Vivo MOUNT-KB05-4D User manual

Clamp-on Keyboard Tray with Pencil Drawer
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-kb05-4d
SKU: MOUNT-KB05-4D
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
ALLATION
Right
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
Phillips
Screwdriver
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
A(x6)
M4x7
B(x8)
M5x12
D(x4)
M5x12
F (x2)
Slider Bracket
C(x2)
Pad
E(x1)
Keyboard
Tray
G (x2)
Clamp
H (x1)
Pencil Drawer
I (x2)
Drawer Slider
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

3
F
G
AA
Left
ASSEMBLY STEPS
STEP 1
ALLATION
F
G
A
Right
Assemble slider brackets (F) to the clamps (G) using M4x7 bolts (A). Tighten with a Phillips
screwdriver.

4
STEP 2
Assemble the slider brackets with clamps to the keyboard tray (E) using M5x12 bolts (B), and tighten
with a Phillips screwdriver. The clamps must be on the opposite end from the center cable guide.
B
B
E
Right
Left

5
STEP 3
Slide the pencil drawer (H) back into the open ends of the drawer sliders (I) until parts are
latched together.
ATION
I
H

6
STEP 4
Mount the assembled pencil drawer (H) to the underside of the keyboard tray (E) using M5x12 screws
(D) with a Phillips screwdriver.
D

7
STEP 5
Place pads (C) on the underside of each clamp. Place the assembled keyboard mount on the edge of
the desk and tighten clamps.
NOTE: To ensure keyboard tray is level, do not over-tighten the clamps.
Slide the keyboard tray and pencil drawer forward/back to the desired position.
Desktop
C

LAST UPDATED: 12/11/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303