Vivo CART-V03P User manual

Mobile Stand Up Workstation
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/cart-v03p
[email protected]om www.vivo-us.com 1-800-371-5654
SKU: CART-V03P

2 3
PACKAGE CONTENTS
A1 (x12)
M6x12
A2 (x2)
M6x30
A3 (x4)
D6 Washer
A4 (x2)
D6 Washer
A8 (x4)
Allen Key
A9 (x1)
13mm
Wrench
A10 (x1)
9/11mm
Wrench
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
ASSEMBLY STEPS
STEP 1
Slip the covers (G1) over the legs (B1, B2). Attach the arm
caps (G2) onto both legs.
STEP 2
Place leg (B2) on a at surface and attach the previously assembled leg and arms using bolts (A1)
and Allen key (A8). NOTE: Do not fully tighten screws.
G1 (x2)
Leg Cover
G5 (x2)
Locking
Caster
G6 (x2)
Knob
STEP 3
Lay the leg (B1) down on a at surface and attach the center arms (B3, B4) using bolts (A1) and the
Allen key (A8). NOTE: Do not fully tighten screws.
G7 (x1)
Le Bracket
G8 (x1)
Right Bracket
A5 (x4)
D8 Washer
A6 (x2)
M6 Nut
G2 (x2)
Arm Cap
G3 (x4)
Arm Cover
G9 (x1)
Ledge
G10 (x2)
Knob
A7 (x4)
M6x50
G4 (x2)
Caster
B5
B1
B3x2
B2
B4
B6
B1
G1x2
G2x2
B2
B1
B4
B3x2
A8
A1x2
A1x4
A1x2 A1x4
B2
B1 (x1)
Leg
B2 (x1)
Leg
B3 (x2)
Arm
B4 (x1)
Arm
B5 (x1)
Top Shelf
B6 (x1)
Lower Shelf
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF CART.
• USE TIPOVER RESTRAINT OR ANCHOR CART TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
33 lbs
(15 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Per Shelf

4 5
STEP 4
Tighten the bolts (A1) using the Allen key (A8). “L” dimensions should be equal.
STEP 5
Add the casters (G4, G5) using the wrench (A9).
STEP 6
Add the covers (G3) to the arms (B3).
STEP 7
Attach plate (G7, G8) using bolts (A2), knobs (G6),
washers (A3, A4, A5), and nuts (A6). Tighten using
Allen key and wrench (A8, A9, A10).
STEP 8
Attach the shelf (B5) to the legs using bolts
(A1) and the Allen key (A8).
STEP 9
Secure the ledge (G9) to the shelf (B5) using bolts
(A1) and the Allen key (A8).
LL
G3x4
G4x2
A9
G5x2
A3x2
A6x2
A3x2
A4x2
A2x2
A10x1
A5x2G 6x2
G8x1
G7x1
A1x2
B5
G9x1
A1x4

6 7
STEP 10
Attach the lower shelf (B6) using bolts (A7)
and the Allen key (A8).
STEP 11
Tighten the bolts (A1) on the center arm (B4) using
the Allen key (A8).
STEP 12
Adjust the shelves (B5, B6) vertically by loosening
the knobs on both sides, moving to desired
location, then tightening the knobs.
STEP 13
Turn the bottom nut counter-clockwise to loosen. Turn the top
nut clockwise to tighten. NOTE: Make sure all casters are at the
same height. If the casters are not at the same height, they can be
adjusted as shown in gure 1 and 2.
STEP 14
Adjust the angle of the top shelf using the top knobs (G6).
STEP 15
Attach the knobs (G10) to the legs (B1, B2).
A7x4
B6
1
2
G10x2
40°
0°

Last Updated: 11/12/2018
If any parts are received damaged or defective, please contact us. We are happy to
replace parts to ensure you have a fully functioning product.
For more VIVO products, check out our website at:
www.vivo-us.com.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]om www.vivo-us.com 1-800-371-5654