Vivo MOUNT-CUB1 User manual

Cubicle Monitor Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-cub1
SKU: MOUNT-CUB1
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
TOOLS NEEDED
17.6lbs
(7.98kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A (x1)
Mount
M-F (x4)
Spacer
M-E (x4)
D5 Washer
M-A (x4)
M4x12
M-B (x4)
M4x16
M-C (x4)
M5x12
M-D (x4)
M5x16
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
Drill
B (x2)
Adhesive Pad
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
OPTION A
For a cubicle wall with a thickness from 63mm to 89mm, make sure the L-Bracket on mount (A) has
the short side facing out.
OPTION B
For a cubicle wall with a thickness from 37mm to 63mm, make sure the L-Bracket on mount (A) has
the long side facing out.
min37mm-max63mm
min63mm-max89mm

4
STEP 2
Apply adhesive pads (B) to mount (A) as shown.
STEP 3
Fit mount (A) to cubicle wall, and secure with the knob on top.
B

5
STEP 4
Remove the screw from the top of the VESA plate, and slide the VESA plate o of mount (A).
STEP 5
OPTION A: Flat Back Monitor
For flat back monitor, install VESA plate to monitor using screws (M-A or M-C) and washers (M-E).
M- A
M- C
M- E

6
STEP 5 (Continued)
OPTION B: Curved Back Monitor
For curved back monitor, install VESA plates to monitor using screws (M-B or M-D), washers (M-E),
and spacers (M-F).
STEP 6
Slide monitor onto mount (A) and secure with the previously removed screw.
M- B
M- D
M- E
M- F

7
STEP 7
Rotate monitor to desired position.
STEP 8
To adjust monitor height, pull the lever behind the monitor, then raise or lower as desired.
360°

LAST UPDATED: 03/05/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303