Vivo STAND-TV12H User manual

Silver Mobile Dual TV Cart
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv12h
SKU: STAND-TV12H
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
Base
B(x4)
Wheel Caster
C(x2)
Universal
Plate
I (x2)
Top Cover
J x2)
Connector
K(x1)
DVD Shelf
L (x1)
Connecting
Plate
H(x2)
Right Adapter
Bracket
E (x1)
Le Column
F (x1)
Right
Column
G (x2)
Le Adapter
Bracket
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
N (x2)
Fixing Plate
M(x1)
Camera Shelf
M-G (x4)
Small Spacer
M-A (x4)
M6x14mm
Screw
M-B (x4)
M8x16mm
Screw
M-D (x4)
M8x35mm
Screw
M-E (x4)
M8x35mm
Screw
M-C (x4)
M6x30mm
Screw
D (x2)
Plastic Handle
M-H (x4)
Large Spacer
O (x1)
Support Bar
P x2)
Knob
S-A (x4)
M6x15mm
Screw
S-B (x2)
M6x25mm
Screw
S-D (x3)
M4x6mm
Flathead Screw
S-C (x2)
M6x25mm
Screw w/Washer
S-E (x2)
M4x6mm Dome
Head Screw
S-F x2)
M6x25mm
Screw
S-G (x10)
M6x14mm
Screw
S-H (x8)
M8x25mm
Screw
S-J (x2)
Spacer
S-I (x2)
M6x25
S-K (x2)
M6 Washer
T-A x1)
Allen Wrench
T-B x1)
Wrench
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
110lbs
(50kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
Screw Casters (B) into underside of Base (A). Adjust Casters (B) to sit flat on surface if needed, and
tighten nuts using wrench (T-B) as shown.
STEP 2
Loosen screws on each side of Columns (E, F) using Allen Wrench (T-A) to adjust height to desired level,
then tighten. (CAUTION: Hold inner column when loosening for adjustment). Ensure both columns are
at the same height using the height indicators as guides.
A
B
B1 B1
F
PER SCREEN
11lbs
(5kg)
DVD SHELF
TOOLS NEEDED
11lbs
(5kg)
CAMERA SHELF
T-B
T-A T-A

4
STEP 2 (Continued)
Place the Columns (E, F) into the cutouts in the Base (A). Slide the Plastic Handles (D) over the
inner columns and press firmly in place. NOTE: Lock the casters in place to prevent movement
during assembly. Secure columns using M8x25mm Screws (S-H) and tighten with Allen Wrench
(T-A).
Slide Connectors (J) onto back of Universal Plates (C) as shown and secure with M6x15mm
Screws (S-A). Assemble Universal Plates (C) with Fixing Plates (N) and M6x15mm Screws (S-G).
Attach the Connectors (J) on the Universal Plate
(C) to the columns with M6x14mm Screws (S-G).
Attach Top Covers (I) to the top of the columns.
Secure with M6x25mm Screw w/Washer (S-C) into
the back of each column.
D
EF
B1
X
S-H
T-A
S-A
S-G
S-C
S-G

5
STEP 3 (Continued)
Attach the DVD Shelf (K) to the Support
Bar (O) with M6x14mm Screws (S-G),
M6x25mm Screw (S-B) and Knobs (P).
Attach the Support Bar (O) with DVD shelf
(K) to the support blocks on columns
with M6x25mm (S-B) and Allen Wrench
(T-A). Adjust the Shelf (K) to the desired
height using the Allen Wrench (T-A)
before installing the displays to the stand.
STEP 4
Install Adapter Brackets (G, H) to back of each TV using appropriate Screws (M-A thru M-D), M8
Washers (M-E), and Spacers (M-F, M-G).
P
O
S-G
S-B
S-B
T-A
T-A
T-A
H
G

6
STEP 5
STEP 6
Manage cables using the cable grommets in the columns.
Hang TV onto the Universal Plate (C). Turn the bolts on the underside of the brackets counter-
clockwise to lock. Turn the bolts clockwise to unlock and remove the displays. Padlocks (not included)
can be used to prevent the displays from being stolen.
C

7
STEP 8
Attach the Connecting Plate (L) to the center holes in Fixing Plates (N) using M6x25mm Phillips Head
Screws (S-B), M6 washers (S-K) and Spacers (S-J). Adjust the height of the camera shelf and tighten
screws.
Attach the Camera Shelf (M) to the Connecting Plate (L) using M4x6mm Flathead Screws (S-D) on top
and M4x6mm Dome Head Screws (S-E) in back.
STEP 7
L
M
S-D
S-E
S-B S-K
S-J

LAST UPDATED: 02/08/2023
REV2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303