ViSAGE FCM1000 User manual

Model Number: FCM1000
Foot and Calf Massager
INSTRUCTION MANUAL
AFTER SALES SUPPORT customercar[email protected]
1300 663 907 MODEL: FCM1000 PRODUCT CODE: 47893 12/2014
AUS

1
AFTER SALES SUPPORT customercar[email protected]
1300 663 907 MODEL: FCM1000 PRODUCT CODE: 47893 12/2014
AUS
Welcome
Congratulations on choosing to buy a Visage®product.
All products brought to you by Visage® are manufactured to the highest
standards of performance and safety, and, as part of our philosophy of
customer service and satisfaction, are backed by our comprehensive 1
Year Warranty.
We hope that you will enjoy using your purchase for many years to come.

2
AFTER SALES SUPPORT [e-mail]
1300 663 907 MODEL: FCM1000 PRODUCT CODE: 47893 12/2014
AUS
Contents
01 Welcome
03 Warranty Page
04 General Information and Safety Instructions
06 Features / Technical Specifications
07 Assembly and Parts List
08 Getting Started
10 Instructions
14 FAQ
16 Index
17 Repair & Refurbished Goods or Parts Notice

Warranty Details
The product is guaranteed to be free from defects in workmanship and parts for a period
of 12 monthsfrom the date of purchase. Defects that occur within this warranty period,
under normal use and care, will be repaired, replaced or refunded at our discretion.
The benefits conferred by this warranty are in addition to all rights and remedies in respect
of the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian ConsumerLaw.
You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage.You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
AFTER SALES SUPPORT
MODEL: FCM1000 PRODUCT CODE: 47893 12/2014
Foot and Calf Massager
1300 663 907
[e-mail]
AUS
YEAR WARRANTY
1

4
AFTER SALES SUPPORT [e-mail]
1300 663 907 MODEL: FCM1000 PRODUCT CODE: 47893 12/2014
AUS
General Information and
Safety Instructions
GENERAL INFORMATION & SAFETY INSTRUCTIONS
Read this manual thoroughly before rst use, even if you are familiar with this type of
product. The safety precautions enclosed herein reduce the risk of burns,re, electric
shock and injury when correctly adhered to. Keep the manual in a safe place for future
reference, along with the completed warranty card, purchase receipt and carton. If
applicable, pass these instructions on to the next owner of the appliance.
Always follow basic safety precautions and accident prevention measures when using an
electrical appliance, including the following:
• Do not use in dusty conditions.
• Do not drop the Foot and Calf Massager. Dropping or rough use of the unit will cause
damage.
• Do not place near strong magnets or strong electric currents.
• When the Foot and Calf Massager is not in use, turn off and unplug from any power
source.
• There are no user serviceable parts in the Foot and Calf Massager - do not attempt
to repair, open or alter any components. In the case of improper usage or if you have
opened, altered or repaired the product yourself, all guarantees are void.
• The supplier does not accept responsibility for additional or consequential damage
other than covered by legal product responsibility.
• The supplier is not responsible for the end use of this product including any improper
use or when used for purposes that are not specied.

5
AFTER SALES SUPPORT customercar[email protected]
1300 663 907 MODEL: FCM1000 PRODUCT CODE: 47893 12/2014
AUS
Warnings
1. Read all instructions before operating the Foot and Calf Massager for the rst time.
2. This appliance is intended to be used in household and similar applications such as:
– staff rooms, ofces and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments; bed and
breakfast type environments.
3. Do not stand while using the Foot and Calf Massager, as excess weight on the
internal mechanisms may cause damage. Do not use the appliance for other than
intended or specied purposes.
4. Persons with larger than average foot or calf size may have difculty or discomfort
with use. It is recommended to discontinue use.
5. When using the Foot and Calf Massager, you should experience improved blood
ow to foot and calf areas which may cause itchiness.
6. This appliance is not intended for use by persons with any kind of leg, foot or calf
injury. Please consult a doctor before use with these conditions.
7. Only use the Foot and Calf Massager with Australian Standard 220-240V AC
50/60Hz 10A rated power supply.
8. To avoid electrical shock, do not place the cord, plug or Foot and Calf Massager in
water or other liquids.
9. Do not operate appliance with wet hands or operate in a wet working environment.
10. Keep the Foot and Calf Massager and power cable away from heat sources and hot
surfaces.
11. Always protect the power cable from undue exing and wearing – do not allow the
cable to hang off edge of the counter or table.
12. If the supply cord is damaged, do not use the product. Contact customer service for
repair or replacement.
13. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
14. Do not leave your Foot and Calf Massager unattended when power is connected. It
is not recommended to use the Foot and Calf Massager for longer than 15 minutes
at a time.
15. Do not use this appliance with an external timer or separate remote-control system
of any kind.
16. Do not sit on the Foot and Calf Massager.
17. Do not use the Foot and Calf Massager if the fabric is torn or damaged.

