Vivo DESK-V000VO User manual

[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
Oak Desk Riser
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v000vo
SKU: DESK-V000VO

2
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
33lbs
14.97kg
PACKAGE CONTENTS
A (x1)
Desk Riser
B (x2)
Foot Extension
S-C (x2)
Ziptie
D (x1)
Keyboard
Tray
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
S-B (x1)
Cable Clip
S-A (x10)
M5x10
C (x1)
Keyboard
Brackets
Scissors

3
STEP 2
Flip Desk Riser (A) upside down, then attach Feet Extensions (B) to the frame using
M5x10mm Screws (S-A).
ASSEMBLY STEPS
STEP 1
Carefully remove the Desk Riser (A) from the packaging.
WARNING: Impact Hazard!
Moving Parts can Crush and Cut!
A
A
S-A

4
STEP 3
Press the handles on each side and li Desk Riser (A).
STEP 4
Mount Keyboard Brackets (C) to Keyboard Tray (D) using M5x10mm screws (S-A).
S-A
DC
A

5
STEP 5
STEP 6
Place monitor, laptop and other items on desk surface.
Hang assembled keyboard tray onto pre-installed knobs, and tighten knobs to secure.
NOTE: Make sure the keyboard brackets are curving towards the user, not towards the
inside of the desk.

6
3
STEP 7
Attach Cable Clip (S-B) to desk to manage keyboard and mouse cables.
STEP 8
Manage cables using Zip Ties (S-C).
S-B
S-C

7
3
STEP 9
If locks are not releasing properly to change desk height, adjust the position of the black
tube containing the steel release cable. Turn the nuts at the end of the tube just behind the
handle as shown, moving the tube away from the handle until the cable once again has
proper tension, then tighten the nuts.

LAST UPDATED: 07/14/2021
REV1.2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303