Vivo DESK-V000EB V000EB User manual

E (x1)
4mm
G (x2)
Packag Contnts
Tools Rquird
phillips screwdriver, scissors
Scan the QR code with your mobile device or follow
the lin to helpful videos and specifications related
to this product.
- -https//vivo us.com/products/dsk v000b
A (x1) B (x2) C (x1)
D (x6)
F (x1)
H (x1)
Carefully remove des top
from pac aging and set on
table. Cut ties from des top.
Stp 1
Assmbl Stps
Secure brac ets (B) to
eyboard tray (C) using the six
screws (D).
Stp 2
1
Sit and Stand Dsktop
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371-5654
-Modl DES% V000EB
.

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Chec carefully to ma e sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371-5654
For more VIVO products, chec out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Saft Warning
Contact us at
Last updated: 4/17/2018
Online Version
2
Stp 3
Stp 4
Plug the power cable into the wall
and press the switch on the right
side to raise the des top.
Hang eyboard tray over pre-
installed screws, and tighten
screws using the allen ey (E).
The USB 2.0 port allows for charging
phone, tablet, or other device.
Stp 5
Attach cable clip (F)
where desired.
Wall
Place the monitor on des and manage cables.
Soc et
Plug the power
cable (H) into
the wall.