Vivo STAND-V001T User manual

1
Single Monitor Extra Tall
Desk Mount
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Model: STAND V001T
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
Tools Required:
phillips screwdriver
Package Contents
C (x1
D (x1 E (x1 F (x1
H (x1 J (x1
K (x1
- M A (x4
M4x12
- M B (x4
M5x12
- M C (x4
D5
G (x2 I (x5
L (x1 M (x1
A (x1
B (x1
- -https://vivo us.com/products/stand v001t

2
Step 1: Option A
Assembly Steps
Slide the cable management clip (G) and base cover (H) on to the bottom
pole (B). Thread the bottom pole (B) onto the clamp (D). Tighten the grub
screws into the bottom of the clamp (D) using 3mm allen key (K). Secure the
clamp (D) to the desktop as shown in diagram.
Step 1: Option B
Remove the screw from the top of the bolt in the clamp (D). Stick the soft
pads (I) to the bottom of the grommet base (E).
Step 2
Slide the cable management
clip (G) over the bottom of the
top pole (C). Use the pole
connector (F) to attach the top
pole (C) to the bottom pole (B),
using the 3mm allen key (K).
Step 1: Option B (Continued
Slide the cable management clip (G) and base cover (H) on to the bottom
pole (B). Thread the bottom pole (B) onto the grommet base (E). Tighten
the grub screws in the bottom of the grommet base (E), using the 3mm
allen key (K). Slide the metal pad (J) over the bolt, then slide it through the
grommet hole in the bottom of the desktop. Thread into the bottom of the
pole (C).

3
Step 3
Tighten using the mm allen key (L).
Slide the arm (A) over the top of pole.
Secure using two more bolts (M-A or M-B) and washers (M-C) in the bottom
two holes. Tighten all four bolts using a phillips screwdriver.
Attach two bolts (M-A or M-B) and washers (M-C) to the top mounting
holes of your monitor, making sure to leave 3mm of threads exposed.
Align the bolts (M-A, M-B) in the VESA plate.
Step 4

4
If you do not understand these directions, or if you have
any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are
no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual.
We cannot be liable for damage or injury caused by
incorrect assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please
contact us. We are happy to replace parts to ensure you
have a fully functional product.
Safety Warning
Contact us at
Last updated: 4/30/2018
Step 5
Step 6
Store the allen keys (M, L) in the cable management clip (G) for future
adjustment. Adjust as desired.
Adjust the tension in the monitor bracket with 6mm allen key (M) as shown
in diagram.