Vivo STAND-TV09 User manual

Silver Mobile TV Cart
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv09
SKU: STAND-TV09
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
Mount
B(x1)
Upper
Column
C(x1)
Lower
Column
I (x1)
Le Cover
J x1)
Right Cover
K (x1)
Support
Plate
H(x1)
Column Cover
E (x2)
Leg
F (x1)
Shelf
G (x2)
VESA Bracket
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
NOTE: SOMEHARDWARE INCLUDED MAY NOT BE USED
M (x4)
Caster
N (x1)
Grommet
Cover
L(x1)
Handle
T-B (x1)
6mm Allen
Wrench
M-D (x4)
M8x35mm
Screw
M-E (x4)
M8 Washer
M-G (x4)
Large Spacer
M-F (x4)
Small Spacer
D (x1)
Base
T-C (x1)
Wrench
S-A x2)
M6x8mm
Screw
S-B (x4)
M6x12mm
Screw
S-C (x4)
M6x16mm
Screw
S-E (x4)
M8x30mm
Screw
S-D (x4)
M8x20mm
Screw
S-F (x4)
M6x40mm
Screw
M-A x4)
M6x14mm
Screw
M-B (x4)
M8x16mm
Screw
M-C (x4)
M6x30mm
Screw
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
T-A (x1)
5mm Allen
Wrench

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
Phillips
Screwdriver
Slide Base (D) over Legs (E) and fasten using M6x16mm Screws (S-C), M6x40mm Screws (S-F),
and 5mm Allen Wrench (T-A).
Snap Le and Right Covers (I, J) onto Base (D), making sure the arrows are facing towards the front.
TV DVD
110 LBS
(50kg)
11 LBS
(5kg)
S-C
D
T-A
E
S-F
I J
D

4
STEP 2
STEP 3
Press down the lever on Casters (M) to engage the lock. Screw Casters (M) onto Legs (E).
Lay Lower Column (C) on an elevated surface. Attach the base assembly to Lower Column (C)
using Support Plate (K), M8x30mm Screws (S-E), and 6mm Allen Wrench (T-B).
Note: During installation, ensure the wider ends of the components are all facing towards the
front of the base.
Use to Wrench (T-C) to adjust Caster height if needed.
Note: Lock casters
before installation
ME
M
T-C
C
T-B
S-E
K

5
STEP 4
Loosen screws on Shelf (F) using 5mm Allen Wrench (T-A) to create a gap 4mm or larger between
the shelf and metal plates. Slide Shelf (F) onto Lower Column (C), aligning the metal plates within
the slots. Adjust the Shelf to desired height and tighten screws uning 5mm Allen Wrench (T-A).
T-A
C
T-A
F

6
STEP 5
Attach Upper Column (B) to Lower Column (C) using M8x20mm Screws (S-D) and 6mm Allen
Wrench (T-B). Slide Handle (L) onto Upper Column (B), ensure it fully covers the jointed section.
Press Grommet Cover (N) into the cable access hole on Upper Column (B).
B
S-D
T-B
L
N
B
C
C

7
STEP 6
Loosen the screw on Mount (A) using 5mm Allen Wrench (T-A) to create a gap 4mm or larger
between the mount and metal plates. Slide Mount (A) onto Upper Column (B) with the metal plates
within the slots.
A
4mm
B
T-A
Adjust to desired height and tighten screws uning 5mm Allen Wrench (T-A).
Install Column Cover (H) onto Upper Column (B).
T-A
H
B

8
STEP 7
STEP 8
Attach VESA Brackets (G) to back of TV using appropriate screws (M-A thru M-D) and M8 Washers
(M-E). If needed, Spacers (M-F, M-G) are provided.
Hang TV with VESA Brackets (G) onto Mount (A). Adjust the TV so it is positioned in the center of the
Mount and fasten using M6x12mm Screws (S-B) and a Phillips screwdriver.
S-B
G
A
G
M-A
M-B M-C
M-D
M-E M-E
M-F
M-G

9
Adjust as Desired
LANDSCAPE ORIENTATION:
Ensure the arrow on Mount (A) is facing up. Lock the position using M6x8mm Screws (S-A) and a
Phillips screwdriver.
PORTRAIT ORIENTATION:
Rotate Mount (A) so the arrow is pointing sideways. Lock the position using M6x8mm Screws (S-A)
and a Phillips screwdriver.
Loosen the Knobs (A1) on Mount (A) to adjust the tilt of the TV. Retighten to secure.
A
S-A
S-A
A
A
A1

10
Cable Managment
Use provided cable management holes on assembled stand to route cords. Store Allen
Wrenches (T-A, T-B) in Handle (L) for future adjustments.
T-B T-A
L

11
[ THIS PAGE INTENTIONALLY LEFT BLANK ]

LAST UPDATED: 05/11/2023
REV3
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303