Vivo STAND-TV03E2 User manual

Dual Screen Mobile TV Cart
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv03e2
SKU: STAND-TV03E2
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
PACKAGE CONTENTS
A (x2)
Long Foot
B(x2)
Short Foot
C(x1)
Base
I (x4)
Caster
H(x4)
Pole Cover
D (x1)
Base Cover
E (x2)
Bottom Pole
F (x2)
Top Pole
G (x2)
Pole Connector
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
M-C (x8)
M6x20mm
Screw
M-H (x8)
M4 Washer
M-I (x24)
M6 Washer
M-J (x8)
M8 Washer
J (x4)
Universal Plate
Connector
S-A (x8)
M6x60mm
Screw
S-B (x4)
M6 Socket
Plate
S-C (x18)
M6x10mm
Screw
S-D (x2)
M5x6mm Set
Screw
L (x2)
Universal Plate
M (x2)
Right VESA Bracket
N (x2)
Le VESA Bracket
K (x4)
Plastic Spacer
M-A (x8)
M4x12mm
Screw
M-B (x8)
M4x30mm
Screw
M-D (x8)
M6x35mm
Screw
M-E (x8)
M8x20mm
Screw
M-F (x8)
M8x35mm
Screw
M-G (x8)
M8x45mm
Screw
M-K (x16)
M4 Spacer
(20mm)
M-L (x16)
M6/8 Spacer
(20mm)
M-M (x16)
M6/8 Spacer
(5mm)
T-A (x1)
2.5mm Allen
Wrench
T-B (x1)
4mm Allen
Wrench
T-C (x1)
5mm Allen
Wrench
T-D (x1)
Wrench
T-E (x1)
Level

3
Assemble Long Feet (A) and Short Feet (B) to
Base (C) using M6x60mm Screws (S-A) and
M6 Socket Plates (S-B). Tighten using 5mm
Allen Wrench (T-C).
NOTE: Make sure Long Feet (A) are in the
front of Base (C) and Short Feet (B) are in
the back.
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
Phillips
Screwdriver
Attach Casters (I) to Long Feet (A) and Short
Feet (B) using Wrench (T-D).
STEP 2
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Front
Bac k
70 lbs
(31.75 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
EACH MOUNT
I
A
B
T-D
A
BC
S-A
S-B
T-C
I

4
STEP 3
Thread Pole Connectors (G) onto bottom Poles (E). Carefully thread the pole connector in perfectly
straight to avoid cross-threading. If you feel resistance, back the connector out and restart. Once you
are certain the connector is going in straight, use additional force to tighten. Assemble Bottom Poles
(E) to Base (C) using M6x10mm Screws (S-C) in the back.
NOTE: Pole Connector (G) threads are very ne and could be sharp. It may be helpful to grip Pole
Connector (G) with a cloth or towel to produce suicient force in order to thread into the poles.
STEP 4
Slide Base Cover (D) over Bottom Poles (E) onto
Base (C).
Thread Top Poles (F) onto Pole Connectors (G) and
insert the Pole Covers (H) into the top.
STEP 5
Remove the rubber grommets on
Bottom Poles (E) before
assembling Base Cover (D).
G
E
C
S-C
D
E
C
F
G
H

5
STEP 6
Slide Universal Plate Connectors (J) and Plastic
Spacers (K) onto Top Poles (F) and tighten the
set screw using 2.5mm Allen Wrench (T-A).
Assemble Universal Plates (L) to Universal Plate
Connectors (J) with M6x10mm Screws (S-C) and
M6 Washers (M-I). Tighten using 4mm Allen Wrench
(T-B).
STEP 8
Clip Level (T-E) onto Universal Plate (L). Adjust
the level of Universal Plate (L) by loosening
the set screw in the back of Universal Plate
Connectors (J) using 2.5mm Allen Wrench
(T-A). Tighten the set screws again once you’ve
reached desired height and level.
Secure Right VESA Bracket (M) and Le VESA Bracket
(N) to the back of your television using Screws (M-A
through M-G) and Washers (M-H through M-J),
depending on the size of the mounting holes on the
television. For curved or recessed TVs, Spacers (M-K
through M-M) may be required.
STEP 7
STEP 9
J
K
F
T-A
L
J
S-C
M-I
T-B
T-E L
J
T-A
M
N
M-A through M-G
M-H through M-J
M-K through M-M

6
STEP 10
Assemble VESA Brackets (M, N) to Universal Plate (L). Tighten the security screws on the bottom of
VESA Brackets (M, N) to secure the television to the stand.
STEP 11
If additional leveling and height adjustment is required aer television is attached, repeat step 8.
M
N
L
Security Screws
T-A

7
STEP 13
Li Base Cover (D) o of Base (C) and insert M5x6mm Set Screws (S-D) into the inside holes of Base (C).
STEP 12
For wire management, cables can be run through the tops of the Pole Covers (H) and through the
cables management slots in the back of Bottom Poles (E) down through Base (C).
H
E
C
D
C
S-D

LAST UPDATED: 05/23/2022
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303