Vivo MOUNT-MS02DW User manual

White Wooden Arm Rest and Mouse Pad
Instruction Manual
SKU: MOUNT-MS02DW
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/mount-ms02d

2
STEP 1
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Phillips
Screwdriver
TOOLS NEEDED
Loosen velcro straps on Mouse Pad and Arm Rest (A, B) keeping them in the same location. Place
the Adjustment Plate (C) on the Mouse Pad and Arm Rest (A, B) making sure the plate is able to slide
freely underneath the velcro straps.
WARNING!
PACKAGE CONTENTS
A (x1)
Mouse Pad
B(x1)
Arm Rest
C(x1)
Adjustment Plate
E (x1)
Wrist Pad
D(x1)
Support Plate Set
S-A (x8)
M4x10 Screws
ASSEMBLY STEPS
C
A
B

3
STEP 2
Place the loose assembly on a chair arm rest while sitting in the chair. Make adjustments by sliding the
Mouse Pad and Arm Rest (A, B) along the Adjustment Plate (C).
NOTE: Adjustments are based on your arm length and chair setup. Ensure you are sitting comfortably
for final arm fitment.
STEP 3
Loosely assemble the Support Plate Set (D) with the rubber padding facing outwards using M4x10
Screws (S-A). Make sure the Adjustment Plate (C) is still able to slide freely.
S-A
D
B
A
C
C

4
STEP 4
Flip the assembly over. Loosely assemble the Adjustment Plate (C) with the closest mounting holes to
the Mouse Pad and Arm Rest (A, B) using M4x10 Screws (S-A).
NOTE: If you do not see the mounting point slide the Adjustment Plate until it shows through one of
the holes.
S-A
A,B
Closest Hole
C

5
STEP 5
Place the assembly back on the arm rest and check for what strap locations will work for your chairs
armrest. If a strap is not being used where it is currently located, remove the strap and move it onto the
Adjustment Plate (C) using the available slots.
NOTE: The velcro side of the strap should be facing down towards the top of the mouse pad and arm
rest when installed.
Non-textured side up
(Velcro side down)

6
STEP 6
Go back and fully tighten all eight M4x10 Screws (S-A) previously inserted, securing the Adjustment
Plate and Support Plate Set (C,D).
STEP 7
If you want to use the wrist pad, remove protective film from adhesive on the bottom of the Wrist Pad
(E) and place at desired location.
NOTE: For best results you can remove and reposition the wrist pad up to 3 times.
E
S-A
D
C

7
STEP 8
Place the Mouse Pad and Arm Rest back onto your chair arm and secure it by tightening the velcro
straps.
NOTE: The velcro straps may be cut aer the product is fully secured to your armrest in the desired
position.
Excess velcro
may be cut away

LAST UPDATED: 03/08/2022
REV 1.0
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303