Vision CS-1900P User manual

1
CS-1900P_manual_en.doc
CS-1900P POWERED SPEAKERS
OWNERS MANUAL
www.visionaudiovisual.com/cs-1900p

2
CS-1900P_manual_en.doc
DECLARATION OF CONFORMITY
Where applicable Vision products are certified and comply with all known local regulations to a
‘CB Certification’ standard. Vision commits to ensure all products are fully compliant with all
applicable certification standards for sale in the EU and other participating countries.
The product described in this owner manual is in compliance with RoHS (EU directive
2002/95/EC), and WEEE (EU directive 2002/96/EC) standards. This product should be returned
to the place of purchase at the end of its useful life for recycling.
WARNINGS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle, is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
All products are designed and imported into the EU by ‘Vision’ who is wholly owned by ‘Azlan
Logistics Ltd.’, Registered in England Nr. 04625566 at Lion House, 4 Pioneer Business Park,
Clifton Moor, York, YO30 4GH. WEEE Registration: GD0046SY
DECLARATION OF ORIGIN
Vision products are made in the People’s Republic of China (PRC).

3
CS-1900P_manual_en.doc
USE ONLY DOMESTIC AC OUTLETS
Connecting the unit to an outlet supplying a higher voltage may create a fire hazard.
HANDLE THE POWER CORD WITH CARE
Do not disconnect the plug from the AC outlet by pulling the cord; always pull the plug itself.
Pulling the cord may damage it. If you do not intend to use your unit for any considerable
length of time, unplug the unit. Do not place furniture or other heavy objects on the cord, and
try to avoid dropping heavy objects on it. Do not tie a knot in the power cord. Not only could
the cord be damaged, but a short circuit could also be caused with a consequent fire hazard.
PLACE OF INSTALLATION
Avoid installing this product under the following conditions:
• Moist or humid places
• Places exposed to direct sunlight or close to heating equipment
• Extremely cold locations
• Places subject to excessive vibration or dust
• Poorly ventilated places
Do not expose this product to dripping or splashing. DO NOT PLACE OBJECTS FILLED WITH
LIQUIDS ON OR NEAR THIS PRODUCT!
MOVING THE UNIT
Before moving the unit, be sure to pull out the power cord from the AC outlet and disconnect
the interconnection cords with other units.
WARNING SIGNS
If you detect an abnormal smell or smoke, turn this product off immediately and unplug the
power cord. Contact your reseller or Vision.
PACKAGING
Save all packing material. It is essential for shipping in the event the unit ever needs repair.
IF ORIGINAL PACKAGING IS NOT USED TO RETURN THE UNIT TO THE SERVICE CENTRE,
DAMAGE IN TRANSIT WILL NOT BE COVERED BY WARRANTY.
WATTS
The most consistent standards for measuring watts are “Program Power” and “RMS” because
these measure average sustained levels.
Where loudspeakers have integrated amplifiers, then load (resistance, measured in ohms) is
known so the wattage rating is fixed.
HUMIDITY
These loudspeakers are not waterproof and are not designed to work in high humidity areas.

4
CS-1900P_manual_en.doc
CONNECTIVITY
Master Loudspeaker
Power Input
Line-level Input
2-phono and Minijack
summed
IR Receiver Switch
Speaker Output
Daisy-chain IN
3.5mm minijack
Daisy-chain OUT
3.5mm minijack
RS-232
9-pin d-sub
SW2 Button
For BT setup
Mini USB
for BT Setup

5
CS-1900P_manual_en.doc
SPEAKER CABLE
Speaker cable is included to connect master to slave. You can use other speaker cable; it must
be unshielded with a gauge of no less than 0.75mm. WARRANTY VOID IF YOU USE
UNSUITABLE SHIELDED CABLE E.G. PHONO OR MINIJACK CABLE.
IR RECEIVER SWITCH
FRONT - IR receiver on front active. Remote control can be used normally
REAR –IR receiver on rear active. Front IR receiver disabled. Suitable for control system
integration.
DAISY-CHAIN
Connect multiple sets together in larger rooms – no limit to number of sets. The first set in
chain is “master set” which switches inputs and adjusts volume.
Do not connect a laptop or phone directly to the daisy-chain input.
BLUETOOTH AUTO-SWITCHING
Use BT PRIORITY on remote control to enable auto-switching from line-level input to Bluetooth
input when a Bluetooth device is paired.
With BT PRIORITY on, When a BT device is unpaired the speakers will switch back to line-level
input.