6
AFTER SALES SUPPORT [e-mail]
1300 663 907 MODEL: FCM1000 PRODUCT CODE: 47893 12/2014
AUS
Features and Technical
Specifications
• 3 Foot Massage Settings
• 3 Calf Massage Settings
• 3 Heat Settings
• Carry Handles
• Height Adjustment Bar
• Removable Covers
• Rubber Feet
Model Specification: FCM1000
Voltage: 220-240VAC ~50Hz
Power: 80-110W
Heat Settings: 3
Foot Massager Settings: 3
Calf Massager Settings: 3
Weight: 11kg
Warranty: 1 Year
Features
Technical Specifications

7
AFTER SALES SUPPORT customercar[email protected]
1300 663 907 MODEL: FCM1000 PRODUCT CODE: 47893 12/2014
AUS
Assembly and Parts List
1. Height Adjustment Bar (below)
2. Leg Slots
3. Control Panel
4. Carry Handles (both sides)
5. Removable Covers
6. Rubber Feet
7. Power Connection
8. Power Switch/Fuse Slot
9. Power Cord
6
3
2
1
7
(Located at Back)
8
9
4
5

8
AFTER SALES SUPPORT [e-mail]
1300 663 907 MODEL: FCM1000 PRODUCT CODE: 47893 12/2014
AUS
Remove any packaging material and promotional labels before using your Foot and Calf
Massager for the first time.
• Do not setup the Foot and Calf Massager in the bathroom or any humid area.
• Ensure the Foot and Calf Massager is not exposed to direct sunlight for extended
periods.
• The Foot and Calf Massager comes pre-assembled, so you can plug it in for
immediate use.
Before First Use
Connect The Power Cable
Getting Started
WARNING: Do not connect the power in or near wet areas.
1. 2.
Locate the power connection at the
rear of the unit.
Plug in the supplied power cable
securely and connect it to a power
point and turn it on.

9
AFTER SALES SUPPORT customercar[email protected]
1300 663 907 MODEL: FCM1000 PRODUCT CODE: 47893 12/2014
AUS
CALF
HEAT
Press the ON/OFF button to turn the unit ON.
Navigating The Control Panel
I
II
III
I
II
III
III
II
I
CONTROL PANEL DESIGN
100% SCALING
Background:
PMS COOL GREY 9C
Buttons:
PMS COOL GREY 1C
Text:
100% Black
ALL IN MATT FINISH
ON/OFF button
Foot Massager Mode Selector button
Calf Massager Mode Selector button
Heat Mode Selector button
Choose between Modes: “I” - Slow Pulse
“II” - Medium Pulse
“III” - Constant
Choose between Modes: “I” - Slow Pulse
“II” - Medium Pulse
“III” - Constant
Press the Heat button to operate the Heating element. Choose
between Modes: “I”, “II” or “III” being the hottest.
FOOT
NOTE: When using the heat mode, allow a few minutes for the element to heat up.

10
AFTER SALES SUPPORT [e-mail]
1300 663 907 MODEL: FCM1000 PRODUCT CODE: 47893 12/2014
AUS
Press the ON/OFF button to start
operating. Select your desired
setting on the control panel.
Whilst seated, place your legs into
the slots.
When you are finished using the
Foot and Calf Massager, press the
ON/OFF button once to turn off and
allow the massage cycle to finish.
WARNING: Do not stand when placing your feet in the unit.
2.1.
3.
Using your Foot and Calf Massager for the first time.
Instructions
Turn the power switch at the rear
of the unit to “ON”. The Foot and
Calf Massager will operate for a
few seconds and the ON/OFF LED
indicator on the control panel will
flash.
4.
NOTE: The Foot and Calf Massager will automatically go into stand by mode after 15
minutes of use.

11
AFTER SALES SUPPORT customercar[email protected]
1300 663 907 MODEL: FCM1000 PRODUCT CODE: 47893 12/2014
AUS
Whilst seated, continue operation
as shown on page 10.
2.1.
Using The Height Adjustment Bar
The height adjustment bar can be used to angle the Foot and Calf Massager into a more
favourable position if desired.
Tilt the unit upwards and pull out
the height adjustment bar.
NOTE: When adjusting the height bar, ensure the unit is switched OFF.
Hints and Tips
Operation Tips
• Try to relax your feet and calf muscles while operating the unit.
• Do not wear too many layers of clothing while operating.
• Try alternating between different modes to nd your favourite massage sensation.
• Keep massage times under 15 minute duration.
• Do not turn the unit off at the power point during use or pull out the power cable; this
may prevent the massage cycle from completing, making it hard to remove your legs.
• Manoeuvre your legs during use to nd a comfortable position.

