Vivo CART-V06A User manual

1
Sit and Stand Workstation
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Model: CART V06A
Scan the QR code with your mobile device or follow the link to
helpful videos and specifications related to this product.
Tools Required:
phillips screwdriver
Package Contents
A M x12 (x37)
B M x16 (x6)
C M8x12 (x4)
D 20x8x1 (x4)
E 17x8.2x (x4)
F Wrench (x1)
- -https://vivo us com/products/cart v06a
1
2
4
3
6

2
Assembly Steps
Step 1
Screw casters (7) into underside of base. Tighten with
wrench (E).
7
H
Step 2
2
Assemble poles to base using x9
M6x12 screws (C), making sure the
pole with the release lever is installed
in the center.
Step 3
Install support plate (3) to poles using x6 M6x12 screws
(C). Tighten with 4mm Allen wrench (D).
Step 4
Assemble desktop (1) using x10 M x12 screws (A). Secure release lever
handle to desktop with x3 M x12 screws (A).

3
Install keyboard shelf brackets (2) to desktop using x6 M x12 screws (A).
Curved slots must be facing towards the front.
Step 5
Secure center pole to desktop with x4 M x20 screws (B).
Step 6
Step 7
Mount keyboard shelf (4) to brackets with x6 M x12
screws (F).
Step 8
Ensure the handle is correctly pulling on the release cable. If the release
cable tension is too high (height will not lock) or too low (desk will not raise or
lower), turn the nuts at the end of the black tube near the handle to adjust
the tension.
Press the handle on each
side up and down

4
If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Safety Warning
Contact us at:
Last updated: 4/23/2018
Step 9
To adjust height, lift release lever handle.
Keyboard tray can
slide in and out.