Vivo CART-V02DB User manual

Black 28” Mobile Computer Workstation
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/cart-v02db
SKU: CART-V02DB
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A1 (x4)
M6x20
A2 (x18)
M6x30
A3 (x2)
M6x35
A4 (x1)
Allen Wrench
A5 (x1)
Wrench
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF CART.
• USE TIPOVER RESTRAINT OR ANCHOR CART TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
G1 (x2)
Caster
G2 (x2)
Locking
Caster
G3 (x2)
Plastic
Sleeve
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
B1 (x1)
Base
B2 (x1)
Lower Shelf
B3 (x1)
Le Leg
B4 (x1)
Right Leg
B5 (x1)
Shelf Support
Bar
B6 (x1)
Upper Shelf
B7 (x1)
Keyboard Shelf
B8 (x2)
Desktop
Support Bar
B9 (x1)
Desktop
132lbs
(60kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
PER SHELF

3
ASSEMBLY STEPS
STEP 1
Screw the casters (G1, G2) into the base
(B1). Tighten the casters to the base using
the wrench (A5) and insert the plastic
sleeves (G3) into the top of the base.
NOTE: Lock the casters to prevent rolling
during assembly.
STEP 2
Assemble the lower shelf (B2) to the base using x4 M6x30 bolts (A2), and tighten with the Allen
wrench (A4).
STEP 3
Insert the legs (B3, B4) into the top of the base, and secure
using M6x20 bolts (A1) underneath. Tighten with the Allen
wrench (A4).

4
STEP 4
Attach the shelf support bar (B5) and desktop support bars (B8) to the legs using x6 M6x30 bolts (A2)
and tighten with the Allen wrench (A4).
NOTE: Make sure to use the holes closest to the front (short end) of the desktop support bars.
STEP 5
STEP 6
Place the upper shelf (B6) on top of the support bar and secure with M6x35 bolts (A3) and the Allen
wrench (A4). Place the keyboard shelf (B7) on the front supports of the legs and secure using x4 M6x30
bolts (A2) and the Allen wrench (A4).
Place the desktop (B9) on top of the desktop
support bars, making sure to align the large
holes with the screw heads, and secure using x4
M6x30 bolts (A2) and the Allen wrench (A4).

5
STEP 7
NOTE: Make sure the cart is sitting level on all casters. If adjustment
is needed, unscrew each caster as needed, and then use the wrench
(A5) to tighten the top nut on each loosened caster against the base.

6
STEP 8

7
STEP 8
TO RAISE THE CART:
Loosen the knob on the back of each leg. With your foot holding the base, pull up evenly on the
desktop until the legs lock at the desired height (do not pull up beyond “Max”). Retighten the knobs.
TO LOWER THE CART:
Loosen the knob on the back of each leg. With your foot holding the base, firmly pull up on the desktop
until it has stopped at the maximum height (“Down” will be visible on the sides), then gently set back
down to the minimum height. Retighten the knobs.

LAST UPDATED: 04/16/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303