Vivo CART-V06A User manual

Black 35” Mobile Computer Workstation
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/cart-v06a
SKU: CART-V06A
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x19)
M5x12
B (x4)
M5x20
C (x9)
M6x12
E (x1)
4mm Allen
Wrench
F (x1)
Wrench
G (x6)
M5x12 Flathead
1 (x1)
Desktop
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF CART.
• USE TIPOVER RESTRAINT OR ANCHOR CART TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
2 (x2)
Shelf Bracket
3 (x1)
Support Plate
4(x1)
Keyboard Shelf
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
5 (x3)
Telescopic Pole
6 (x1)
Base
33 lbs
(15 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury. 4.4 lbs
(2 kg)
DESKTOP TRAY
7 (x4)
Locking Caster
D (x6)
M6x15

3
ASSEMBLY STEPS
STEP 1
Screw locking casters (7) into the base (6) and tighten with the wrench (F).
STEP 2
Assemble telescopic pole with release lever (5) to the center of the base using x3 M6x12 bolts (C).
Assemble telescopic poles to sides of the base using x6 M6x15 bolts (D). Tighten all bolts with the 4mm
Allen wrench (E).

4
STEP 3
Install support plate (3) to poles using x6 M6x12 bolts (C) and tighten with the Allen wrench (E).
Assemble desktop (1) to support plate using x10 M5x12 screws (A). Secure release lever handle to
desktop with x3 M5x12 screws (A). Tighten with a Phillips screwdriver.
STEP 4

5
STEP 5
Secure center pole to desktop with x4 M5x20 screws (B) and tighten with a Phillips screwdriver.
Install keyboard shelf brackets (2) to desktop using x6 M5x12 screws (A), making sure the curved slots
are facing towards the front. Tighten screws with a Phillips screwdriver.
STEP 6

6
STEP 7
Mount keyboard shelf (4) to brackets with x6 M5x12 flathead screws (G) and tighten with a Phillips
screwdriver.
Ensure the handle is correctly pulling on the release cable. If the release cable tension is too high
(height will not lock) or too low (desk will not raise or lower), turn the nuts at the end of the black tube
near the handle to adjust the tension.
STEP 8

7
STEP 9
To adjust height, li the release lever handle and move the desktop up or down.

LAST UPDATED: 03/04/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303