6
CS-1900P_manual_en.doc
AUTO STANDBY
The loudspeakers go into standby after 10 minutes of inactivity.
•Bluetooth device NOT PAIRED when it goes into standby:
owake up when you pair a device or play audio though the line-level input.
•Bluetooth device PAIRED when it goes into standby:
oif BT input was selected: only Bluetooth source will wake them up.
oIf line-level input was selected: only line-level input will wake them up.
STATUS INDICATORS
BLUE – Bluetooth input
Flashing slowly: Bluetooth is in pairing mode
On: Device paired
YELLOW – Line-level input
On: cable input selected
RED LED –Standby
Flashing slowly: mute activated
Flashing quickly: IR from remote control being received
On: in standby

7
CS-1900P_manual_en.doc
REMOTE CONTROL
1. POWER On / Off
2. INPUT SELECT Bluetooth / Line-level (cabled) input
3. RESET tone factory reset
4. BLUETOOTH PRIORITY auto-switches when BT device paired
5. AUTO STANDBY activate or deactivate
6. MUTE
7. TONE treble and bass
8. VOLUME
9. BLUETOOTH activate or deactivate
10. DAISY-CHAIN MODE
a. MASTER Use when
i. Daisy-chain not in use
ii. Daisy-chain in use, this is “master” set, managing inputs and
adjusting volume
b. SLAVE Use when this is a slave set in a daisy-chain.
1
2
3
4
5
6
7
8
9
10

8
CS-1900P_manual_en.doc
INSTALLATION
1. CUT HOLES IN CEILING TILES Draw around the cardboard template included. Cut along
this line. Hole diameter 198 mm / 7.8".
NOTE: can only be fitted where there is a false ceiling.
2. REMOVE GRILLE Remove from loudspeakers.
3. LOOSEN CLAMPS Loosen screws shown. Turn mounting clamps in.
4. PUT INTO CEILING TILE Tighten screws
Mounting clamp
Mounting clamps

9
CS-1900P_manual_en.doc
BLUETOOTH INPUT
DEFAULT PIN: 0000
If “Bluetooth Priority” is on speakers automatically switch to Bluetooth source when device is
paired.
CHANGE BLUETOOTH DEVICE NAME AND PIN
1. INSTALL BLUESUITE SOFTWARE
Download from https://visionaudiovisual.com/cs-1900p/ (windows only)
2. PAIR PHONE TO SPEAKERS
3. PRESS AND HOLD SW2 BUTTON Release when Blue LED turns off.
4. CONNECT PC TO SPEAKERS WITH USB CABLE (NOT INCLUDED).
5. RUN PSTool. Select TRANSPORT and select USB\csr0 port
NOTE: if port not showing load drivers manually from
C:\Program Files (x86)\CSR\BlueSuite 2.6.4\drivers

10
CS-1900P_manual_en.doc
6. TYPE “NAME” IN FILTER Adjust then select Set
7. TYPE “FIX” IN FILTER The current PIN in this example is shown below:
Adjust PIN (last digit of each group), then press Set and Reset BC.
PIN: 0 0 0 0

