Vivo CART-V07B User manual

Black 32” Mobile Presentation Cart
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/cart-v07b
SKU: CART-V07B
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x4)
M6x12
B(x11)
M5x12
C(x4)
M6x16
D (x1)
4mm Allen
Wrench
E (x1)
Wrench
F (x4)
Casters
G (x2)
Cable Tie
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF CART.
• USE TIPOVER RESTRAINT OR ANCHOR CART TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
ASSEMBLY STEPS
H (x1)
Desktop
I(x1)
Support
Bracket
K (x1)
Base
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
22lbs
(10kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
STEP 1
Assemble the support bracket (I) to the leg (J) using
M6x12 bolts (A) and tighten with the Allen wrench
(D). The beveled end of the support bracket should
be aligned with the front of the leg (J).
J(x1)
Leg

3
STEP 2
Assemble the base (K) to the leg using M6x16
bolts (C) and tighten with the Allen wrench (D).
Place the desktop (H) upside down on a flat
surface. Assemble the support bracket with leg
to the desktop using six M5x12 screws (B) and
tighten with the Phillips end of the Allen wrench
(D). Mount the handle to the desktop (H) using
M5x12 screws (B).
STEP 3
STEP 4
Carefully turn the assembled cart right side up.
Li the handle to raise and lower the desktop.
Screw the casters (F) into the base, and tighten
using the wrench (E). Install cable ties (G) to the
underside of the desktop to secure the handle
cable.
STEP 5

LAST UPDATED: 03/04/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303