Vivo DESK-V000LC User manual

35”x 15.5” Sit-Stand Desktop Workstation
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v000lc
[email protected]om www.vivo-us.com 1-800-371-5654
SKU: DESK-V000LC

2 3
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
TOOLS NEEDED
Scissors
33 lbs
(14.97kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Carefully remove desk frame and contents from packaging. Cut ties from frame (A).
STEP 2
Press the release handles and raise the desktop.
WARNING!
A (x1)
Desktop
B (x1)
Keyboard
Tray
C (x4)
Sleeve Nut
D (x1)
Screwdriver
Do not press the release handle while cutting
off the plastic strip lock. Only press the release
handle in an upright position.
A

4 5
STEP 3
Insert the sleeve nuts (C1) into the top of the keyboard tray (B).
STEP 5
Place keyboard tray (B) on metal brackets on desk
(A). Secure keyboard tray to brackets using screws
(C2) and screwdriver (D).
STEP 4
Separate parts (C) into sleeve nut (C1) and screw (C2).
C
C1
C2
B
C1 C2
D

6 7
STEP 6
Remove the plastic cap from the desktop to t the monitor desk mount.
Attach the cable management clips to organize cables. Loosen knobs to adjust keyboard tray tilt angle.
132
+10°
-10°
+10°
-10°
Raise desktop
slowly to keep
items stable.
Keep monitor and
laptop base fully on
the desktop.
Leave enough slack
in cable to allow for
full range of vertical
motion (15” / 38 cm).
Follow the cable
routing instructions to
avoid the potential to
pinch cables.
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.

Last Updated: 9/19/2018
If any parts are received damaged or defective, please contact us. We are happy to
replace parts to ensure you have a fully functioning product.
For more VIVO products, check out our website at:
www.vivo-us.com.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]om www.vivo-us.com 1-800-371-5654