11
CS-1900P_manual_en.doc
RS-232 CODES
This product can be controlled with the included remote control or by a professional AV control
system using RS-232 codes.
Baud Rate: 9600
Stop Bit: 1
Check digit: none
Transmission interval: more than 80 ms
Receive format: HEX
Reply format: ASCII
Pin 2 – Rx
Pin 3 – Tx
Pin 5 – GND
A command is structured of 99 then the command twice
e.g. turn on: send 99 then send 11 twice.
Each part of the code is preceded by “0x” so the longhand is 0x99 0x11 0x11
HEX Codes On Remote Function
99 11 11 ON Bring out of standby
99 15 15
OFF
Put into standby
99 05 05
MUTE
Mute
99 DA DA
UN-MUTE
Unmute
99 01 01 BLUETOOTH Input select “Bluetooth”
99 09 09
LINE IN
Input select “Line In”
99 08 08 TREBLE+ Increase treble gain by +1dB
99 0D 0D
TREBLE-
Decrease treble gain by -1dB
99 0C 0C BASS+ Increase bass gain by +1dB
99 12 12
BASS-
Decrease bass gain by -1dB
99 10 10 RESET Reset tone
99 07 07
VOL+
volume + (also cancels mute if active)
99 0B 0B VOL- volume - (also cancels mute if active)
99 02 02 BTPRIORITY ON BT PRIORITY ON
99 04 04 BTPRIORITY OFF BT PRIORITY OFF

12
CS-1900P_manual_en.doc
99 00 00 AUTOSTANDBY ON AUTO STANDBY ON
99 5C 5C
AUTOSTANDBY OFF
AUTO STANDBY OFF
99 5C 5C
BT_ON_OFF
Bluetooth on/off toggle
99 5C 5C
MASTER_SLAVE
Mode toggle
99 A0 A0 Volume Step 0 minimum
99 A1 A1 Volume Step 1
99 A2 A2 Volume Step 2
99 A3 A3 Volume Step 3
99 A4 A4 Volume Step 4
99 A5 A5 Volume Step 5
99 A6 A6 Volume Step 6
99 A7 A7
Volume Step 7
99 A8 A8 Volume Step 8
99 A9 A9
Volume Step 9
99 AA AA Volume Step 10
99 AB AB
Volume Step 11
99 AC AC Volume Step 12
99 AD AD Volume Step 13
99 AE AE Volume Step 14
99 AF AF Volume Step 15
99 B0 B0 Volume Step 16
99 B1 B1
Volume Step 17
99 B2 B2
Volume Step 18
99 B3 B3 Volume Step 19
99 B4 B4 Volume Step 20
99 B5 B5 Volume Step 21
99 B6 B6 Volume Step 22
99 B7 B7 Volume Step 23
99 B8 B8 Volume Step 24
99 B9 B9 Volume Step 25
99 BA BA
Volume Step 26
99 BB BB Volume Step 27
99 BC BC
Volume Step 28

13
CS-1900P_manual_en.doc
99 BD BD Volume Step 29
99 BE BE
Volume Step 30
99 BF BF
Volume Step 31
99 C0 C0
Volume Step 32
99 C1 C1 Volume Step 33
99 C2 C2 Volume Step 34
99 C3 C3 Volume Step 35
99 C4 C4 Volume Step 36 maximum
Note: if slave mode selected the speaker will only respond to MASTER_SLAVE CODE.

14
CS-1900P_manual_en.doc
Return Codes
HEX Codes
Name
Function
Return
codes
Remarks
99 D0 D0
STANDBY
Speaker
working Status
0
1
ON/Working = 1
OFF/Standby = 0
99 D1 D1
MUTE
Mute Status
0
1
Mute Off = 0
Muted = 1
99 D2 D2
PT2314E_SELECT
Input Select
Status
0
1
Bluetooth = 0
Line In = 1
99 D3 D3
PT2314E_GAIN_GET
Volume Gain
Status
0
36
36 steps total
99 D4 D4
PT2314E_B_GAIN_GET
Bass Gain
Status
0
14
14 steps total
99 D5 D5
PT2314E_T_GAIN_GET
Treble Gain
Status
0
14
14 steps total
BT_BIT
Bluetooth
status
0
2
BT paired = 0
99 D6 D6
BT pairing = 1
BT OFF = 2
99 D7 D7
BT_PRIORITY
BT Priority
Status
0
1
BT Priority OFF = 0
BT Priority ON = 1
99 D8 D8
AUTO_STANDBY
Auto standby
Status
0
1
Auto standby OFF = 0
Auto standby ON = 1
99 D8 D8
AUTO_STANDBY
Auto standby
Status
0
1
Auto standby OFF = 0
99 D9 D9
OPERATION_MODE
Master/Slave
mode status
MASTER / SLAVE
Note: if slave mode selected the speaker will only respond to STANDBY, AUTO_STANDBY, and
OPERATION_MODE.
Replies are given in ASCII.

