
3) Camera Installation Diagram
Usually required by bus operator or bus company, there are 4 cameras should be installed for one bus.
These cameras are used to monitor driver, coin box, rear door, road and every parts in the vehicles. The
infrared color camera is recommended.
炷1炸ġFront camera: To monitor the driver, the driver must drive correctly and safely to avoid the accident.
炷2炸ġThe wide angle camera is recommended. If the angle is big enough, it can monitor the driver and the road
forward together.
炷3炸ġCamera for coin box: To check whether some passengers get on the bus without paying
炷4炸ġRear door camera: To check whether some passengers get on the bus without paying (as there is no coin box
in some buses)
炷5炸ġRear camera: To monitor the whole vehicle inside for passenger behavior for example: thievery, fight)