Step 2: Install Keyboard Tray
Step 3: Adjust to Desired Height
Attach keyboard shelf
bracket (B) to desk with
bolts (E), and tighten with
screwdriver.
Squeeze the handle on
the right side, then raise
or lower desktop to
desired height.
Mount keyboard shelf (C)
to bracket using bolts (D).
Step 4: Place Items on Desk
Place items on desk.
Please be sure not to
exceed 17.6lb rated
weight limit.
E
B
C
D
Safety Warning
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check carefully to
make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. We cannot be liable for damage or injury
caused by incorrect assembly or inappropriate use.
Contact us at:
Email: help@vivo-us.com
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact us. We are happy
to replace parts to ensure you have a fully functioning product.
Warnings!
Keep monitor and laptop base fully on the
desktop. Allowing any part of base or stand to
hang off the edge may result in property
damage and or personal injury.
Raise desktop slowly. Raising desktop too fast
may create an unstable situation resulting in
property damage and or personal injury.
Leave enough slack in cable to allow for full
range of vertical motion (1 ” / 38 cm). Failure to
heed this warning may result in property
damage and or personal injury.
To avoid the potential to pinch cables it is
important to follow the cable routing instructions
in this manual. Failure to follow these
instructions may result in equipment damage or
personal injury.
2
Last updated: 4/17/2018
Online Version
