Vivo MOUNT-KB05GP User manual

Black Clamp-on Height Adjustable Keyboard Tray
with RGB Pad
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-kb05gp
SKU: MOUNT-KB05GP
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
ASSEMBLY STEPS
STEP 1
STEP 2
Assemble the Keyboard Tray (A) using Connecting Plates (B) and M5x12 Flat Head Screws (S-C), and
tighten with a Phillips screwdriver.
Attach the Keyboard Stop (C) to the back of Keyboard Tray (A) using M5x12 Flat Head Screws (S-C).
Tighten with a Phillips screwdriver.
PACKAGE CONTENTS
TOOLS NEEDED
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualied technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specied in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
A(x1)
Keyboard Tray
B(x2)
Connecting Plate
D(x2)
Support Bracket
F (x2)
Clamp
C(x1)
Keyboard Stop
E(x2)
Slider Bracket
G(x2)
Pad
H(x1)
Mouse Pad
I(x1)
Power Cable
S-A (x6)
M4x7mm Flat
Head Screw
S-B (x8)
M5x12mm
Screw
S-C (x12)
M5x12mm Flat
Head Screw
S-D (x6)
M5x8mm Flat
Head Screw
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
A
B
S-C
C
A
S-C

3
STEP 3
STEP 5
STEP 7
STEP 4
STEP 6
DDeesskkttoopp
STEP 8
DDeesskkttoopp
Assemble Slider Brackets (E) to Support Brackets
(D) using M4x7mm Flat Head Screws
(S-A). Tighten with a Phillips screwdriver.
E
D
S-A
Assemble Slider Brackets (E) to Keyboard Tray (A)
using M5x12mm Screws (S-B), and tighten with
a Phillips screwdriver. The slider brackets should
protrude from the back of the keyboard tray
EA
S-B
Assemble Clamps (F) to Support Brackets (D) at
desired height using M5x8mm Flat Head Screws
(S-D). Tighten with a Phillips screwdriver.
S-D
D
F
Place Pads (G) on the underside of each Clamp
(F). Place assembled keyboard mount on the
edge of desktop and tighten Clamps (F).
F
G
Place Mouse Pad (H) on Keyboard Tray (A). Plug
Power Cable (I) into Mouse Pad (H) and plug the
other end into a 5V USB power supply.
H
A
I
To ensure the keyboard tray assembly is level, do
not over-tighten Clamps (F). Slide Keyboard Tray
(A) forward/back to desired position.

LAST UPDATED: 12/21/2021
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303