Vivo STAND V001S User manual

Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
Monito Des Mount
-Model STAND V001S
Tools Requied
phillips screwdriver
Pacage Contents
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
A (x1)
B (x1) C (x1)
D (x1)
E (x1)
F (x1) G (x2)
H (x1)
I (x1) J (x1) K (x1)
mm Allen Key
M-A (x4)
M4x12
M-B (x4)
M4x16
M-C (x4)
M x12
M-D (x4)
M x16
M-E (x4)
D
M-F (x4)
Spacer
- -https// i o us.com/poducts/stand 001s
1

Step 1
Step 2
Step 3
Insert Short Arm (A) into socket on Base (D) using a twisting motion to fully seat the arm.
Insert Long Arm (B) into socket on Short Arm (A) using a twisting motion to fully seat the arm.
Place Clamp Plate (F)
on top of clamp bolts in
Base (D) and evenly
tighten bolts to edge of
desktop.
Clamp will also fit a
grommet hole with a
minimum diameter of
60mm (2-3/8”).
Assembl& Steps
2
Step 4
Step 5
Option A Flat Bac Monito Option B Cu ed Bac Monito
Install VESA Plate (A)
to monitor using
bolts (M-A) or (M-C)
and washers (M-E).
For curved back
monitor, install VESA
plate (A) to monitor
using bolts (M-B) or
(M-D), washer (M-E),
and spacers (M-F).
Loosen bolt on Support Ring (H) using Allen Wrench (K). Fasten Support ring to pole at desired
height. Loosen bolt on mounting bracket (C) and slide onto pole. Tighten bolt to secure
mounting bracket to pole, or leave slightly loose for free swivel movement. Press Cap (J) onto
top of arm.

3
Step 8
Step 9
Store the Allen Keys in mounting bracket (C) for future use.
Install Cable Clips (G) to manage cables.
Step 6
Step 7
Slide the monitor onto the head of Mounting Bracket (C). Install Thumb Screw (I).
Make sure the screw is installed before you rotate the monitor.
If needed, adjust the bolt on the side of the hinge behind the VESA plate to tighten or loosen
the tilt angel.

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Safet& Waning
Contact us at
Last updated: 06/01/18
Step 10
Step 11
4