Vivo STAND-V002OU User manual

   

Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-  
 
phillips screwdriver
 
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
 (x1)
! (x2) (x1)
 (x2)
M6x10
" (x1)
M6x12
# (x1)  (x1)
$ (x5) % (x1) & (x1)
4mm
' (x1)
5mm
- (x4)
D5
-  (x4)
M4x12
-  ! (x4)
M5x12
- -())** +,)) *
-

,./ 
 0
-0 0
-0 
-0 .
Mount bracket (B) to bottom of gas spring arm (A)
using bolts (E). Tighten using 4mm allen key (J).
Attach clamp (C) to bracket (B) using bolts (D) and 4mm allen key (J) Mount
according to thickness of desktop as shown in diagrams 1a-2a and 1a-2b.
2
 0 1 2
-0 3
-0. 0
-0. 
Secure stand to desktop by
tightening clamp (C).
For grommet hole mounting,
drop carriage bolt (H) through
the center of grommet base (F).
Mount grommet base to
bottom of gas spring arm (A)
using bolts (E). Tighten using
4mm allen key (J).
Run carriage bolt (H) through grommet hole in desktop. Attach metal plate (I) and
wingnut (G). Tighten wingnut.

3
 3
 4
Adjust tension in gas spring arms (A) and monitor brackets using mm allen key (K).
Remove bottom plastic covers from gas spring arms (A) using phillips screwdriver end
of mm allen key (K).
 
Attach two bolts (M-A or M-B) and washers (M-C) to top mounting holes of monitors,
making sure to leave 3mm of threads exposed. Align bolts (M-A, M-B) in VESA plates.
Secure using two more bolts (M-A or M-B) and washers (M-C) in the bottom two
holes. Tighten all eight bolts using phillips screwdriver end of mm allen key (K).

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
5/ 6
  
Last updated: 04/30/18
7  
Run cables from monitors through bottom of gas spring arms (A). Reattach plastic
covers as shown in diagram.
 8
4