Vivo CART-V01BK User manual

Black Exercise Bike Cart
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/cart-v01bk
SKU: CART-V01BK
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
C (x2)
Foot
D (x2)
Locking Caster
E (x2)
Caster
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF CART.
• USE TIPOVER RESTRAINT OR ANCHOR CART TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
ASSEMBLY STEPS
STEP 1
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Decide whether you want the Locking Casters (D) to be in the front or rear of the cart. The front
of the Feet (C) are the holes furthest away from the foot mounting plate. Screw the Casters (D,
E) into the Feet (C) using the wrench (T-A).
F (x1)
Desktop
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
A (x2)
Support Column
Set
B (x1)
Cross Bar
S-C (x8)
M5x12 Screw
T-A (x1)
Wrench
T-B (x1)
4mm Allen
Wrench
S-A (x4)
M6x25 Screw
S-B (x8)
M6x12 Screw
DD
EE
C
T-A
Foot
Mounting
Plate

3
Attach the Cross Bar (B) to each of the Support
Columns (A) using M6x25 Screws (S-A). Note that
the larger hole in the Cross Bar (B) should be facing
upwards. Tighten with the 4mm Allen Wrench (T-B).
STEP 2
With the column assembly flipped upside
down, secure the Feet (C) to the Support
Columns (A) using M6x12 Screws (S-B).
Tighten with the the 4mm Allen Wrench (T-B).
Note: make sure the longer end of the foot (C)
is on the same side as the longer end of the
Support Columns (A).
Attach the Support Columns (A) to the Desktop
(F) using M5x12 Screws (S-C). Tighten using the
Philips end of the 4mm Allen Wrench (T-B) or a
Phillips screwdriver.
STEP 4
Loosen the levers on the Support Columns (A)
to adjust the height of the desktop.
Front
Larger Hole
A
S-A
T-B
A
T-B
S-B
C
S-C
T-B
F
A
STEP 3
STEP 5
Front
B

LAST UPDATED: 07/06/2021
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303