15
CS-1900P_manual_en.doc
Example 1
99 D0 D0 = Get Standby returns
ASCII: 0 / HEX: 0X 00 = Off
ASCII: 1/ HEX: 0X 01 = On
(X in the HEX string is literal)
Example 2
99 D2 D2 = Get Input Select
ASCII: 0 / HEX: 0X 00 = Bluetooth
ASCII: 1 / HEX: 0X 01 = Line Input
Example 3
Code Sent
Reply

16
CS-1900P_manual_en.doc

17
CS-1900P_manual_en.doc
LIFETIME RETURN-TO-BASE WARRANTY
This product comes with a lifetime return to base warranty. If you have a problem you are
required to provide a DETAILED DESCRIPTION of the fault.
Some Vision products are very technical and require troubleshooting all elements of the
installation as it may not be the Vision product at fault. Because of this the manufacturer may
refuse to replace the item if an adequate description is not provided.
•This warranty applies only to the original purchaser and is not transferable.
•This warranty protects you against the following:
oFailure of any components, including the power supply.
oDamage when the product is first removed from its packaging if reported within
24 hours of purchase.
•If the product is DOA (dead on arrival), you have 21 days from purchase date to notify the
national distributor via your AV reseller.
•The original purchaser is responsible for shipment of the product to the Vision’s appointed
service centre.
•The liability of Vision is limited to the cost of replacement of the faulty unit under warranty
except for death or injury (EU85/374/EEC).
•If the product is end of line (EOL) the Vision will provide a credit instead of replacement.
•This warranty does not protect this product against faults caused by abuse, misuse,
incorrect installation, unstable or faulty power input, or modification.
Vision aims to send a replacement item within 5 working days however this may not always be
possible, in which case it will be sent as soon as practicably possible.
LEGAL DISCLAIMER: Because we are committed to improving our products, the details above
may change without prior warning. This User Manual is published without warranty and any
improvements or changes to the User Manual necessitated by typographical errors, inaccuracies
of current information, or improvements to programs and/or equipment, may be made at any
time and without notice. Such changes will be incorporated into new editions of the User
Manual.

1
CS-1900P_manual_de.doc
CS-1800P AKTIVLAUTSPRECHER
BEDIENUNGSANLEITUNG
www.visionaudiovisual.com/de/cs-1900p

2
CS-1900P_manual_de.doc
KONFORMITÄTSERKLÄRUNG
Falls zutreffend sind Vision-Produkte zertifiziert und entsprechen allen bekannten lokalen
Vorschriften der Normen für „CB-Zertifizierung“. Vision verpflichtet sich sicherzustellen, dass alle
Produkte mit allen anwendbaren Zertifizierungsnormen für den Verkauf in der EU und anderen
teilnehmenden Ländern in vollem Umfang übereinstimmen.
Das in dieser Bedienungsanleitung beschriebene Produkt erfüllt die Anforderungen von RoHS
(EU-Richtlinie 2002/95/EC) und WEEE (EU-Richtlinie 2002/96/EC). Dieses Produkt ist nach Ende
der Nutzungsdauer an die Verkaufsstelle oder zu einer anderen Sammelstelle zurückzubringen.
WARNHINWEISE
VORSICHT: GEFAHR EINES STROMSCHLAGS NICHT ÖFFNEN
VORSICHT: UM STROMSCHLÄGE ZU VERMEIDEN, GEHÄUSE (UND RÜCKSEITE) NICHT
ÖFFNEN. ENTHÄLT KEINE VOM BENUTZER ZU WARTENDEN TEILE IM INNEREN DES
GERÄTS. WARTUNG NUR DURCH QUALIFIZIERTES FACHPERSONAL DURCHFÜHREN
LASSEN.
Der Blitz mit dem Pfeilkopf im gleichseitigen Dreieck soll den Benutzer auf „gefährliche Spannung”
durch nicht isolierte Teile im Gehäuseinneren hinweisen. Diese kann so groß sein, dass bei
Stromschlag eine Gefahr für Personen besteht.
Das Ausrufungszeichen im gleichseitigen Dreieck soll den Benutzer auf wichtige Bedienungs- und
Wartungsanweisungen in der dem Gerät beiliegenden Bedienungsanleitung aufmerksam machen.
WARNUNG: UM EINEN BRAND ODER EINEN STROMSCHLAG ZU VERMEIDEN, SETZEN
SIE DAS GERÄT NIEMALS REGEN ODER FEUCHTIGKEIT AUS.
Alle Produkte werden von Vision entwickelt und in die EU importiert. Vision ist eine 100%-ige
Tochter der Azlan Logistics Ltd., eingetragen in England unter Nr. 04625566 mit Geschäftssitz
Lion House, 4 Pioneer Business Park, Clifton Moor, York, YO30 4GH. WEEE-Registrierung:
GD0046SY

