Vivo DESK-V100M User manual

Crank Height Adjustable 55” Desk - Black
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v100m
SKU: DESK-V100M
[email protected]om www.vivo-us.com 309-278-5303

2
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
WARNING!
TOOLS NEEDED
Phillips
Screwdriver
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
88lbs
39.92kg
Level
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x1)
Desktop
B (x1)
Sync Rod
D (x1)
Crossbar
E (x1)
Crank
S-A (x4)
M8x10 Hex
Head Screw
S-C (x1)
Allen Wrench
C (x2)
Liing Column
S-B (x6)
M6x30 Philips
Head Screw

3
STEP 2
Insert the sync rod (B) into the hex socket on the liing column. Place the second column (C) onto the
desk board and insert the other end of the sync rod into the column.
ASSEMBLY STEPS
STEP 1
_
`
Place desk board (A) upside down on a flat surface. Assemble one liing column (C) to the desk board
using x3 Phillips head screws (S-B) and tighten with a screwdriver.

4
STEP 3
Secure the second liing column to the desk board using x3 Phillips head screws (S-B) and tighten
with a screwdriver.
S-B
Phillips
Screwdriver

5
STEP 4
Assemble the crossbar (D) to the back of the liing columns using hex head screws (S-A) and tighten
with the Allen wrench (S-C).
D