12
AFTER SALES SUPPORT [e-mail]
1300 663 907 MODEL: FCM1000 PRODUCT CODE: 47893 12/2014
AUS
Cleaning and Storage
To Clean
Unzip the covers. Hand wash or machine wash in cold or warm water. Always ensure the
covers are completely dry before re-attaching them.
Storage
Always store the Foot and Calf Massager in dry covered areas. Never store in damp
humid areas, or in direct sunlight.
Always switch off and unplug the appliance from the power outlet before cleaning. Wipe
down the exterior of the unit with a dry cloth. Do not use a moist cloth to clean the unit or
the power switch.
The Foot and Calf Massager has removable covers for easy cleaning and to help maintain
hygienic conditions.

13
AFTER SALES SUPPORT customercar[email protected]
1300 663 907 MODEL: FCM1000 PRODUCT CODE: 47893 12/2014
AUS
Ensure the Foot and Calf Massager is turned OFF and is unplugged from the wall.
Unplug the power cord from the unit.
Slide the fuse holder out from between the power switch and power connection.
Replace with a 5A fuse*.
Slide the fuse holder with the new fuse back into the slot.
*5A fuse not included
Fuse Replacement
The Foot and Calf Massager contains a fuse which is located in between the power
switch and power connection on the back of the unit.
In the case you need to replace the fuse, follow the instructions below.
1.
2.
3.
4.
5.

14
AFTER SALES SUPPORT [e-mail]
1300 663 907 MODEL: FCM1000 PRODUCT CODE: 47893 12/2014
AUS
FAQ
Problem Solution
My Foot and Calf
Massager won’t turn on
• Ensure the supplied power cable is plugged into
both the unit and power point. Ensure the switch at
the power supply and switch on the rear of unit are
turned on.
• Check the fuse, follow instructions on page 13.
The Power button LED
indicator is flashing
• The Foot and Calf Massager is on stand by.
My Foot and Calf
Massager is not
responding
• Check the power supply as listed above.
It is difficult to get my
feet out of the Foot and
Calf Massager
• Do not turn the main power supply off during use
otherwise the massage cycle may not end in the
open position.
• Wait for the massage cycle to nish before taking
your feet out; turning the power off at mains may
leave the massager in the closed position.
The Heat function is not
heating the unit
• Ensure you have selected either Heat Mode “I”, “II” or
“III” on the control panel. Allow a few minutes for the
element to heat up.
The Foot and Calf
Massager automatically
turns off during use
• The unit is designed to go into standby mode after 15
minutes of operation.

15
AFTER SALES SUPPORT customercar[email protected]
1300 663 907 MODEL: FCM1000 PRODUCT CODE: 47893 12/2014
AUS
Notes

16
AFTER SALES SUPPORT [e-mail]
1300 663 907 MODEL: FCM1000 PRODUCT CODE: 47893 12/2014
AUS
Index
Assembly and Parts List
Calf
Control Panel
FAQ
Features
Foot
Fuse
Getting Started
Heat
Height Adjustment Bar
Massage
Power Connection
Power Switch
Removable Covers
Technical Specification
Warnings
Warranty Page
Welcome
7
4, 5, 6, 8, 9, 10, 11, 12, 13, 14
7, 9, 10, 14
14
6
4, 5, 6, 8, 9, 10, 11, 12, 13, 14
7, 13, 14
8
5, 6, 9, 14
6, 11
4, 5, 6, 8, 9, 10, 11, 12, 13, 14
7, 8, 13
7, 10, 12, 13
6, 7, 12
6
5
3
1

Repair and Refurbished Goods
or Parts Notice
Unfortunately, from time to time, faulty products are manufactured which need to be returned
to the Supplier for repair.
Please be aware that if your product iscapable of retaining user-generated data (such as files
stored on a computer hard drive, telephone numbers stored onamobile telephone, songs
stored on a portable media player, games saved onagames console or files stored ona USB
memory stick) during the process of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to sending theproduct for repair.
You should also be aware that rather than repairing goods, we may replace them with
refurbished goods of the same type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only used where they
meet ALDI’s stringent quality specications.
If at any time you feel your repair is being handled unsatisfactorily, you may escalate your
complaint. Please telephone us on 1300 663 907 or write to us at:
AFTER SALES SUPPORT
MODEL: FCM1000 PRODUCT CODE: 47893 12/2014
1300 663 907
[email protected]
AUS
YEAR WARRANTY
1
Winplus Australasia
PO BOX 537
Bayswater Business Centre
Bayswater, VIC 3153
Winplus Help Desk 1300 663 907
(Operating Hours: Mon-Fri 08:30AM to 6:00PM)
[email protected]
www.winplus.com.au
Foot and Calf Massager