Vivo CART-V02DB User manual

Black Mobile Computer Workstation
Follow along step-by-step with our video walk through by scanning
the QR code with your mobile device or by following the product
link: vivo-us.com/products/cart-v02db
Instruction Manual
SKU: CART-V02DB
ASSEMBLY VIDEO AVAILABLE:
[email protected]om www.vivo-us.com 309-278-5303

Contact Us First!
PERSONABLE CUSTOMER SUPPORT
Our friendly product support team is here to help!
DO NOT RETURN ITEM
We’re Here for You!
Missing a Part?
Our customer-minded support team is here for YOU,
Monday-Friday 7am-7pm CST.
We oer immediate assistance with rapid response times
from customer service agents and product techncians to
help you every step of the way!
Monday-Friday
Chat Us:
www.vivo-us.com
Give us a Call:
309-278-5303
Email Us:
[email protected]om
If any parts are received damaged / defective OR you are
missing a part, please reach out to us within 30 days of
product delivery to have it replaced at no cost.
We are happy to replace parts to ensure you have a fully
functioning product
7AM - 7PM

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a qualified
technician. Check carefully to make sure there are no missing
or defective parts. Improper installation may cause damage or
serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We
cannot be liable for damage or injury caused by improper mounting, incorrect
assembly or inappropriate use.
PRE-ASSEMBLY | BEFORE YOU BEGIN
Product Warranty
Returns | Product Didn’t Work Out?
For the most up to date details on your product’s warranty, please visit
the product’s listing on our website or reach out to customer support.
vivo-us.com/products/cart-v02db
We oer a hassle-free 30 day return on all products. Contact customer
support at 309-278-5303 or [email protected]om. Please note: For items
ordered in error or no longer needed, the return shipping charges will
be at the buyer’s expense.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS
REQUIRED.
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP
PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART
OF TV OR TV CART.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK
OF TIPOVER.
TIPOVER WARNING
WEIGHT CAPACITY
DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury.
33lbs
(15kg)
!
PER SHELF

4
PACKAGE CONTENTS
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
A (x1)
Base
B(x1)
Le Upright
C(x1)
Right Upright
D (x1)
Crossbar
Please consult the parts list below and ensure you have everything you need to assemble
your product. If parts are missing or damaged, please contact us.
Phillips Screwdriver
|
TOOLS NEEDED:
DIFFICULTY LEVEL
E (x2)
Shelf Bracket
G(x2)
Locking Caster
H(x2)
Plastic Insert
S-A (x4)
M6x20mm Screw
S-B (x18)
M6x30mm Screw
S-C (x2)
M6x35mm Screw
T-A (x1)
4mm Allen Wrench
T-B (x1)
Wrench
F (x2)
Caster
I (x1)
Bottom Shelf
K(x1)
Front Shelf
L (x1)
Rear Shelf
J (x1)
Middle Shelf

5
STEP 1: Install Casters
Thread Casters (F) and Locking Casters (G) into Base (A) using Wrench (T-B).
ASSEMBLY STEPS
F
GA
T-B
G (x2)
Locking Caster
F (x2)
Caster
A (x1)
Base
T-B (x1)
Wrench

6
STEP 2: Install Inserts
Place Plastic Inserts (H) inside of Base (A).
NOTE: Lock Locking Casters (G) to prevent rolling during assembly.
H
A
G
H(x2)
Plastic Insert

7
Assemble Le Upright (B) and Right Upright (C) to Base (A) using M6x20mm Screws (S-A) and 4mm Allen
Wrench (T-A).
STEP 3: Assemble Uprights
B
C
A
S-A
T-A
B(x1)
Le Upright
C(x1)
Right Upright
S-A (x4)
M6x20mm Screw
T-A (x1)
4mm Allen Wrench

8
I
A
S-B T-A
Assemble the Bottom Shelf (I) to Base (A) using M6x30mm Screws (S-B) and 4mm Allen Wrench (T-A).
STEP 4: Install Bottom Shelf
Secure Crossbar (D) to Le Upright (B) and Right Upright (C) using M6x30mm Screws (S-B) and 4mm Allen
Wrench (T-A).
STEP 5: Mount Crossbar
D
BC
S-B
T-A
T-A (x1)
4mm Allen Wrench
S-B (x4)
M6x30mm Screw
I (x1)
Bottom Shelf
D (x1)
Crossbar
T-A (x1)
4mm Allen Wrench
S-B (x2)
M6x30mm Screw

9
E
B
C
S-B
T-A
Attach Shelf Brackets (E) to Le Upright (B) and Right Upright (C) using M6x30mm Screws (S-B) and
4mm Allen wrench (T-A).
NOTE: Make sure to use the first two holes on Shelf Brackets (E).
STEP 6: Assemble Shelf Brackets
S-B (x4)
M6x30mm Screw
T-A (x1)
4mm Allen Wrench
E (x2)
Shelf Bracket

10
Assemble Middle Shelf (J) to Crossbar (D) using M6x35mm Screws (S-C) and 4mm Allen Wrench (T-A).
STEP 7: Secure Middle Shelf
J
D
S-C
T-A
S-C (x2)
M6x35mm Screw
J (x1)
Middle Shelf
T-A (x1)
4mm Allen Wrench