Vivo CHAIR-BIKE1B User manual

Black Height Adjustable Deskside Bike
Instruction Manual
SKU: CHAIR-BIKE1B
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/chair-bike1b
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
Base
B(x1)
Seat
C(x1)
Back Support
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury. 220lbs
(100kg)
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Use this product on a stable, level surface. Do not use this product for any purpose that
is not explicitly specified in this manual. Do not exceed weight capacity. Do not stand on this product. We cannot be
liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
ASSEMBLY STEPS
STEP 1
Unfold the rear feet and pedals of Base (A). They should click into place.
S-A (x6)
M8x20
Screw
S-B (x6)
M8
Washer
T-A (x1)
5mm Allen
Wrench
Rear Feet
Le Pedal

3
STEP 2
Raise the handle underneath the seat plate on Base (A) to raise the seat post. Mount Seat (B) to Base
(A) using M8x20 Screws (S-A) with M8 Washers (S-B). Tighten using 5mm Allen Wrench (T-A).
T-A
S-A
S-B
Plastic
Handle

4
Insert Back Support (C) into the seat post of Base (A), just under Seat (B). Secure using M8x20 Screws
(S-A) and M8 Washers (S-B). Tighten using 5mm Allen Wrench (T-A).
STEP 3
S-B
S-A
T-A
C
B
A

5
DISPLAY OPERATION
The LCD desplay requires two AA batteries (not included). Use the key button to cycle through the LCD
display and select a function.
OPERATION
TENSION ADJUSTMENT
Use governor wheel located on top of Base (A) to increase or decrease resistance.
SEAT HEIGHT ADJUSTMENT
The seat height can be adjusted by pulling up on the lever located under Seat (B).
BPlastic
Handle
Plastic
Handle
Governor Handwheel
LCD Display
Key Button Two AA
Batteries 1.5V

6
SEAT POSITION ADJUSTMENT
To adjust the seat assembly forward or backward, loosen M8x20 Screws (S-A) under Seat (B) using
5mm Allen Wrench (T-A). Once the seat assembly is in the desired position, retighten M8x20 Screws
(S-A) using 5mm Allen Wrench (T-A).
S-A
T-A

7
STORAGE
For storage, use 5mm Allen Wrench (T-A) to press in pins located on the underside of Base (A) and
rotate the feet towards the base.
T-A
A
Limit Round Pin
Rear Feet

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
LAST UPDATED: 06/03/2021
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303