Vivo CART-V06A User manual

Black Mobile Computer Workstation
Follow along step-by-step with our video walk through by scanning
the QR code with your mobile device or by following the product
link: vivo-us.com/products/cart-v06a
Instruction Manual
SKU: CART-V06A
ASSEMBLY VIDEO AVAILABLE:
[email protected]om www.vivo-us.com 309-278-5303

Contact Us First!
PERSONABLE CUSTOMER SUPPORT
Our friendly product support team is here to help!
DO NOT RETURN ITEM
We’re Here for You!
Missing a Part?
Our customer-minded support team is here for YOU,
Monday-Friday 7am-7pm CST.
We oer immediate assistance with rapid response times
from customer service agents and product techncians to
help you every step of the way!
Monday-Friday
Chat Us:
www.vivo-us.com
Give us a Call:
309-278-5303
Email Us:
[email protected]om
If any parts are received damaged / defective OR you are
missing a part, please reach out to us within 30 days of
product delivery to have it replaced at no cost.
We are happy to replace parts to ensure you have a fully
functioning product
7AM - 7PM

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a qualified
technician. Check carefully to make sure there are no missing
or defective parts. Improper installation may cause damage or
serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We
cannot be liable for damage or injury caused by improper mounting, incorrect
assembly or inappropriate use.
PRE-ASSEMBLY | BEFORE YOU BEGIN
Product Warranty
Returns | Product Didn’t Work Out?
For the most up to date details on your product’s warranty, please visit
the product’s listing on our website or reach out to customer support.
vivo-us.com/products/cart-v06a
We oer a hassle-free 30 day return on all products. Contact customer
support at 309-278-5303 or [email protected]om. Please note: For items
ordered in error or no longer needed, the return shipping charges will
be at the buyer’s expense.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS
REQUIRED.
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP
PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART
OF TV OR TV CART.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK
OF TIPOVER.
TIPOVER WARNING
WEIGHT CAPACITY
DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury.
33lbs
(15kg)
!
DESKTOP
4.4lbs
(2kg)
TRAY

4
PACKAGE CONTENTS
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
A (x1)
Desktop
B(x2)
Shelf Bracket C(x1)
Support
Plate
D (x1)
Keyboard
Shelf
Please consult the parts list below and ensure you have everything you need to assemble
your product. If parts are missing or damaged, please contact us.
Phillips Screwdriver
|
TOOLS NEEDED:
DIFFICULTY LEVEL
E (x2)
Telescopic
Pole
G(x1)
Base H(x4)
Locking
Caster
S-A (x19)
M5x12mm Screw
S-B (x4)
M5x20mm Screw
S-C (x9)
M6x12mm Screw
S-D (x6)
M6x15mm Screw
S-E (x6)
M5x12mm
Flathead Screw
T-A (x1)
4mm Allen
Wrench
T-B (x1)
Wrench
F (x1)
Telescopic Pole
with Release
Lever

5
STEP 1: Install Casters
Screw Locking Casters (H) into the Base (F) and tighten with the Wrench (T-B).
ASSEMBLY STEPS
STEP 2: Install Poles
Assemble Telescopic Pole with Release Lever (F) to the center of the Base (G) using x3
M6x12 Screws (S-C). Assemble Telescopic Poles (E) to sides of the Base (G) using x6 M6x15
Screws (S-D). Tighten all bolts with the 4mm Allen Wrench (T-A).
G
Base
H
Locking Caster
T-B
Wrench
E
Telescopic Pole
S-C
M6x12 Screw
S-D
M6x15 Screw
T-A
4mm Allen Wrench
G
H
T-A
G
F
S-C
S-D
E
F
Pole w/ Release Lever

