Vivo MOUNT-ALL02 User manual

Wall Mount Designed for Nintendo Switch
Instruction Manual
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/mount-all02
SKU: MOUNT-ALL02
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage
or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING!
ASSEMBLY STEPS
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A(x1) B(x1)
Elastic Band
W-B (x2)
Concrete
Anchor
STEP 1 - Wood Stud Installation
Hold Mount (A) up to desired location and mark mounting holes using a pencil. Use of a level and stud
finder is highly recommended. Drill marked locations 0.75” (19mm) deep using a 1/8” (3mm) drill bit.
Install Mount (A) to wall using ST4.2x25mm Screws (W-A) and a Phillips screwdriver.
PROCEED TO STEP 2
Phillips
Screwdriver
Stud
Finder Level
TOOLS NEEDED
W-A (x2)
ST4.2x25mm
Screw
2.2 lbs
(1kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
A
W-A

3
Wrap Elastic Band (B) around your device
and secure around the tabs on either side
of Mount (A).
Hold Mount (A) up to desired location and marking mounting holes using a pencil. Use of a level and
stud finder is highly recommended. Drill marked locations 1.2” (30mm) deep using a 15/64” (6mm) drill
bit. Press Concrete Anchors (W-B) into the drilled holes. Install Mount (A) to wall using ST4.2x25mm
Screws (W-A) and a Phillips screwdriver.
Place your device in Mount (A) and adjust the bracket
depth by loosening underside Wing Nuts (A1) and
sliding the bracket towards the device. Tighten Wing
Nuts (A1)once the device is snug.
STEP 1 - Concrete Wall Installation
STEP 2
A
W-B
W-A
A
A
B
A1

LAST UPDATED: 07/07/2023
REV2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303