VisionTrack VT2.2 Use and care manual

THE UK'S MOST AWARD-WINNING CAMERA TELEMATICS COMPANY
www.visiontrack.com
INSTALLATION AND
CALIBRATION GUIDE
VT2.2

The VT2.2 is an industry-leading, 2-channel connected
full-HD vehicle camera, with GPS/GLONASS, G-shock
sensor and built-in Wi-Fi (VT2.2 can connect to your
network access point, THIS IS NOT A WIFI HOTSPOT).
The super-wide viewing angle provides
high-resolution images before, during and after any
incident.
The VT2.2 can be connected to our telematics
platform and includes an optional secondary camera
offering the ability to monitor and record footage of
the driver or passengers.
VT2.2 INSTALLATION & CALIBRATION GUIDE
t [phone] | ssupport.visiontrack.com | wvisiontrack.com
1
Overview
Key features:
Industry-leading, connected
and HD-quality vehicle camera
and telematics system
Provides First Notification
of Loss (FNOL) alerts
Accurate G-shock sensor
measures impact force and
driving style
Built-in GPS and GLONASS
receiver with self-checking
notifications
Provides HD images before,
during and after an incident
Monitor driver behaviour from
anywhere using the VisionTrack
IoT platform
256
GB

VT2.2 INSTALLATION & CALIBRATION GUIDE
t [phone] | ssupport.visiontrack.com | wvisiontrack.com
2
VT2.2 Installation:
1
2
Adjust the bracket up or down by removing the screw first (see below), then adjust the angle
depending on the specific angle of your windscreen and tighten the screw to lock.
Provided is a 3M™ adhesive pad, please attach to the VT2.2 bracket. Once attached, press firmly
onto the windscreen. (See page 6 for mounting position)
2.
1.

VT2.2 INSTALLATION & CALIBRATION GUIDE
t [phone] | ssupport.visiontrack.com | wvisiontrack.com
3
3IMPORTANT: Degrease and clean windscreen before attaching.
After the windscreen is clean, secure the VT2.2 behind the rear-view mirror, below the windscreen
tint. Place the camera as high on the windscreen as possible, but still within the windscreen wiper
area.
VT2.2
DO NOT APPLY CAMERA TO TINTED WINDSCREEN SURROUND. MUST BE STUCK TO
CLEAR GLASS TO AVOID ANY GPS SIGNAL INTERFERENCE.
Rear-View Mirror
Windscreen Tint
Windscreen
Rear-View
Mirror Windscreen
Camera Lens
VT2000
Rear-View
Mirror
Windscreen
Tint
VT2000

VT2.2 INSTALLATION & CALIBRATION GUIDE
t [phone] | ssupport.visiontrack.com | wvisiontrack.com
4
VT2.2 Calibration:
1
2
On start-up, the GREEN light will flash and the BLUE light will stay solid, once the camera is
operational you will hear an audio beep.
Park your vehicle on a flat surface and press and hold calibration button for 5 seconds, the
camera will beep again.
Record LED
Blue LED
Communication LED
Green LED
G-Sensor
calibration button
2.

THE UK'S MOST AWARD-WINNING CAMERA TELEMATICS COMPANY
www.visiontrack.com
VT2.2 INSTALLATION & CALIBRATION GUIDE
t [phone] | ssupport.visiontrack.com | wvisiontrack.com