6
A
C
S-A
STEP 3: Install Support Plate
Install Support Plate (C) to Poles (E) using x6 M6x12 Screws (S-C) and tighten with the 4mm
Allen Wrench (T-A).
C
Support Plate
T-A
4mm Allen Wrench
STEP 4: Attach Desktop
Assemble Desktop (A) to Support Plate (C) using x10 M5x12 Screws (S-A). Secure release lever
handle to Desktop (A) with x3 M5x12 Screws (S-A). Tighten with a Phillips screwdriver.
A
Desktop
S-A
M5x12 Screw
C
T-A
S-C
S-C
M6x12 Screw
E

7
Install Keyboard Shelf Brackets (B) to Desktop using x6 M5x12 Screws (S-A), making sure
the curved slots are facing towards the front. Tighten screws with a Phillips screwdriver.
Secure center pole to Desktop (A) with x4 M5x20 Screws (S-B) and tighten with a Phillips
screwdriver.
STEP 5: Secure Desktop
STEP 6: Place Items on Desk Riser
S-B
M5x20 Screw
B
Shelf Bracket
S-A
M5x12 Screw
A
S-B
B
S-A

8
Mount Keyboard Shelf (D) to brackets with x6 M5x12 Flathead Screws (S-E) and tighten with a
Phillips screwdriver.
STEP 7: Install Keyboard Shelf
S-E
M5x12 Flathead
Screw
D
Keyboard Shelf
Ensure the handle is correctly pulling on the release cable. If the desk will not lock, the cable
tension is too high and will need to be decreased. If the desk will not raise or lower, the cable
tension is too low and will need to be increased.
Increase cable tension: Loosen both nuts holding the cable housing to the mounting bracket,
pull the cable housing away from the handle to increase the tension. Then re-tighten the two
nuts.
Decrease cable tension: Loosen both nuts holding the cable housing to the mounting bracket,
push the cable housing towards the handle to decrease the tension. Then re-tighten the two nuts.
STEP 8: Check Handle
D
S-E
Loosen/ Tighten nuts
to adjust
Cable Housing
Mounting Bracket
Handle

9
To adjust height, li the release lever handle and move the desktop up or down.
STEP 9: Adjust Height

10
3
CHECK OUT OTHER GREAT PRODUCTS FROM
EXPLORE MORE AT VIVO-US.COM
WHO WE ARE
VIVO is more than a brand of ergonomic oice furniture. We are a team of
creative and innovative indivuduals working together to oer high quality,
aordable ergonomic solutions. We think and work outside of the box to serve
you, our customer, to the best of our abilitiy.
We oer a wide array of home & oice products
to fit your needs. From height adjustable desks to
monitor mounts to keyboard trays and more!
HEIGHT
ADJUSTABLE DESKS
MONITOR
MOUNTS
SPEAKER MOUNTS
& STANDS
We oer electric & manual
crank standing desks,
corner frames, desk & top
combos, and more!
From single monitor
mounts to hex mount,
gromment or clamp-ons,
we’ve got a mounting
solution for your setup.
Whether you’re mounting
a soundbar or surround
sound system, we’ve got
a mounting solution to fit
your needs.

11
Need Assistance?
Personable Customer Support | Mon-Fri 7am-7pm
We Would Love to Help!
We oer immediate assistance with rapid response times from
customer service agents and product techncians to help you every
step of the way!
Call Us: 309-278-5303
Average Resolution Time: 5m 4s
Chat Us: www.vivo-us.com
Average Resolution Time: < 15m
Email Us: [email protected]om
Average Resolution Time: 1HR 8M
23% within < 15m
38% within < 30m
61% within < 1hr
83% within <2hr
92% within < 3hr

LAST UPDATED: 07/19/2022
REV1.1LF
Ready to share that new amazing
setup? Want to brag about that
amazing new ergonomic solution?
Tag us in your photo!
FOR MORE GREAT VIVO PRODUCTS,
CHECK OUT OUR WEBSITE AT: WWW.VIVO-US.COM
LOVE YOUR NEW VIVO SETUP?
VIVO-us @vivo_us