Vivo CART-SR12U User manual

Black 12U Server Rack
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/cart-sr12u
SKU: CART-SR12U
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualied technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specied in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF CART.
• USE TIPOVER RESTRAINT OR ANCHOR CART TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
1200lbs
(544kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
A (x2)
Bottom Support
B (x2)
Vertical Support
Right
C (x2)
Vertical Support
Le
D (x8)
Adjustment
Support
E (x4)
Adjustment
Crossbar
F (x4)
Caster
G (x2)
Upper Support
H (x4)
Foot
S-A (x16)
M8x20mm Screw
S-B (x20)
M6x12mm Screw
S-C (x16)
Plastic Spacer
S-D (x16)
M6 Nut
S-E (x4)
M4x16mm Screw
I (x4)
Hook
T-A (x1)
Wrench
SOME HARDWARE INCLUDED MAY NOT BE USED.
For Accessories
S-B (x40)
M6x12mm Screw
S-C (x40)
Plastic Spacer
S-D (x40)
Fixed Buckle

3
ASSEMBLY STEPS
STEP 1
Slide Adjustment Supports (D) onto Adjustment Crossbars (E). Determine the maxium required
mounting depth for your equipment and use the associated Setting Numbers from the chart. Align the
Setting Numbers on the Adjustment Crossbar (E) with the inner rectangular cutouts on Adjustment
Supports (D) shown below (labeled “Read from here”). Assemble using M6x12mm Screws (S-B),
Plastic Spacers (S-C), and a Phillips screwdriver.
5 4 3 2 1 0 0 1 2 3 4 5
0
1
212
0
Read from here
D
E
S-B
S-C

4
STEP 2
Assemble Bottom Supports (A) and Adjustment Crossbars (E) with Adjustment Supports (D) to Vertical
Supports Le (C) using M8x20mm Screws (S-A) and Wrench (T-A). Connect the two assemblies with
Vertical Supports Right (B) as shown below using M8x20mm Screws (S-A) and Wrench (T-A).
T-A
S-A
C
A
BB
C
C
E/D
S-A

5
STEP 3
Secure Adjustment Crossbars (E) with Adjustment Supports (D) and Upper Supports (G) to Vertical
Supports Right (B) and Veritcal Supports Le (C) using M8x20mm Screws (S-A) and Wrench (T-A).
T-A
S-A
G
E/D
CB

6
STEP 4
Install Feet (H) to Bottom Supports (A). Assemble Casters (F) to the cart assembly using M6x12mm
Screws (S-B) with M6 Nuts (S-D) and Wrench (T-A).
B
T-A
S-B
S-D F
HA

7
STEP 5
Secure Hooks (I) to Vertical Supports Right (B) and Vertical Supports Le (C) using M4x16mm Screws
(S-E).
I
S-E
B
C

LAST UPDATED: 05/24/2022
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303