Vivo STAND-TV03E/W User manual

Mobile TV Cart
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv03e
SKU: STAND-TV03E/W
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
TOOLS NEEDED
Phillips
Screwdriver
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT
TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV
CART.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
110 lbs
(50 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury. 10 lbs
(4.5 kg)
CART SHELF

3
PACKAGE CONTENTS
A (x2)
Long Leg
B (x2)
Short Leg
C (x1)
Base w/Cover
D (x2)
Rubber Sleeves
E (x2)
Lower Pole
F (x2)
Upper Pole
G (x2)
Pole
Connector
H (x4)
Pole Cap
I (x4)
Caster
J (x2)
Plastic Pad
K (x2)
Adapter
Bracket
L (x4)
Threaded
Plate
M (x1)
Shelf
N (x2)
Shelf
Support
O (x1)
Mounting
Plate
P (x1)
VESA
Bracket Set
S-A (x8)
M6x60mm
Screw
S-B (x14)
M6x10mm
Screw
S-C (x2)
M5x6mm
Screw
S-D (x4)
M4x6mm
Screw
M-A (x4)
M4x12mm
Screw
M-B (x4)
M4x30mm
Screw
M-C (x4)
M6x20mm
Screw
M-D (x4)
M6x35mm
Screw
M-E (x4)
M8x20mm
Screw
M-F (x4)
M8x35mm
Screw
M-G (x4)
M8x50mm
Screw
M-H (x4)
M4 Washer
M-I (x12)
M6 Washer
M-J (x4)
M8 Washer
M-K (x4)
M6 Spacer
M-L (x4)
Large M8
Spacer
M-M (x8)
Small M8
Spacer
T-A (x1)
2.5mm Allen
Wrench
T-E (x1)
Level
T-B (x1)
4mm Allen
Wrench
T-C (x1)
5mm Allen
Wrench
T-D (x1)
Wrench
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

4
ASSEMBLY STEPS
STEP 1
STEP 2
Attach Casters (I) to Long and Short Legs (A, B) using Wrench (T-D).
Separate Base w/Cover (C) into Base (C1) and Cover (C2).
Attach Long and Short Legs (A, B) to Base (C1) using M6x60mm Screws (S-A), Threaded Plates (L),
and 5mm Allen Wrench (T-C).
NOTE: Short Legs (B) should be on the same
side as the large holes on on Base (C), indicated
by the arrow above.
A
T-D
I
B
S-A
C1
A
B
L
Back
Front
T-C
C
C2
C1

5
STEP 3
Thread Pole Connecters (G) onto Lower Poles (E).
Insert Lower Poles (E) into Base (C) and secure using M6x10mm Screws (S-B) and 4mm Allen
Wrench (T-B).
E
G
S-B
T-B

6
STEP 4
Slide Cover (C2) over Lower Poles (E) and onto Base (C). To ensure a correct fit, make sure side with
logo is facing the front. Place Rubber Sleeves (D) into the holes on the backside Lower Poles (E).
Thread Upper Poles (F) into Pole Connectors (G). Assemble Pole Caps (H) and place onto of
Upper Poles (F).
D
E
C1
F
H
E
G
Back
Front

7
STEP 5
Hold Plastic Pad (J) inside of Adapter Bracket (K) and slide onto Upper Pole (F). Tighten the set
screw on Adapter Bracket (K) to secure using 4mm Allen Wrench (T-B). When positioning, ensure
that the set screw is facing the back and that the mounting holes are facing the front of the
assembled cart.
Attach Mounting Plate (O) to Adapter Brackets (K) using M6x10mm Screws (S-B), M6 Washers (M-I),
and 4mm Allen Wrench (T-B).
K
Back
Front
F
O
K
S-B
M-I
T-B
J
T-B

8
STEP 6
STEP 7
Clip Level (T-E) onto Mounting Plate (O).
Secure VESA Bracket Set (P) to back of TV using appropriate Screws (M-A thru M-G) with
Washers (M-H thru M-J), and Spacers (M-K thru M-M).
T-E
O
M-A thru M-G
M-H thru M-J
M-K thru M-M
P

9
STEP 8
Make adjustments as necessary to Adapter Brackets (K) to level out Mounting Plate (O). Tighten set
screws on Adapter Brackets (K) using 4mm Allen Wrench (T-B).
Hang TV with VESA Brackets (P) onto Mounting Plate (O). Tighten locking screws on VESA
Brackets (P) using the Phillips end on 5mm Allen Wrench (T-C).
T-B
K
O
P
O
T-C

10
STEP 9
Attach Shelf Supports (N) to Lower Poles (E) using M6x10mm Screws (S-B) and 4mm Allen
Wrench (T-B). Do not fully tighten screws yet.
Attach Shelf (M) to Shelf Supports (N)
using M4x6mm Screws (S-D) and the
Phillips end on 5mm Allen Wrench (T-C).
Fully tighten M6x10mm Screws (S-B)
with 4mm Allen Wrench (T-B).
Li up Base Cover (D) and install M5x6mm Set Screws (S-C) using 2.5mm Allen Wrench (T-A).
N
E
S-B
T-B
T-C
M
N
S-D
T-A
S-C
D
S-B
T-B

11
CABLE MANAGEMENT
Cable manage through the top of Upper Poles (F), the slots on Lower Poles (E), and through the
bottom of Base w/Cover (C).
OR
F
E
C
E
C

LAST UPDATED: 05/16/2023
REV1L
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303