3
CS-1900P_manual_de.doc
URSPRUNGSERKLÄRUNG
Alle Vision-Produkte werden in der Volksrepublik China (VR China) hergestellt.
NUR ORTSÜBLICHE AC-STECKDOSEN VERWENDEN
Wenn das Gerät an eine Steckdose mit höherer Spannung angeschlossen wird, kann diese einen
Brand verursachen.
NETZKABEL VORSICHTIG BEHANDELN
Den Stecker nicht durch Ziehen am Kabel trennen; immer am Stecker aus der Steckdose ziehen.
Durch Ziehen am Kabel kann selbiges beschädigt werden. Wenn das Gerät für einen längeren
Zeitraum nicht verwendet werden soll, die Stromverbindung trennen. Keine Möbel oder andere
schwere Objekte auf das Kabel stellen und keine schweren Objekte darauf fallen lassen. Nicht
verknoten. Dadurch kann das Kabel beschädigt werden und es besteht Brandgefahr durch
Kurzschluss.
AUFSTELLORT
Unter folgenden Bedingungen sollte das Produkt nicht verwendet werden:
• An feuchten oder nassen Orten
• An Orten mit direkter Sonneneinstrahlung oder in unmittelbarer Nähe von Heizquellen
• An extrem kalten Orten
• An Orten, an denen das Gerät übermäßigen Vibrationen oder Staub ausgesetzt ist
• An schlecht belüfteten Orten
Dieses Produkt darf nicht mit Wasser in Berührung kommen. KEINE FLÜSSIGKEITEN AUF ODER
NEBEN DIESES PRODUKT STELLEN!
UMSETZEN DES PRODUKTS
Bevor Sie den Standort des Produkts ändern, den Stecker aus der Steckdose ziehen und die
Verbindungskabel zu anderen Geräten trennen.
WARNZEICHEN
Wenn Sie einen ungewöhnlichen Geruch oder Rauch wahrnehmen, das Produkt sofort
ausschalten und das Netzkabel aus der Steckdose ziehen. Wenden Sie sich an Ihren Händler
oder an Vision.
VERPACKUNG
Heben Sie das gesamte Verpackungsmaterial auf. Dies ist für den Versand des Geräts im
Reparaturfall erforderlich.
WENN DAS PRODUKT NICHT IN DER ORIGINALVERPACKUNG AN DAS
KUNDENDIENSTZENTRUM GESCHICKT WIRD, BESTEHT KEINE GEWÄHRLEISTUNG FÜR
TRANSPORTSCHÄDEN.
WATT
Die genauesten Standards zum Messen von Wattzahlen sind „Program Power” und „RMS”
(Effektivwert), weil hierbei der durchschnittlich erreichte Pegel gemessen wird.
Bei Lautsprechern mit integrierten Verstärkern ist die Last (Widerstand, gemessen in Ohm)
bekannt, wodurch die Nennleistung festgelegt ist.